Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-Finance THENI | TAMIL NADU | 625203 | ₹13.6 L | L1 | Accepted-Finance Accepted Vide Resolution No.VII(1) dtd.05/06/2026 of pattambi municipality |
| 2 | L2₹14.2 L+₹61,682.50 (4.55%)Accepted-Finance | ₹14.2 L+₹61,682.50 (4.55%) | L2 | Accepted-Finance Second bidder. Kept in abeyance till the execution of agmnt by the First Bidder |
| Sl No | Description | Qty | Unit | AJITHKUMAR S. L2 | UNNI K L1 |
|---|---|---|---|---|---|
| 1.00Electrical Work | |||||
| 1.00 | OD11475/2026-2027:Supply, Conveyance, Erection, Testing and Commissioning of 50 h p Vertical Open well Submersible Motor Pump set, conforming to IS 14222 and motor conforming to IS 9283 with waterproof winding suitable to lift water to a height of 110 Meters at the rate of 45 Cum per hour with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Phase, 50 Hz A.C supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. (Make - Kirloskar, CRI, Crompton, Lubi, Decan) | 3 | each set | 3,28,567.9 ₹9,85,703.7 | 3,14,282.3 ₹9,42,846.9 Lowest |
| 1.00 | OD23402/2026-2027:Supply, Conveyance, Erection, Testing and Commissioning of 10 h p Vertical Open well Submersible Motor Pump set, with bronze/stainless steel impellor conforming to IS 14222 and motor conforming to IS 9283 with waterproof winding suitable to lift water to a height of 18 Meters at the rate of 50 Cum per hour with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Phase, 50 Hz A.C supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. (Make - Kirloskar, CRI, Crompton, Lubi, Decan) | 1 | each | 1,05,522.3 ₹1,05,522.3 | 1,00,934.4 ₹1,00,934.4 Lowest |
| 1.00 | OD24593/2026-2027:Rewinding of 50 HP, 2880 rpm, 3-phase induction motor Open well Submersible Pump.
Disconnecting electrical connection of the 50 HP, 2880 rpm motor, decoupling motor from pump, dismantling the motor from base plate, and safely shifting to nearest road by manual/mechanical means. Loading into vehicle and conveying to authorized workshop, including loading, unloading, and handling charges.
At workshop:
Dismantling the motor into stator and rotor assemblies. Removing burnt/damaged winding from stator slots, thoroughly cleaning the slots, and providing slot insulation with suitable class of insulation paper.
Rewinding: Rewinding the stator with good quality super enamelled copper wire of original gauge and class, providing proper inter-layer and phase insulation, wedging the slots with fibre glass wedges, making end connections, and providing new lead wires with proper insulation and lugging at both ends. Varnishing & Drying: Pre-heating the wound stator, impregnating with good quality insulating varnish by dip/oven process, and baking till completely cured.
Reassembling & Testing:
Reassembling the motor with existing/new bearings as required, testing for IR value, winding resistance, no-load current, and balance.
Re-installation:
Conveying the rewound motor back to pump house, refitting on existing base plate, aligning and coupling with pump, reconnecting electrical supply, and commissioning with trial run. Note: Cost of scrap copper wire recovered from burnt winding is deducted.
Standard:
Standard:
Work shall conform to IS 4029:2010 and IS 325:1996. One year warranty for rewinding work shall be furnished | 2 | each | 56,361.5 ₹1,12,723 | 53,911 ₹1,07,822 Lowest |
| 1.00 | OD23194/2026-2027:Rewinding of 40 HP, 1440 rpm, 3-phase induction motor:
Disconnecting electrical connection of the 40 HP, 1440 rpm motor, decoupling motor from pump, dismantling the motor from base plate, and safely shifting to nearest road by manual/mechanical means. Loading into vehicle and conveying to authorized workshop, including loading, unloading, and handling charges.
At workshop:
Dismantling the motor into stator and rotor assemblies. Removing burnt/damaged winding from stator slots, thoroughly cleaning the slots, and providing slot insulation with suitable class of insulation paper. Rewinding: Rewinding the stator with good quality super enamelled copper wire of original gauge and class, providing proper inter-layer and phase insulation, wedging the slots with fibre glass wedges, making end connections, and providing new lead wires with proper insulation and lugging at both ends. Varnishing & Drying: Pre-heating the wound stator, impregnating with good quality insulating varnish by dip/oven process, and baking till completely cured.
Reassembling & Testing:
Reassembling the motor with existing/new bearings as required, testing for IR value, winding resistance, no-load current, and balance.
Re-installation:
Conveying the rewound motor back to pump house, refitting on existing base plate, aligning and coupling with pump, reconnecting electrical supply, and commissioning with trial run. Note: Cost of scrap copper wire recovered from burnt winding is deducted.
Standard:
Standard:
Work shall conform to IS 4029:2010 and IS 325:1996. One year warranty for rewinding work shall be furnished | 1 | each set | 47,624.2 ₹47,624.2 | 45,553.6 ₹45,553.6 Lowest |
| 1.00 | OD24184/2026-2027:Labour charges for lifting and reinstallation of 50 HP submersible motor pump set
Lifting: Labour charges for lifting the existing 50 HP damaged vertical open well submersible pump set from the well through a height of 10 m, by erecting a tripod with chain block/pulley arrangement over the well, including dismantling the column pipes one by one with necessary tools, and safely shifting and stacking all dismantled materials at a convenient place near the well site.
Decoupling & Servicing: Decoupling the submersible motor from the pump, opening the pump casing, removing debris, silt, and foreign material lodged in the impeller and casing that obstructs free flow of water, cleaning all internal parts, checking wear ring and shaft clearance, and reassembling the pump to good working condition.
Reinstallation: Lowering the serviced pump set back into the well using tripod and chain block, jointing the column pipes with necessary rubber gaskets, bolts, nuts, and sealant, making delivery pipe connection, electrical cable connection with proper jointing and insulation, and commissioning the pump set.
Testing: Conducting trial run, checking discharge, current drawn, and ensuring satisfactory performance as per site requirement. Note: All tools, tackles, tripod, chain block, and safety equipment required for the work shall be arranged by the contractor. Work shall be carried out without damage to existing structures: | 8 | set | 19,446 ₹1,55,568 | 18,600.6 ₹1,48,804.8 Lowest |
| 1.01 | OD10612/2026-2027:Labour Charges for lifting the 50 hp submersible motor pump set from the sump using tripod and chain block, after dismantling the electrical connection, decoupling the 150mm GI delivery pipe, leading to the nearest roadside by head load and convey the same by vehicle to the nearest workshop | 1 | each set | 11,569.2 ₹11,569.2 | 11,066.2 ₹11,066.2 Lowest |
Tender Value
₹12.3 L
EMD Value
₹30,842
Closing Date
26 May 2026, 5:00 pmClosed
Assistant Engineer
LID EW Section, Pattambi Municipality
Renewal and Repairs of motor Pump sets in various wards Pattambi Municipality General Electrical Work
2026_LSGD_851697_3
02/AE/LSGD/PTB/MPTY/2026-27
Open Tender
Civil Works - Others
Item Rate
360 days
Pattambi Municipality
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹30,842
Yes
15 Sept 2026
18 May 2026
28 May 2026
18 May 2026
26 May 2026
18 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electrical Work | |||||
| 1.001 | OD11475/2026-2027:Supply, Conveyance, Erection, Testing and Commissioning of 50 h p Vertical Open well Submersible Motor Pump set, conforming to IS 14222 and motor conforming to IS 9283 with waterproof winding suitable to lift water to a height of 110 Meters at the rate of 45 Cum per hour with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Phase, 50 Hz A.C supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. (Make - Kirloskar, CRI, Crompton, Lubi, Decan) | - | each set | - | - |
| 1.002 | OD23402/2026-2027:Supply, Conveyance, Erection, Testing and Commissioning of 10 h p Vertical Open well Submersible Motor Pump set, with bronze/stainless steel impellor conforming to IS 14222 and motor conforming to IS 9283 with waterproof winding suitable to lift water to a height of 18 Meters at the rate of 50 Cum per hour with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Phase, 50 Hz A.C supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. (Make - Kirloskar, CRI, Crompton, Lubi, Decan) | - | each | - | - |
| 1.003 | OD24593/2026-2027:Rewinding of 50 HP, 2880 rpm, 3-phase induction motor Open well Submersible Pump.
Disconnecting electrical connection of the 50 HP, 2880 rpm motor, decoupling motor from pump, dismantling the motor from base plate, and safely shifting to nearest road by manual/mechanical means. Loading into vehicle and conveying to authorized workshop, including loading, unloading, and handling charges.
At workshop:
Dismantling the motor into stator and rotor assemblies. Removing burnt/damaged winding from stator slots, thoroughly cleaning the slots, and providing slot insulation with suitable class of insulation paper.
Rewinding: Rewinding the stator with good quality super enamelled copper wire of original gauge and class, providing proper inter-layer and phase insulation, wedging the slots with fibre glass wedges, making end connections, and providing new lead wires with proper insulation and lugging at both ends. Varnishing & Drying: Pre-heating the wound stator, impregnating with good quality insulating varnish by dip/oven process, and baking till completely cured.
Reassembling & Testing:
Reassembling the motor with existing/new bearings as required, testing for IR value, winding resistance, no-load current, and balance.
Re-installation:
Conveying the rewound motor back to pump house, refitting on existing base plate, aligning and coupling with pump, reconnecting electrical supply, and commissioning with trial run. Note: Cost of scrap copper wire recovered from burnt winding is deducted.
Standard:
Standard:
Work shall conform to IS 4029:2010 and IS 325:1996. One year warranty for rewinding work shall be furnished | - | each | - | - |
| 1.004 | OD23194/2026-2027:Rewinding of 40 HP, 1440 rpm, 3-phase induction motor:
Disconnecting electrical connection of the 40 HP, 1440 rpm motor, decoupling motor from pump, dismantling the motor from base plate, and safely shifting to nearest road by manual/mechanical means. Loading into vehicle and conveying to authorized workshop, including loading, unloading, and handling charges.
At workshop:
Dismantling the motor into stator and rotor assemblies. Removing burnt/damaged winding from stator slots, thoroughly cleaning the slots, and providing slot insulation with suitable class of insulation paper. Rewinding: Rewinding the stator with good quality super enamelled copper wire of original gauge and class, providing proper inter-layer and phase insulation, wedging the slots with fibre glass wedges, making end connections, and providing new lead wires with proper insulation and lugging at both ends. Varnishing & Drying: Pre-heating the wound stator, impregnating with good quality insulating varnish by dip/oven process, and baking till completely cured.
Reassembling & Testing:
Reassembling the motor with existing/new bearings as required, testing for IR value, winding resistance, no-load current, and balance.
Re-installation:
Conveying the rewound motor back to pump house, refitting on existing base plate, aligning and coupling with pump, reconnecting electrical supply, and commissioning with trial run. Note: Cost of scrap copper wire recovered from burnt winding is deducted.
Standard:
Standard:
Work shall conform to IS 4029:2010 and IS 325:1996. One year warranty for rewinding work shall be furnished | - | each set | - | - |
| 1.005 | OD24184/2026-2027:Labour charges for lifting and reinstallation of 50 HP submersible motor pump set
Lifting: Labour charges for lifting the existing 50 HP damaged vertical open well submersible pump set from the well through a height of 10 m, by erecting a tripod with chain block/pulley arrangement over the well, including dismantling the column pipes one by one with necessary tools, and safely shifting and stacking all dismantled materials at a convenient place near the well site.
Decoupling & Servicing: Decoupling the submersible motor from the pump, opening the pump casing, removing debris, silt, and foreign material lodged in the impeller and casing that obstructs free flow of water, cleaning all internal parts, checking wear ring and shaft clearance, and reassembling the pump to good working condition.
Reinstallation: Lowering the serviced pump set back into the well using tripod and chain block, jointing the column pipes with necessary rubber gaskets, bolts, nuts, and sealant, making delivery pipe connection, electrical cable connection with proper jointing and insulation, and commissioning the pump set.
Testing: Conducting trial run, checking discharge, current drawn, and ensuring satisfactory performance as per site requirement. Note: All tools, tackles, tripod, chain block, and safety equipment required for the work shall be arranged by the contractor. Work shall be carried out without damage to existing structures: | - | set | - | - |
| 1.006 | OD10612/2026-2027:Labour Charges for lifting the 50 hp submersible motor pump set from the sump using tripod and chain block, after dismantling the electrical connection, decoupling the 150mm GI delivery pipe, leading to the nearest roadside by head load and convey the same by vehicle to the nearest workshop | - | each set | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
BOQ_1439099.xls
BOQ • 0.30 MB
nit.pdf
Tender Documents • 1.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .