DEPOSIT-Renovation of control room at DIG office-General Civil Work

Amount

Renovation of Control Room

OD286119/2024-2025:Supplying, fabricating and fixing Typist/OA workstation tables as per the following specifications: 1) Size of main table : 900mm L x 600mm W x 750mm H Structure and finishing : Top side panel are made of 25 mm Marine Ply and rest are made of 16mm Marine Ply Finishing : All surface were finished with 1mm laminate of (suede finish). Laminates are fixed to plywood by machine pressing. Edges : All exposed edges are banding with best quality PVC edge band of 2mm thick. Fittings : cable manager and bushes are to be fixed as per the approved drawings including keyboard tray, foot rest and cpu platform. The rate of table including all material, labour and carriage charges etc complete.

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Bidder Name

MANU S S