Renovation of office building of Dharangadhara division office, Rajsitapur, Patdi, Dasada, Bavdi, Dhangadhara Rural & Town sub division, Store office of Dharangadhara division under Surendranagar Circle

Name of Work: renovation of office building of Dharangadhara division office, Rajsitapur, Patdi, Dasada,

Bavdi, Dhangadhara Rural & Town sub division, Store office of Dharangadhara division under

Surendranagar Circle

PARTCULARS OF ITEM QTY RATE PER AMOUNT

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Removing existing plasterwork including scaffolding &

2 throwing the stuff to a lead of 500 M radius etc. 460.00 23.40 Smt

complete as directed by E.I.C.

Dismentaling doors, windows, ventilatros etc. (wood

or steel) shutters including chowkhtas architraves,

3 holdfasts and other attachment etc. complete and 18.00 181.13 No.

stacking them within all lead and lift.(i) Not exceeding

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

Dismentling santtary fittings like wash basin, W.C pan

Indian and european type, flushing tank etc.including

stacking the materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(ii) G.I sheet roofing.

Dismentling steel work including distempering and

7 stacking the materials with all lead and lift. 615.00 3.63 Kg

Demolition Including stacking of serviceble materials

8 and disposal of unserviceable materials with all lead 8.00 1020.60 Cmt

and lift. (i) R.C.C work

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

smooth including necessary repairs to scratches

complete.-walls

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

12 smooth including necessary repairs to scratches 1670.00 12.46 Smt

complete.-ceiling

15 Scraping oil paint from steel and other metal surfae

and making the surface even(with hand scraping.) 440.00 48.83 Smt

A Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 500 meter.

16 (A) -Loose soil

17 (B) -Dense or Hard Soil

18 (C) -Hard murrum

19 (D) Soft rock not requiring blasting

B Excavation for foundation for depth from 1.5 Mt to

Mt. depth including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

21 (C) -Hard murrum

22 (D) -Soft rock not requiring blasting

24 Filling available excavated earth (excluding rock)

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering.

25 Filling in foundation and plinth with murrum or

selected soil brought from out side with any lead in

layers of 20 cm. Thickness including watering,

pnumatic ramming and consolidating etc. comp

26 Filling in plinth with sand under floor including

watering, ramming, consolidating and dressing etc. 3.50 420.69 Cmt

27 P/L cement concrete 1:3:6(1 CEMENT: 3-Coarse sand:

6 - Hand broken stone aggregate 40MM nominal Size)

and curing complete excluding the cost of formwork

in.- Foundations and plinth.

28 Providing and laying controlled cement concrete

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced concrete 8.40 4838.50 Cmt

work in (A) Foundations, footings,Base of columns

and Mass concrete

P/L controlled cement concrete M 200 and curing

complete including the cost of form work and

excluding reinforcement for reinforced complete

29 (A) - foundation footings, Base of Columns and mass

30 (C)- Beam, Lintel, chhajahs, Shelvas etc. upto floor

31 (C)- Slab, for upto floor two level. 4.75 7146.50 Cmt

32 (D)- Columns, Pillars Posts and Struts up to floor two

33 Providing TMT Bars confirming to IS 1786 FE 500D for

R.C.C. work including bending, binding and placing 11775.00 75.46 Kg

in position complete up to floor two level

34 Precast concrete block masonry (including quoin

blocks jamb blocks closer etc.) with solid concrete

blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone

aggregates of 20 mm and down grade) Foundation

and Plinth cement morter 1:6

35 Precast concrete block masonry (including quoin

blocks jamb blocks closer etc.) with solid concrete

blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone

aggregates of 20 mm and down grade) in Super

strucuture cement morter 1:6

36 Half Brick masonary in common burnt clay building

bricks having crushing strength not less than 35 Kg. /

Sqmt. in cement mortar 1:4 (1-Cement : 4-Coarse 24.00 645.22 Smt

Sand) in above Plinth level up to floor two level.

37 Providing 15 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even and 335.00 184.28 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For walls

38 Providing 10 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even and 110.00 161.91 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For Celling

39 20 mm. Thick sand faced cement plaster on walls up

to height 10 meters above ground level consisting of

12 mm. Thick backing coat of C.M. 1:3 (1 cement :

sand) and 8 mm. Thick finishing coat of C.M.. 1:1 (1

cement : 1 sand) etc. complete.

40 Providing cement vata 10 x10 cm size quarter round

in cement concrete in C.M. 1:1 including neat cement 220.00 23.45 Rmt

finishing watering etc. complete.

41 Providing and laying Broken China Mosaic flooring

for terrace using 12 mm to 20mm broken pieces of

glazed tiles to be laid over cement mortrar 1:3 to

plain or slope and to be tampred to bring mortar

creme out up to surface using white cement including 35.00 739.89 Smt

rounding off junctions and extending them up to

15cm along the wall, clearing with water and oxalic

acid etc. as directed.

42 Providing and laying 24" x 24" Vitrified 8mm thick

tiles flooring over 20mm (Average) base of Cement

Mortar 1:6 (1-Cement : 6 Coarse Sand) on new

surface or fixing on existing flooring by adhesive

materials including dismentalling of existing flooring 46.80 1192.28 Smt

and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface

etc. complete for Light Shade

43 Providing and laying Vitrified 8 to 10mm thick,in

skirting riser of steps and dedo on 10mm thick

cement plaster 1:3 (1-Cement : 3 Coarse Sand) and

jointed with white cement slurry.

44 Providing and laying Marble stone slab flooring over

20mm average base of cement mortar 1:6 (1 cement

: 6 coarse sand ) of L.M. 1:1.5 (1 lime putty :

coarse sand )and laid and jointed with gray cement

slurry including rubbing and poishing complete. (b)

Marble stone 25mm thick

45 Providing & Fixing 15 to 20 mm thick both side

polished green marble wall partitions 600mm wide &

required height & all sides polished, machine cut & of

approved quality including fixing the same in wall in

line & level etc. complete as directed by E.I.C

46 Providing and laying coloured glazed tiles of the size

in floring, skirting, risers of steps and dedo on 10mm 85.00 1403.33 Smt

thick cement plaster 1:3 (1-Cement : 3-Coarse sand)

& jointed with white cement slurry.

47 Providing and laying polished kotah stone slab

Flooring over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand )

or LM 1:1:5 (1 lime putty : 1.5 coarse sand )

laid over and jointed with grey cement Slurry 11.50 962.33 Smt

mixed with pigment to match the shade of slab

including rubbing and polishing etc. completed

48 Providing and laying Kotah stone slab 25 MM

thick in risers of steps, tread of steps, dedo

and pillars laid on 10 MM thick Cement Mortar

1:3 ( 1-Cement : 3 -Coarse sand )and jointed 2.00 1045.80 Smt

with grey cement slurry including necessary

groove and rubbing etc complete

49 Providing & laying 20 to 25mm thick, both faces

polished kotah stone with all edges machine

cut up to 450mm width and of required length

(only one piece to be used ) of approved quality 7.75 1105.50 Smt

for cupboard shelves including fixing the same

in masonry wall by cement mortar in three

sides including curing etc. complete as directed

50 Providing and laying Granite stone slab flooring

over 20mm average base of cement mortar

1:6 (1 cement : 6 coarse sand ) of L.M. 1:1.5 (1

lime putty : 1.5 coarse sand )and laid and 2.00 2857.59 Smt

jointed with gray cement slurry including

rubbing and poishing complete. (b) Granite

stone 18mm thick 1 side polished

51 Providing and fixing FRP frame 100X50 mm and

mm thick FRP depressed pannel shutter having extra

reinforcement on sides and edges and in Gel coat

finish.The core of the shutter & frame is to be filled

up with injected fire retardent grade polyurethane

foam done in situ along with embedded wooden

pieces for stiffening and also for taking hinges and all

fixures. The whole FRP Frame and shutter is to be 15.10 2354.22 Smt

water proof, weather proof, termite proof and

resistance to mild acid/alkali.Rates are to be inclusive

of S.S. hinges with necessary screws and allumunium

fixtures & fastening & fastener sleeve.

52 Providing and fixing 12 mm toughened glass door

fixing with Ozone make floor spring, SS door handle

as per approved design, door edge molding etc.

Complete with applying designer blackout film on 2.10 7674.00 Smt

door with all required accessories, labour and

transportation complete as directed by engineer in

53 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 30mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door & teak

wood leaping all-round including 100X75mm.

teak wood frame.If necessary with glass looking

window with T.W. batten and polishing /Colour.

Rates are without fixtures & fastening but with 4.35 3346.00 Smt

3 NO. of 100mm. long butt or parliamentary

hinges on each flap of double shutter & 150mm.

long hinges for single shutter and 3 NO. of M.S.

flat hold fast grouted in C.C. (1:2:4) on each

side of frame, 3 coats of oil painting of

approved shades make etc., complete as per

drawing & as directed by E.I.C.

54 Providing and fixing fully glazed/partly glazed

Single door shutter made, frame of

10.15cmX4.45cm aluminum section, and

Shutter-Top & vertical section of 8.5cmX4.45cm

size and bottom section of 11.40X4.45cm size,

using 5mm thick "TRIVENI" or HB4 plain glass 7.90 4081.50 Smt

glazing deep rubber gasket with locking

arrangement, all fixtures & fastening of

anodized section with all labours & materials

etc. complete as per drawing & as directed by

EIC Complete as per drawing and as directed by

55 Providing and fixing Window having extruded

Alluminium Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95mm (of Jindal Section

No. 4605, @ Wt. 1.094 Kg./Rmt.), horizontal two

track member size 61.85mm x 31.75mm x 1.20mm

(of Jindal Section No. 8687 @ Wt. of 0.695 Kg./mt.),

vertical member of size 61.85mm x 31.75mm x

1.30mm (of Jindal Section No. 8758 @ Wt. of

Kg./mt.) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section No. 23.70 1696.73 Smt

8949 @ Wt. of 0.456 Kg./mt.), vertical member of size

40mm x 18mm x 1.29mm (of Jindal Section No.

@ Wt. of 0.456 Kg./mt. / Section 8948 @ Wt.

Kg./mt) with 5mm thick transparent bronze colour

tinted float glass with powder coated alluminium

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per detailes etc. complete for

56 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x 1.2mm

(Jindal Section :2434, @ Wt. 0.643 kg per mt with

colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

57 Providing & fixing fittings in position Partly panel and

Partly Glazed aluminium (alloy - HE - 9 WP ) frame

partition using aluminium 'c' section in the

dimensions of 23.6mmx21.8mm to be used for top,

bottom and side ends aluminium 'H' sections in the

dimensions of 23.6x60mm outer dimensions to be

used for intermediate support, the vertical &

horizontal members to be joined and with concealed

aluminium angle cleat panel to be made from 5 mm

thick HB4 or "Triveni" make plain glass fixed with

glazing clip rubber gasket with aluminium beeding of

required size incl. all fixtures & fastenings including

providing anti glare sun control film as per drawings

& details with rubber on all four side for air tight

fitting with all taxes wastage labour etc completed as

directed by E.I.C.

58 Providing & fixing MS plain grills of required pattern

to wooden frames of windows and gap filling of wall

etc. with MS flats or M.S, pipes at required spacing

and frame all- round square or round bars with round 50.00 105.17 Kg

headed bolts and nuts or by screws with one coat red

oxide & two coat of oil paint (A) plain grill

59 Providing & Fixing Flat Latch ( Aluminium )

60 Providing & Fixing Handle ( Aluminium )

61 Providing & Fixing Door Stopper (Aluminium )

62 Providing & Fixing Tower Bolt (Stainless steel) -

63 Providing & Fixing S.S best Chromium plated Aldrop -

12MM dia. & 200MM long.

64 Providing & Fixing S.S best Chromium plated Aldrop -

14MM dia. & 300MM long.

65 Providing & Fixing Brass C.P. Mortise Lock

(standard Make) with Handle of approved 8.00 1127.00 No.

66 Providing & Fixing MS CP door stay double leg 11.00 120.00 No.

67 Providing & Fixing of ISI approved quality hydraulic

door closer as directed.

68 Capsule door close 8.00 270.00 No.

Providing & Fixing readymade P.V.C. water tight

storage tank made from linear low density

polyethylene & low density polyethylene LDPF

product confirming to I.S: 10146 1982 with cover

including providing & fixing one 20mm.dia. Float

valve ball cock, one 2----1000 Lit.

Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials....15mm dia.

Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.....25mm dia.

Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.....32mm dia.

Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

73 at every two metre C/C or shall be concelled as 85.00 193.73 Rmt

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.......50mm dia

Providing and fixing ISI quality heavy gum metal

74 check or non return valve full way wheel valve - 8.00 416.47 No.

Providing and fixing ISI quality heavy gum metal

75 check or non return valve full way wheel valve - 8.00 656.86 No.

76 Providing & fixing to wall, ceiling, floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 4 Kg. /cm2 working pressure

polythene pipes incl. joining with approved solution&

all fittings like bend, tee. Y bend plug bend with water

tight joints ( Finolex or equivalent for rainwater etc.

77 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 9.00 150.00 No.

- 15mm.dia. Valve.

78 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 9.00 200.00 No.

- 25mm.dia. Valve.

79 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 9.00 250.00 No.

- 32mm.dia. Valve.

80 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 9.00 275.00 No.

- 50mm.dia. Valve.

81 Providing and fixing wash down closet (European

W.C. Pan) with integral "P" or "S" trap and PVC

flushing tank cistern with fittings and incl. plastic seat

and cover with brass hinges and rubber buffersand

PVC connector , nozzle etc. including jointing tr

82 Providing and fixing water closet squatting orrissa pan

(India type W.C. Pan) size 580 mm integral footrest

and 100 mm P or S trap and including 25 mm dia.

C.P. brass flush valve and inlet connection etc. 7.00 1642.00 No.

comp. - vitreous china long pattern white

83 Providing & Fixing colour porcelain lip shaped wall

type URINAL PAN of approved quality & make

including waste coupling bends & necessary

outlet of 25mm.dia. G.I Pipe connections

including providing,flush cock, P.V.C. 9.00 1502.06 No.

connection etc., complete

84 Providing & fixing best INDIAN make coloured

porcelain rectangular wash hand basin size

550X450mm. with C.I. Brackets fixed in wall

including approved quality of 1 No. of brass C.P

Pillar cock with ceramic assembly 15mm.dia.

Bottle trap, one brass C.P.

85 Providing & fixing PVC SWR nahni trap IS 14735 for

drain - 75mm diameterr with Jali of the following

nominal diameter of self cleansinf design with CI

scread down of higed grating including the cost of 15.00 541.80 No.

cutting and making good the walls.

86 Providing and fixing S.W Gully trap with C.I

Grating brick masonary chamber and water tight

C.I cover with frame of 300MM x 300MM size 8.00 1234.57 No.

(inside) with standard weight. [I] Square mouth

traps. [B] 150MM x 100MM size 'P' or 'R' type.

87 Providing and fixing screw down quarter turn bib taps

of following size -Brass cromium plated screw down 34.00 184.98 No.

bib tap -15 mm dia.

88 Providing & Fixing Bib tap two way 12.00 800.00 No.

89 Providing & Fixing Jet spray 6.00 1050.00 No.

90 Providing & Fixing Flush tank 6.00 800.00 No.

91 Providing & Fixing Seat cover for W.C Pan 6.00 401.00 No.

92 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light type C.I.

Cover with frame, necessary excavation bottom

concreting of .C.C. (1:3:6) 150mm. thick/ 225mm.

thick B.B. Masonry in C.M.(1:6) 12mm thick cement

plaster in C.M.(1:3) inside & to all exposed faces up

to 300mm. below ground level, curing etc., including

disposal off surplus excavated earth up to radius of 7.00 4152.50 No.

300 mt. including 3 coats of white or colour wash to

all exposed finished surface etc. complete as

directed by E.I.C., with free supply of cement by the

Board (B.B.MASONRY UPTO 1000mm. DEPTH.)--

300X300 mm clear size

93 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light type C.I.

Cover with frame, necessary excavation bottom

concreting of .C.C. (1:3:6) 150mm. thick/ 225mm.

thick B.B. Masonry in C.M.(1:6) 12mm thick cement

plaster in C.M.(1:3) inside & to all exposed faces up

to 300mm. below ground level, curing etc., including

disposal off surplus excavated earth up to radius of

300 mt. including 3 coats of white or colour wash to 6.00 5461.00 No.

all exposed finished surface etc. complete as

directed by E.I.C., with free supply of cement by the

Board (B.B.MASONRY UPTO 1000mm. DEPTH.)--

600x450mm clear size

94 Providing & Fixing light type C.I. Manhole covers with

water tight C.I. Frame & fixing the same in concrete

etc., complete as directed by E.I.C. 600mm x 450mm 9.00 948.68 No.

size not less than 35 kg.

95 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -75mm Dia.

96 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope - 90 mm Dia.

97 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -110 mm Dia.

98 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -160 mm Dia.

99 Providing & Fixing 600X450X6mm. thick size

approved best quality of looking glass mirror Modi or

gold fish, mounted on 6mm thick ply with edging with 8.00 825.48 No.

PVC angle patti as directed with fixture as required.

100 P/F brass towel rail complete with C.P. Brass brackets

fixed with C.P. Brass screws.-600 X20 mm size. 8.00 597.22 No.

101 Providing 2500mm internal diameter & 3.0 Mt. Deep

soak pit including excavation in all types of soil & soft

rock & CC(1:3:6) bedding, 300 mm thick below

masonry and 450mm thick B.B Masonry in CM(1:6)

up to 600mm height, 350mm thick for further

600mm and 230mm thick for remaining height honey

combed, plastering in CM(1:3) outside up to 1.5 Mt

height and 100mm thick M200 RCC slab with

600x600mm C.I.HEAVY duty cover with frame, with

necessary reinforcement as per design & C.I Vent pipe 1.00 64630.00 No.

1800mm long with B.B masonry pillar 350x350x450

plastered all around filling with 40 to 50mm size brick

bats up to 1.5 Mt depth, including 16mm dia M.S’U’

shape steps, refilling including disposal of the surplus

excavated earth up to the lead of 500mt. Radius

including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by

103 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

104 Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth.- in wall

105 Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth.-in Ceiling

106 Providing & applying 1 coat of approved make of

primer paint including scaffolding etc., complete as 6650.00 28.00 Smt

directed by E.I.C.

107 Finishing Wall with Weather Proof Exterior Emulsion

Paint on Wall Surface (Two Coats) to give an required

shape even shade after thoroguhly brushing the

surface to remove all dirt, and remains of loose

powdered materials etc. complete

108 Appliying priming coat over new wood and wood

based surface after and including preparing the

surface by throughly cleaning oil, grease, dirt and

other foreign matter, sand papering and knotting. (C)

Ready mixed paint brushing priming for enamel

109 Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint,

interior to give an even shade including cleaning the 490.00 88.37 Smt

surface of all dirt, dust and other foreign matter sand

papering and stopping.

110 Providing and fixing in position callapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with

top and bottom rails of T_rin 40x 40 x 6 mm with

38mm dia, steel pulleys complete with bolts, nuts, 3.50 5767.65 qntl

locking arrangements, stoppers handles including

applying a priming coat of read lead paint.

111 Providing and fixing rolling shutters of approved

make made of 80MM wide M.S. laths inter-

locked together thorough their entire length and

jointed together at the ends by end locks

mounted on specially designed pipe shaft with

bracket plates, guide channels and 5.10 3468.72 Smt

arrangements for inside and outside locking with

push-pull operation with gear system including

the cost of hood cover and spring etc.

complete, of approved guage by EIC. [A]

Shutters having width below 3.5M.

112 P & F steel cupboard shutter of 20 gauge with

steel frame & fixing the frame with brick

masonary including locking arrangement with

coat of primer ( red oxide ) i.e asian, dulux or 48.50 3437.50 Smt

its equivalent and 3 coats of approved oil paint

i.e asian, dulux or its equivalent etc. complete

as per requirement and instruction of EIC.

113 Providing & fixing of wall cupboard shutters using

18MM plywood with Wood Framing size of 25 x

mm, decorative laminate of approved shade &

brand on front side and backside with white

laminated sheet. Including finishing with beading

patti and polishing the same. Fixing of door with

hinges, one number of magnet and door handle on

each door and one number of door lock and stopper

for locking arrangement good quality etc. Complete

including materials and labour as direction of

Engineer in charge.

114 Fabrication of MS angle, channel, girder etc. as

per design and drawings including cutting,

welding the section, necessary nut, bolts and

one coat of red primer and 2 coats of oil

painting of approved shade with free supply of

structutal steel only by the company.

115 Steel work welded in built up setions, framed

work including cutting, hoisting, fixing in

position and applying a priming coat of red lead

paint and two coats of oil paint:- (A) In beams

and joists, channels angles Tees, flats, 830.00 94.58 kg

with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the

116 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick Densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long

main ‘T’ bottomexposed with 24mm of all T-sections shall be pre-painted with

polyester baked paint, for all heights, as per specifications, drawings and as

directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area

will be measured from wall to wall. No deduction shall be made for exposed

frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

117 Providing corrugated G.I. sheet of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.60 mm thick sheet.

118 Providing and fixing precast rubber dye inter locking

concrete block 60mm thick with grade of concrete M-

200 pnumatic comressed by mechanically pressed

and as per approved design including 75mm sand 895.00 677.11 Smt

layer for levelling and filling the joint with sand in

proper line and level etc comp as per directed.

119 Providing & fixing G.I. Barbed wire fencing

(12/14 Gauge) having mass and uniformity of

Zinc coating & specifications shall be as per IS

minimum 70 micron coating having 6 horizontal 25.00 155.50 Rmt

rows & 2 diagonals, fixing with angle posts by

means of G.I. U pins or with R.C.C. poles by

Gauge G.I. Wire as per drawing etc., complete

as directed by E.I.C.

120 Constructing 125 mm thick Controlled cement

concrete M- 200 Grade with Trimix Vacumm

dewatering system with power trowling sheet

form work with M.S. channels, srinking of fair

hardness, Non oxidzing, Non metalic, heavy duty

floor hardner of FOSROC or equivalent at the 929.00 592.00 Smt

rate of 0.50 Kg./Sq.M. with 10 mm x 10 mm

size groove cutting in concrete as

constructution joint and 12 mm thick premix

expansion joint at every 20 Meter lengthwith

necessary equipments, labors as per design etc.

121 Supplying & Spreading of quarry spall for filling of

yard etc., complete.including spreading of

quarry west in 150 mm thick layers with

required grade with watering rolling the each 241.00 692.00 Cmt

layer with 8 to 10 tones power roller etc.,

complete as directed by E.I.C.(Box

measurement will be paid with 15% deduction of

voids).For Yard work.

122 Supplying & stacking murrum of approved quality

including Spreading,Watering consolidating By

to 10 tonnes power roller transportation, filling 735.00 518.20 Cmt

the boxes etc. completed as directed. (Box

measurement will be paid with 15% deduction of

123 Supplying & Spreading of stone dust for filling of

yard etc., complete.including spreading of stone

dust in 100 mm thick layers with required grade

with watering rolling the each layer with 8 to

tones power roller etc., complete as directed by

124 Clearing and grubbing road land including

Dressing & Leveling uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to

300 mm removal of stumps of trees cut earlier 1700.00 13.00 SMT

and disposal of unserviceable materials(A) By

manual means in area of light jungle

125 Repairing & Refixing Of Door/Window/CB Etc. As

Directed By EIC.

126 Providing & fixing sliding gate of 40mm. Dia Mild

Steel Pipe 'B' class all round and 20mm. Dia. Mild

Steel Pipe at 200mm. C/C and 12mm. Mild Steel

Square bars at 200mm. C/C alternatively (i.e ONE

BETWEEN TWO PIPES) verically welded to 40mm. Dia.

Pipe. frame as per drawing and design with necessary

brackets, hold fasts, locking arrangement on top &

aldrop on both sides including base rail for sliding the 12.00 2294.00 Smt

gate having ball bearing rollers & guide track of

50X50X6 mm MS Angle with hold fast, fabrication of

side supports including fixing 'PGVCL' lettters on front

side etc., complete with three coats of approved oil

painting & one coat of red oxide primer as directed by

127 Providing and fixing wall cupboards, of 18" depth

using 18MM plywood for sides & shutters, 6MM

plywood at backside laminate of approved shade for

all sides and inside white laminate including

materials such as beading strips, handles, magnets,

adhesive having good quality of locking arrangements

including labour complete in all respect as directed by

128 Applying general insecticide pest control

treatment to floors, cupboards etc including

labour material etc. complete. Using

Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is

recommended one litre chemical emulsion 749.00 36.86 Smt

dillute with 39 liter of water will give. Total

dillute concrentration will be 40 litre inclusive

of one litre chemical emulsion appication

Litre chemical / Sqm of surface is recommended

129 Providing & laying Water proofing treatment on

terrace including applying water proofing component -

Asian Paints SmartCare Damp Proof or it's equivalent

product at rate of forced coverage of 0.93 sq.

mtr/L or 10 Sq. ft/L after thoroughly preparing of

Terrace in terms of repair work and cleaning to

remove grease, dust, loose particles, and other 50.00 326.00 Smt

elements cleaning the existing china mosaic flooring,

including filling of creck of any surface by SmartCare

Crack Seal or it's equivalent atlist 1 day curing before

the main treatment, after finishing the whole terrace

shall be flooded 75mm deep with water for a period

130 Providing and applying of polymer plaster of Sikka

Top F 122 polymer modified repair mortar or its

equivalent to repair RCC Slab etc elements inclusive

of surface preparation by removal of all disintegrated

materials, reinforcement in any, cleaning the

concrete surface with metal wire brush, exposing the

surface of reinforcement and applying two coat of

Alkaline Rust Converter of approved quality and

brand @ 10 m2/Ltr/Coat followed by one coat of

Migratory Corrosion inhibitor of approved quality and

brand @ 4 m2/Ltr/Coat to arrest the corrosion in

embedded concrete. (The rust converter shall be

alkaline in nature and its PH shall be around 8.5),

Applying two coats of interpenetreting polymer 75.00 1653.00 Smt

network of approved quality @ 5 m2/Ltr/Co at rebar

coating to the exposed reinforcement and then

applying of Sikka Top F 122 polymer based ready to

use mortar or its equivalent and fininshing the

surface as per actual thickness required as per

manufracture specification & engineer's instruction,

item Includes transportation of men, material, testing

and use of materials as per manufacturer

specification & required machinaries, scaffolding,

making working platform etc completed as directed

by Engineer In Charge.

131 Providing and fixing MS wire mesh(Chicken mash)

at every joint of masonary and concrete or any

joint for application with plastering the surface

includding fixing with surface with necessary

tools & tackels and fittings as directed by

Engineer in charge.

(B) Bidder's Offer % Above/Below of (A)

(C) Grand Total (C = A + B%)

(C) Grand Total (C = A + B%)

(D) Goods & Service Tax ( D = C x GST in % _________ )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Chief Engineer(Material)

PGVCL, Corporate Office