Setting up of 300 beded Mother and Child Hub at Anupnagar

Amount

Supply, erection, testing & commissioning of Electrical Motor driven main pump, horizontal centrifugal type, suitable for operation on 415 volts ± 10%, 3 phase, 50 Hz, AC supply. The duty parameters of main fire pumps shall be 2850 LPM at 70 MWC. The pump shall be coupled with squirrel cage induction motor, TEFC type of suitable KW having speed of 2900 RPM with IP 55 protection & class F insulation. Pump shall have C.I. casing, bronze impeller(dynamically balanced), SS-410 shaft with gland pack. Other accessories like common base frame, foundation bolts, flexible coupling, coupling guards etc to be supplied along with the pumps.The pump should be factory fitted on common base frame and to be erected at site on RCC foundation with proper anti vibration pad. RCC foundation shall be of owner scope. The pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head, The shut off head shall not exceed 120% of rated head.

Supply, erection, testing & commissioning of Diesel Engine driven common standby pump, horizontal centrifugal type, suitable for automatic operation. The duty parameters of standby fire pumps shall be 2850 LPM at 70 MWC. The pump shall be coupled with radiator cooled diesel engine of speed 1800 RPM with auto starting mechanism and shall be equipped with other accessories as required including fuel tank(fabricated from 3 mm MS sheet, painted with two coates of synthetic enamel paint over a coat of primer) of capacity adequate to sustain continuous pump operation for 4 hours. The tank shall be fitted with magnetic oil level indicator, MH with cover, drain valve, air vent including structural support etc. Necessary battery to be supplied along with the diesel engine. Pump shall have C.I. casing, bronze impeller(dynamically balanced), SS-410 shaft with gland pack. Other accessories like common base frame, foundation bolts, flexible coupling, coupling guards etc to be supplied along with the pumps.The pump should be factory fitted on common base frame and to be erected at site on RCC foundation with proper anti vibration pad. RCC foundation shall be of owner scope. The pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head, The shut off head shall not exceed 120% of rated head.

Supply, erection, testing & commissioning of electric motor driven Jockey Pump, horizontal type, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz AC supply. The duty parameter of jockey pump shall be 180LPM at 70 MWC. The pump shall coupled to squirrel cage induction motor, TEFC type having suitable KW with speed of 2900 RPM. The pump components shall made of stainless steel with gland pack arrangement. Necessary accessories with foundation bolts etc to be supplied to complete the erection. Foundation required to erect the pump shall be of owner's scope.

Supply, Erection, testing & commissioning of compartmentalised common control panel for Electrical Motor driven pumps as per technical specification attached with this tender document. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The pane shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height. The panel should have sufficient(min. 6 nos per pump set) NO / NC contacts for extending the status of fire pumps to the fire alarm panel.

Supply, laying, testing & commissioning of FRLS, PVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid out doors shall include the price of earth excavation providing brick and sand protection, refilling and compacting the earth. 3.5C x 70 sq.mm YFY for main pump

2C x 1.5 sq.mm for instrumentation

4C x 10 sq.mm YFY for Jockey Pump

12C x 1.5 sq.mm YFY for Diesel Pump

GI earthing strips of 40mm x 4.5mm thick, strips shall run on floor / ceiling / walls, from pump to control panel with necessary accessories as required.

25 Sq.mm single core multistrand copper cable shall be run on floor / ceiling / walls, from the nearest earth bar to the pump control panel with necessary accessories as required.

Supply & installation of dial type Pressure Gauge of suitable pressure range, fitted with dampner arrangement and isolation ball valve as shown in respective drawing. The diameter of dial shall be 150 mm preferably filled up with glyserine. All other necessary fittings to be supplied to erect the gauge on pump header.

Supply and installation of Pressure Switches, SPDT type, of suitable range, fitted with dampner arrangement and isolation ball valves as shown in respective drawing for pump automation. All other required fittings to be supplied to erect the pressure switch on pump delivery header.

Supply, erection and testing of heavy grade(class-C) pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope. 250 mm NB x 6 mm thk

200 mm NB x 6 mm thk

Supply, installation, testing & commissioning of CI Sluice Valve as per IS:14846 (PN 16), Rising Spindle type with matching flanges complete with nuts & bolts. Size 200 mm NB

Size 150 mm NB

Size 65 mm NB

Size 50 mm NB

Supply, installation, testing & commisssioning of swinging type CI Non return Valve as per IS:5312(PN16 rating) with matching flanges, bolts, nuts and gaskets. Size 200 mm NB

Size 150 mm NB

Size 65 mm NB

Size 50 mm NB

Supply, installation, testing & commissioning of CI Globe Valve as per IS:9338(PN10 rating) with matching flanges, bolts, nuts and gaskets. Size 100 mm NB

Size 50 mm NB

Supply & installation of GM / SS 4 way Fire Brigade Inlet with 63 mm dia instantaneous type coupling and 150 dia flanged outlet. Each inlet coupling shall be without built in check valve. The inlets shall conform IS:904.The inlet connection shall be mounted on fire water reservoir.

Supply & installation of 150NB GM / SS Fire Brigade Draw out connection with necessary foot valve with strainer.

Supply,Installation, testing & commisssioning of CI Foot valve with Strainer Size 200 mm NB

Size 80 mm NB

Priming arrangement of 2000ltrs capacity for negative suction to be provided by the erection vendor including necessary tank and other structural support. Valves required are indicated elsewhere.

HYDRANT SYSTEM Supply, erection and testing of heavy grade(class-C) pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope. 150 mm NB

Supply, installtion, testing and commissioning of swinging type CI Non return Valve as per IS:5312 with SS trim including matching flanges, nuts, bolts and gaskets. Size 150 mm NB

Supply, installation, testing & commissioning of CI Sluice Valve as per IS:14846 (PN 16), Rising Spindle type with matching flanges complete with nuts & bolts. Size 150 mm NB

Supply, installation, testing & commissioning of CI Butterfly valve as per BS :5155 (Wafer type) with matching flanges,nuts & bolts and gasket. 150 mm NB

Supply and installation of Globe Valves in Bronze Construction to IS: 778 with screwed ends 25 NB size

Supply, installation of automatic 25 NB Air Release Valve

Supply & installation of GM / SS oblique type single headed Landing valve with 80 mm inlet and 63 mm outlet GM / SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts.

Supply & installation of GM / SS oblique type single headed Hydrant valve with 80 mm inlet and 63 mm outlet GM / SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts.

Supply & installation of GM / SS branch pipe with 20 mm nozzle conforming to IS : 903.

Supply & installation of 63 mm dia reinforced rubber line hose pipe in 15 m length conforming to IS : 636 Type II ISI marked with GM/SS male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire.

Supply & installation of hose box, fabricated from 16 SWG CRCA sheet, double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm).

Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer. The length of hose shall be with 30 m with 20 mm dia. Working pressure rating shall be 18 kg/sq. The pipe shall be coupled with SS/GM self closing shut – off nozzle of 5 mm outlet.

Supply & installation of GM / SS 3 way Fire Brigade Inlet with 63 mm dia instantaneous type coupling and 150 dia flanged outlet. Each inlet coupling shall be with built in check valve. The inlets shall conform IS:904.The inlet connection shall be mounted on external network.

Supply & installation of GM / SS 2 way Fire Brigade Inlet with 63 mm dia instantaneous type coupling and 100 dia flanged outlet. Each inlet coupling shall be with built in check valve. The inlets shall conform IS:904.The inlet connection shall be mounted on hydrant riser.

Supply & installation of dial type Pressure Gauge of suitable pressure range, fitted with dampner arrangement and isolation ball valve as shown in respective drawing. The diameter of dial shall be 150 mm preferably filled up with glyserine. All other necessary fittings to be supplied to erect the gauge on top of the riser.

AUTOMATIC SPRINKLER SYSTEM. Supply, erection and testing of heavy grade(class-C) pipes conforming to IS-1239 / IS-3589 including all fittings viz. tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamps shall be supplied to fix the pipes on ceiling wall etc. including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be of vendor's scope. Necessary painting with 2 coats of primer and 2 coats of synthetic enamel paints to be done and supply of paints shall be with vendor's scope. 150 mm NB

Supply & installation of SS Sprinkler Head , K-80, chrome finish. Pendent type

Supply & fixing of Installation Control Valve complete with trims & gong 150NB

Supply, installation, testing & commissioning of CI Sluice Valve as per IS:14846 (PN 16), Rising Spindle type with matching flanges complete with nuts & bolts. 150NB

Supply, installation, testing & commissioning of CI Butterfly valve as per BS :5155 (Wafer type) with matching flanges,nuts & bolts and gasket. 150 mm NB

Supply and installation of Globe Valves in Bronze Construction to IS: 778 with screwed ends. 40 mm NB

Supply, installation of automatic 25 NB Air Release Valve

Supply & installation of dial type Pressure Gauge of suitable pressure range, fitted with dampner arrangement and isolation ball valve as shown in respective drawing. The diameter of dial shall be 150 mm preferably filled up with glyserine. All other necessary fittings to be supplied to erect the gauge on top of the riser.

PORTABLE EXTINGUISHERS Supply & fixing of 4Kg dry power extinguisher consisting of welded MS cylindrical body with discharge valve, nozzle & CO2 cartage and hanging arrangement complete conforming to IS:2171

Supply & fixing of 9 Litre Water type CO2 (ISI marked) extinguisher including all accessories with wall bracket & raw plug conforming to IS:940

Providing & fixing 9 Litre Foam type (ISI marked) extinguisher including all accessories with wall bracket & raw plug confirming to IS:10204

Supply & fixing of 4.5Kg carbon-di-oxide fire extinguishers (ISI Marked) consisting of welded MS cylindrical body, squeeze, lever discharge valve, fitted with internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, finished externally with red enamel paint and fixed to wall with brackets with rawlplug/ dash fastners complete with internal charge conforming to IS:2878.

SIGNAGES Supply and installation in position the "FIRE EXIT" Sign with luminicent colour having size 300 x 100 mm.

Supply and fixing in position the signages " FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm. ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION. EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS. BE CALM AND DO NOT GET PANIC, WALK DO NOT RUNIF POSSIBLE TRY TO EXTINGUISH FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER. (Make-MINIMAX / FIRESHIELD/ SAFEX )

Supply and fixing signage with printed " IN CASE OF FIRE, DO NOT USE LIFT. USE STAIRS ONLY" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.

FIRE EXTINCT

B.B.R.C. INFRASTRUCTURE (P) LTD.

MRA Nirman Udyog