Construction of School Building at Govt. Middle School Shalipora

Clearance of Site by way of engaging of JCB removal of roots, stumps of reviously felling of trees of the girth (measured at a height of 1m above ground level) including disposal of debris beyond limits in ecofreindly manner complete as desired and directed by the Engineer incharge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and Laying of Stone Soling (duly hand packed) incld. Watering dressing and ramming with all carriages loading unloading and stacking etc complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced Cement Concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate including cost of carriages of materials involved

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level: with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for foundation, footings etc.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landlings, balconies and access platforms

Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand)including extra over brick work in superstructure above plinth level upto floor five level including curing.

Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood'

Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling (approved imported wood) 35mm thick

Providing & fixing decorative plywood B/S decorative veneer (Type 1) confirming to IS 1328 BWR type

Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size

12mm Cement Plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand) including cost of all material,skyfoulding for outside & curing

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed

Providing glass panes 3.50 mm thick ) clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured)

Providing and applying white cement based wall putty of avg.2mm of approved brand and manifuture

Distempering with 1st quality acrylic distemper (ready made) of approved manufacturers and of required shade and color complete. Two or more coats on new work including cement primer coat over wall putty surface.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood)

Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work

Reiforcement for R.C.C work including straightening, cutting, bending, placing in position & binding with binding wire all complete, Thermo Mechanically Treated Bars (500 D) (All work at all levels complete).

Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete i/c soffits / eaves board

Providing colour coated Hi rib G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50 mm thick ) incld. all carriages.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coatedthickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Providing and Fixing of Hardware Items

L Drop

Towerbolts 150 mm

Towerbolts 100 mm

Hooks

Handles 150 mm

Handles 100 mm

Making plinth protection50 mm thick of cement concrete 1:3:6 with 20 mm nominal size aggrigates over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated & grouted with the fine sand i/c finishing the top smooth

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved brand make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580x440 mm.

Providing and fixing Polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license(1000 litre

Providing and fixing of Stain less steel heavy duty Bib cock

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

P/F of following PVC pipes & fittings of standard quality & make (B type) of standard brand incl. jointing/testing complete

100mm Dia

75mm Dia

Door Junction (100mm x100mmx75mm )

Door Bend

P- Trap

Floor Trap (100mm)

collar 100mm with rubber washer

collar 75mm with rubber washer

Plain Bend 100mm

Plain Bend 75mm

Tee 100mm

Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work for letter writtingwith english/urdu alphabhets f school name /dise code alomg with proper adress with Samagra Logo etc ) as per requirment / approved as per the directions of the engineer incharge complete.

Providing /fixing 25 mm dia pvc condute pipes,junctions etc for electric fittings includng embedding all complete job

Carriage of materails By Mech.Transport, from source to site of work

Stone Aggregate for an average lead of 15 Km

Sand for an average lead of 15 Km

Bricks for an average lead of 10 Km