REPAIRS TO SEWAGE LINES, MANHOLE, MANHOLE COVERS, DESLUDGING OF SEPTIC TANKS AND SOAKAGE WELL IN TECH AREA AT AIR FORCE STN PHALODI

Amount

M&L for cleaning and desilting of sewage lines 100mm dia of any size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MOD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed.

All as per item No 1.00(here-in-before) but sewage lines exc 150mm dia.

M&L for cleaning and desilting of manholes depth not exceeding 1.50 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge & other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning and desilting of manholes depth exceeding 1.50 metre but not exceeding 3.00 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning the chocked/blocked in AC/CI/PVC soil waste pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors complete all as specified and directed.

M&L for Cleaning of septic tank/soakage well of any size & capacity by removing solid or semi solid sludge by mechanically or manually including removal of sludge in covered vehicle to a distance exc 500m but n.exc2000 m & buried in excavated pit of adequate size including excavation and covering with earth complete all as specified and directed. Note-measurement will be taken only after de-watering of tanks.

Dewatering of septic tank/soakage well /manholes of any size, depth and capacity by manually or mechanically & removing water into nearby drain complete all as specified & directed.

Demolition and breaking up drain pipes of 100mm bore (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes of bore 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes of bore 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m depth or n. exc 10 Sqm on plan and n exc 1.5 m in depth for foundations, laying pipes/ cables etc or for shafts,wells,cesspits, manholes,pier holes etc. in soft/loose soil & getting out complete all as specified and directed

Excavating in trenches, n. exc 1.50m wide and exc 1.50m but n.exc 3.00m in depth for foundations, laying pipes/ cables etc or for shafts,wells,cesspits, manholes,pier holes etc. in soft/loose soil & getting out complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.50m above the starting point complete all as specified and directed.

M&L for 100 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 150 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for 200 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 100 mm bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 150 mm bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished, and reforming benching as required 200 mm bore complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level) of any description not other specifically provided for etc and removal of rocks/debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Demolition of Precast concrete articles /Precast concrete block masonry built in cement mortar of any type complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in block masonry with solid blocks, exc. 10 cm in width and setting in Cement mortar (1:6) complete all as specified and directed.

M&L for Cement concrete 100 mm thick type D2 (1:4:8) using 40 mm graded aggregate and finishing the concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stopped end etc. complete all as specified and directed.

M&L for Precast Cement Concrete (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description and of any thickness on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar (1:4) with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall measured and paid sepretaly.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Running welding thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed.

M&L for Running welding thickness of metal to be welded not exc 6mm complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, etc. complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade including 25mm thick sand cushioning complete all as specified and directed.

All as per item No 42.00(here-in-before) but except tile.

M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided and removal of debris to a distance not exc 100m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. Note :Reinforcement cut as required to facilitate demolition.

M&L for Reinforced cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT bars 6 to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed.

M&L for cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays including taking down old pipe complete all as specified and directed

S&F in replacement 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed.

S&F in repplacement 100 mm bore CI bends (any radius) diminishing pieces or tapers complete all as specified and directed.

M&L for preparation of new steel surfaces of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F in repairs 200mm bore PVC (SWR) pipes single socketed in any length with solvent joints fixed to walls with and including MS stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays, finishing the mouth of pipe leakproof with CM (1:2) complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall with and including MS stack clamps out of 50x5 mm flat iron in the interval of 1.50m and 16mm dia round iron stays, including bolts and nuts and securing ends of stays, finishing the mouth of pipe leakproof with CM (1:2) complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 110 mm dia with access door complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

M/S SOLANKI GENERAL SUPPLIERS