Doubling of track between MAJN-PNMB section- Construction of new 11kV/433V package substation including switch room building and signal office at Mangalore Railway station.

Supply and fixing of Brass cable glands / termination for sizes up to and including 50 sqmm.

Supply and fixing of Brass cable glands / termination for sizes above 50 sqmm and including 185 sqmm.

Supply and fixing of Brass cable glands / termination for sizes above 185 sqmm and including 400 sqmm.

Supply and provision of Mass concrete with 1:2:4 ratio

Supply and provision of Mass concrete with 1:3:6 ratio

Excavation of trench in all kinds of soil including refilling.

Excavation of Cable trench across the concrete flooring / road / track.

Supply and spreading of blue metal (Ballast) of 40mm size

Removing of Exg. Lights/fans& fittings of all sorts with all accessories and wiring and handing over to Railways

Erection of cut rail post of up to and including 6 feet height.

Removal of existing lamp posts /rail posts by cutting

Cutting and removal of existing OH span with/ without guarding but with cross arms and allied items .

Supply and fixing of PVC rigid wiring conduit of 20 mm dia and 2 mm thick, by open wiring method.

Supply and fixing of PVC rigid wiring conduit of 25 mm dia and 2 mm thick, by open wiring method.

Supply and fixing of PVC rigid wiring conduit of 20 mm dia and 2 mm thick, by concealed wiring method.

Supply and fixing of PVC rigid wiring conduit of 25 mm dia and 2 mm thick, by concealed wiring method.

Fabrication, supply and fixing of pipe brackets for fixing of light fittings on posts / walls of buildings etc.

Supply and fixing of 'B' class GI pipes for cable leading / protection.- 150 mm Diameter

Supply and fixing of Cable Route Indicator, Cast Iron plate type.

Supply, erection and testing of L.T. Earthing arrangements using GI pipe.

Supply and fixing of trilingual Danger Board.

Supply, erection and testing of earthing arrangements using copper plate.

Fabrication supply and erection stand for fire buckets including supply of 6 numbers of fire buckets

Supply, erection and testing of earthing arrangements using Cast Iron pipe.

Supply and spreading of chequered electrical rubber mat of 2 m long and 1.0 m wide and 12 mm thick.

Supply and drawing of schematic drawing and instructions on the walls.

Supply & Preparation of schematic, completion , as erected drawing for all works covered in the schedule

5-Non-ESOR Items

Supply and laying of 6 SWG GI Wire

Supply and laying of 50 mm dia. PN-4, PE 63 grade HDPE pipe

Supply and laying of 75 mm dia. PN-4, PE 63 grade HDPE pipe

Supply and laying of 110 mm dia. PN-4, PE 63 grade HDPE pipe

Leading to site and laying of 160 mm dia. PN-4, PE 63 grade HDPE pipe in cable trench.

Supply of 160 mm dia. PN-4, PE 63 grade HDPE pipe as per specification.

Excavation of existing cable trench by manual to trace out the cable already laid.

Supply erection testing and commissioning of tiltable pole, 6m height with 2 nos of 50W flood light fittings and their fixing hardware including foundation as shown in the drawing.

Supply and fixing of 16A fuse unit 20A SMC connector 5mm thick SMC sheet inside OCT pole

Wiring of octogonal pole with 3 core 1.5 sq mm wire

Supply and fixing of 1200mm sweep BLDC fan with electronic step regulator in ceiling

Supply and erection of 3600 l m or above street light fitting 35W (+/-2 W) as per specification

Supply, Installation, Testing and Commissioning of 36 to 40W LED TUBELIGHT (NOTE- 70% payment only will be released after erection. Balance 30% will be released @ 5% per annum, till completion of the five year warrantee period)

Supply and Conceiling of modular type 1.6mm thick GI sheet metal box without mounting plate and cover plate - 2 module

Supply and Concealing of modular type 1.6 mm thick GI sheet metal box without mounting plate and cover plate - 3 module

Supply and Concealing of modular type 1.6 mm GI sheet metal box without mounting plate and cover plate - 4 module

Supply and Concealing of modular type 1.6mm thick GI sheet metal box without mounting plate and cover plate - 6 module

Supply and Concealing of modular type 1.6 mm thick GI sheet metal box without mounting plate and cover plate - 8 module

Supply and Concealing of modular type 1.6 mm thick GI sheet metal box without mounting plate and cover plate - 12 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -2 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -3 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -4 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -6 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -8 module

Supply and Fixing of modular type mounting plate and cover plate similar to Legrand myrius model 679702, or similar as given in specification for switch boxes already concealed. -12 module

Supply and fixing of modular type switch 6A

Supply and fixing of modular type plug socket 6A as per specification

Supply and fixing of modular type switch 16A as per specification.

Supply and fixing of modular type plug socket 16A as per specification.

Supply and fixing 3 plate ceiling roses as per specification.

Supply and fixing of 225mm sweep Exhaust fan

Supply and fixing of Angle batten Holder with 11W LED Lamp

Supply and wiring including termination of wiring with 1 runs of 16 sq mm PVC insulated copper cable

Supply and wiring including termination of wiring with 1 runs of 10 sq mm PVC insulated copper cable

Supply and and fixing of lighting control timer with contactor.

Casting of M-15 RCC foundation with 8mm steel rods reinforcement

Supply and wiring with three numbers of 1.5 sq mm PVC insulated copper wire.

Supply and wiring with 3 numbers of 2.5 sq mm PVC insulated copper wire.

Supply and wiring with Two numbers of 4 sq. mm and one number of 2.5 sq mm PVC insulated copper wire

Supply and wiring with four numbers of 4 sq. mm and one number of 2.5 sq mm PVC insulated copper wire.

Transportation of Material

Supplying of reinforcement for RCC work including straightening , Cutting, Bending, placing in position and binding all complete.

Supply erection testing and commissioning of out door type metering panel 074 consisting of 630A load break switch, HT HRC Fuse, Seal of bushings, 3 Numbers of CT 10/5A, 11kv/110V PT and 0.2 accuracy class TOD meter as per specification(Make Uni power, Resi tech or similar).

Supply erection testing and commissioning of SF-6 insulated motorised Ring Main Unit consisting of 2 numbers of load break switch/isolator and one circuit breaker, extensible type as per specification. (ABB, SEMENS, L&T or SCHENIDER make only). 2068025.0

Supply erection testing and commissioning of SF-6 insulated motorised Ring Main Unit consisting of 1 numbers of load break switch/isolator and 4 circuit breaker, extensible type as per specification. (ABB, SEMENS, L&T or SCHENIDER make only). 1314544.0

Supply erection testing and commissioning of SF-6 insulated motorised Ring Main Unit consisting of 2 numbers of load break switch/isolator and 2 circuit breaker, extensible type as per specification. (ABB, SEMENS, L&T or SCHENIDER make only). 2645885.0

Supply, erection, testing and commissioning of indoor type 400 kVA, 11 kV/433 V, 3- phase, 50 Hz, Dyn11 vector group, oil immersed, ONAN cooled, fully hermetically sealed distribution transformer

Supply fixing testing and commissioning of APFC panel 200 KVAR as per specification. (Make:- ABB, SEMENS, L&T, shreem, Keltron, Magnewin, or SCHENIDER make only). 1889298.0

Fabrication, Supply , and stacking of 800A Main distribution panel board equipped with draw out type 2 nos of ACB and MCCB etc. as per specification.

Fabrication Supply , and stacking of 250A Main distribution panel board equipped with all switchgears etc as per specification.

Supply of 11kV 95 sq mm 3 core E grade XLPE insulated armoured UG cable

Laying of 11kV, 3 core, 95 sq mm XLPE insulated armoured, UG Cable as per specification.

Supply and fixing of Outdoor type cable end termination for 95 sq mm or above grade 3 core HT UG cable

Supply and fixing of Indoor type cable end termination for 95 sq mm or above E grade 3 core HT UG cable

Casting of 0.15m thick having depth of 0.5m and 0.5m wide RCC cable trench with RCC cover

Supply and concealing of Single phase double door 8 way MCB DB with 40A DP isolator, 25A 30mA RCCB and one DP MCB and 3 numbers of 6 to 16A MCBs

Supply transportation and stacking of 4 core 185 sqmm XLPE insulated PVC sheathed, armoured LTUG Cable.

Supply transportation and stacking of 4 core240 sqmm XLPE insulated PVC sheathed, armoured LTUG Cable

Releasing or Laying or re-laying of LT UG Cable 16 to 25sq mm

Releasing or Laying or re-laying of LT UG Cable 35 to 70 sq mm

Releasing or Laying or re-laying of LT UG Cable 150 to 185sq mm

Releasing / relaying / laying of HT cable / LT cable above 185 sq mm

Supply and fixing of 300 mm vide 75mm deep, 2mm thick cable tray in PF/ FOB shelter/wall

Providing and fixing 40 mm X 6 mm copper strip from earth electrode and other copper sections including connections etc. as required.

Supply and laying of one number PVC insulated and PVC sheathed / XLPE control cable of 1.1 KV grade of 4 x 2.5 sqmm armoured copper conductor cable in the existing masonry open duct/ HDPE pipe as required.

Extra for drilling and boaring of earth pit up to 3mtr depth and 250mm dia in hard soil/ rock for erecting earth electrodes

Supplying and fixing 8W TPN DD DB, horizontal type three pole and neutral, sheet 098 steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing with 63A 4P MCB and 63A 100mA RCCB as incomer, 8nos 6-32A SP MCB and 4 nos 40A SP MCB as outgoing.

Fabrication supply and fixing of 8SWG Chain link panel welded in frame work (excluding frame )

Fabrication supply and fixing of steel frame work for fixing chain link panel (excluding Chain link panel )and other steel work such as cable trench cover chequered sheet, frame work etc.

Supply and fixing of 16A DP MCB in Steel Enclosure similar to L&T model no. DEENC002SD

Supply and fixing / provision for safety accessories such as ABC and CO2 fire extinguisher two numbers each, first aid box, Shock treatment chart, hand gloves and artificial Resuscitator

Supply and fixing of straight through Joint Kit for 1.1 KV 3.5/4 core LTUG cables of sizes from 70 sq.mm to 150 sq.mm

Supply and fixing of straight through Joint Kit for 1.1 KV 3.5/4 core LTUG cables of sizes from 185sq.mm to 300 sq.mm

Supply and fixing of spreader links of a set of four numbers.

Fabrication, supply, transportation and stacking of fabricated steel angles, pipes, channels flats etc. for making PSC /A pole as 2 pole / 4 pole structure, cross arms , supporting structures, etc, and for angle/flat for ladder type cable tray and all other steel requirements.

Supply and erection of 1.5 TR inverter type 5 star rated split type AC plant

Supply fixing and wiring of 25A motor starter switch for AC

Supply and fixing of 10 liters Geyser as per enclosed specification including wiring Square

Supply and fixing of LED type trilingual station name board as per specification

Charges for liaison work with MESCOM and Karnataka EIG for preparing and submission of EIG application and obtaining EIG approval including arranging the Inspection of MESCOM a EIG officials and remittance of all FEE whereever required.

Supply of table and chair set for substation building

Supply transportation and stacking of 4 core 16 sqmm XLPE insulated PVC sheathed, armoured LTUG Cable

Supply transportation and stacking of 4 core 50 sqmm XLPE insulated PVC sheathed, armoured LTUG Cable

Drilling of cable duct under Railway Track by Horizontal drilling method

Form work for Centring shuttering including strutting proping etc. and removal of form for foundation, footings, bases of columns etc.

Form work for Centring shuttering including strutting proping etc. and removal of form for Walls including attached plastres etc. etc.

Form work Centring shuttering including strutting proping etc. and removal of form for Suspended floors roofs landings etc.

Form work for Centring shuttering including strutting proping etc. and removal of form for Lintles beams, plinth beams etc.

Brick work with machine moulded perforated non modular bricks of class designation 12.5 conforming to IS:2222-1991 in superstructure from beyond plinth level up to 6m above plinth level in cement mortar 1:6

12mm Thick plastering with 1:6 ratio cement mortar

Steel work in build up tubular trusses including cutting hoisting, fixing, fixing in position and applying a priming coat approved steel primer, and two coats of enamel paint, welded and bolted including special shaped washers etc. Complete Hot finished welded type tubes

Supply and installation of pre-coated galvanised iron profile sheets as per specification

Applying one coat of cement primer of approved brand and manufacture on wall surface

Finishing walls with Premium acrilic smooth exterior paint with silicon aditives of required shade

Finishing walls with Premium acrilic smooth interior paint with silicon aditives of required shade

Demolition of stone rubble Demolision of stone rubble masonry made in cement mortar made in cement mortar

Supply, transportation un loading and STACKING of 160mm dia PN-10, PE 63 /80/100 grade HDPE pipe

Leading to site and laying of 160mm dia PN-10, PE 63 /80/100 grade HDPE pipe

Leading to site and erection/fixing of fabricated steel flats, angles and channels including fabrication and fixing of clamps/fasteners and for cross arms and as required at site.

Galvanization of small steel sections including cross arms, angles, brackets, channel, flats etc.

Supply ,erection , testing and commissioning of 2KVA online type UPS having single phase input and single phase output , IGBT technology and with inbuilt isolation transformer along with tubular battery for 60 minutes backup with metal battery racks including its wiring.

Erection, testing and commissioning of 800A Main Distribution panel board equipped with all switch gears as per specification

Erection, testing and commissioning of 250A Main Distribution panel board equipped with all switch gears as per specification

6-Section RE works