Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.6 L+₹45,250 (7.34%)Rejected-AOC TC 25 2201 NNRA 97 NALANDA LANE KOWDIAR NANTHENCODE KOWDIAR P O 695003 | THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695003 | L2 | Rejected-AOC L2 | |
| 3 | L3₹6.7 L+₹51,200 (8.31%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹7.0 L
EMD Value
₹10,500
Closing Date
28 Oct 2021, 3:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer PWD Electronics Rural Sub Division Tvpm
Supply and Installation of Wireless LAN at various sections at Collectorate, Kollam
2021_PWD_446815_1
72/AEE/ELSRURAL/2021-22
Open Tender
Miscellaneous Works
Item Wise
30 days
Kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,817
₹10,500
25 Nov 2021
21 Oct 2021
30 Oct 2021
21 Oct 2021
28 Oct 2021
21 Oct 2021
21 Oct 2021 - 28 Oct 2021
Amount
Supply, Installation and Testing of Access Point with 2.4 GHz (575Mbps max rate) with 2x2 MIMO and 5-GHz (4.8Gbps max rate) radios with 4x4 MIMO, 4 integrated Omni directional down Tilt Antennas. AP type : indoor, dual radio, 5GHz 802.11ax 4x4 MIMO and 2.4GHz 802.11ax 2x2 MIMO, Support for up to 256 associated client devices per radio and up to 16 BSSIDs per radio, Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM), - 802.11ax: Orthogonal frequency-division multiple access, Transmit power: Configurable in increments of 0.5 dBm, RJ-45 port with maximum speed 2.5Gbps, USB 2.0 host interface, Power : Direct DC source: 12 Vdc nominal, +/- 5% or Power over Ethernet (PoE), Suitable mounting bracket /kits for keeping the Access point and including all the other connecting accessories. Three year warranty etc. Preferred Make : HP- ARUBA, CISCO or equivalent.
Supply, Installation, Testing and Commissioning of Dual band PCI EXPRESS wireless Network Interface Card with following specification:- Wi-Fi speeds (867 Mbps on 5 GHz band and 300 Mpbs on 2.4 GHz band), 2×2 MIMO, Wireless standards:-IEEE 802.11ac/n/a @5Ghz IEEE 802.11n/g/b @2.4 Ghz, Wireless Security: supports Support 64/128 bit WEP, WPA/WAP2, WPA-PSK/WPA2-PSK, 802.1x Preferred Make: TP Link, D-Link or equivalent. Three year warranty
Supply and Installation of 28 port L2 manageble PoE + Switch having minimum 24 port 10/100/1000 Base T with 4 Giga SFP ports dedicated PoE power delivery capacity ≥195W, switching capacity ≥ 45Gbps, minimum CPU memory 512MB, Flash Memory 256 MB. Approved Make: - Cisco, Juniper, Netgear, HP, Allied Telesis
Supply and Installation of Layer 2 manageable 16 port Ethernet Switch which having 14 x 10/100/1000 Mbps ethernet ports + 2 x Gigabit SFP ports, web manageable supporting ipv6 256 MB flash memory, switching capacity ≥ 45Gbps, Rack mountable. Approved Make: - Cisco, Juniper, Netgear, HP, Allied Telesis
Supply and fixing CAT-6, 24 Port Enhanced Modular type Fully loaded Patch Panel with mounting plates, for interconnecting servers and clients, including termination charges. Preferred Make:Molex, Actassi, R&M. or equivalent.
Supply and fixing of CAT6 Information Outlet for 1000 Mbps with spring shutter Faceplate + SMB+ I/O including termination. Preferred Make: Actassi, Belden, R&M, Molex or equivalent.
Supply and Installation of CAT 6, 3 meter Patch cord. Preferred Make:Actassi, Belden, R&M, Molex or equivalent.
Supply and Installation of CAT 6, 1 meter Patch cord. Preferred Make:Actassi, Belden, R&M, Molex or equivalent.
Supply, laying, certification and documentation of CAT-6 UTP cable 23 AWG through the existing conduit /cassing and capping as required. Preferred make: Actassi, Belden, R&M, Molex or equivalent.
Supply and fixing of 20 mm medium gauge Ivory colour PVC conduits with specials confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required. Preferred Make: Balco/Prime or equivalent
Supply and fixing >50mm x 50mm PVC cable management System within base lid along with the following accessories confirming to IEC 610 34/BS 476 &4678 on surface/recess including making good the damages in case of recessed installation as required. Accessories including External Angle 90, Flat Angle 90/TEE,internal Angle 90, Internal coupler, Flat cross,End cap, Flanged coupler, Joint cover, cable retainer, Wall plate for internal Angle etc. Preferred Make: R&M, OBO or equivalent
Supply and fixing of 25 mm medium gauge Ivory colour PVC conduits with specials confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage colour washing etc as required. Preferred make: Balco/Prime or equivalent
Supply and fixing of 19" 6U wall mount rack for switches with cable manager, PDU and hardware mounting kit. Preferred make: Valrack, Netrack, HCL or equivalent.
Supply and Installation of ISO Certified 1 KVA or higher Line Interactive Sine Wave UPS having minimum 30 minuits Backup on Full Load. Warranty: 2 year on site. Preferred make: V-Guard, Hykon or equivalent
Charges for Testing, commissioning, Documentations and making permanent labeling at the I/O box and on the patch panel, charges for the Tile cutting & required electrification including labour charge, making Good the damages etc.
ELIGHT COMPLETE NETWORKING SOLUTIONS
a dot computers
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .