Repair and renovation and alteration work with APP Roof treatment of C-10/1 Quarter at Baruipur SDH and SSH, Baruipur in the District of South 24 Parganas.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. G.Floor

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m a) In ground floor including roof. (a) upto 150 mm. Thick G. floor

Dismantling R.C floor, roof beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m including stacking of steel bars. a) In ground floor including roof.

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge b) Extra for additional 3.6 height or part thereof

Stripping off worn.out plaster and raking out joints of walls, ceiling etc. Upto any height and in floor including removing rubbish within a lead of 75 mm as directed

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Brick work with I st class bricks in cement morter (1:6) (b) In super structure, ground floor

125 mm thick brick work with ist class bricks in cement morter(1:4) ground floor

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Ground floor

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (f) 25 mm to 30 mm shuttering as per decission & direction of Engineer-In-Charge. Ground floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge-black annealed wire at every intersection, complete as per drawing and direction. Other than SAIL/TATA/RINL/JSPL/JSW/SHYAM/SRMB Ground floor

(Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will bepaid separately) a) Upto area 2.5 Sq.m

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above Ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (i) With 1:6 cement mortar (b) 20 mm. thick plaster

15 mm thick

ii) with 1:4 cement morter 10 mm thick

Supplying, fitting and fixing 1st quality ceramic tiles in walls & floors to match with the existing work, s & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the, colour of tile including roughning of concrete surface, if necessary or by synthetic adhesive & grout matirials etc. (A) Floor with sand cement morter (1:4) 20 mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m. & joint filling using white cement slury @ 0.20 kg/Sq.m. (b)Area of each tile above 0.09 Sq.m. Other than Colour decorative including white

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local.

Panel shutter of dor and window , as per design (each panel consisting of single plank without joint) , including fitting and fixing the same in position but excluding the cost of hinge and other fittings iii) 35 mm thick shutter with 19 mm thick panel of size 30 to 45 cm (b) Sishu, Gamar , Champ . Badam, Bhola, morga ,hallack

Supplying ,fitting and fixing M.S clamp for door and window frame made at flat bent bar ,end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction (cost of concrete will be paid separetly) (b)40 mm x 6 mm,200 mm length

Anodised Aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S specification (I.S 230/72) fitted and fixed complete. ((iii)100 mm x 63 x 3.2 mm

Anodised Aluminium D type handel of approved quality manufactured from extruded section conforming to I.S specification (I.S 230/72) fitted and fixed complete. (iii)100 mm grip x 12 mm dia rod

Anodised aluminium barrel /tower /socket bolt (full coverd ) of approved manufactureed from extruded section conforming to I.S 204/74 fitted and fixed with cadium plated screws:- vii) 225 mm long x 10 mm dia bolt

Supplying fitting & fixing of 2 track / 3 track Aluminium sliding Window of all aluminium section viz. window frame (to, bottom & side frame) shutter (top, bottom, side & interlock member ) made of aluminium alloy extrussion conforming to is 733-1983 & 1285-1975, anodised conforming to IS 1868-1983 fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screw etc.including labour chargees for fitting and fixing of aluminium 2track/ 3track sliding window with fixing of glass (excluding cost of glass)all complete as per architectural drawing and direction of Engineer in charge. 1o-12 Micron thickness Anodizing film Natural white For 2 Track window 1 st.Floor

Supplying buble free float glass of approved make and brand conformining to i.s 2835-1987 ii) 5 mm thick colour /tinted/smoke glass

Applying extrrior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to received decorative texture (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and prepairing the surface throughly complete as per manufactures specification and as per direction of the EIC. (a)One coat Ground floor

Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufavture's specification and as per direction of E.I.C to be applied over acrylic primer as requried. The rate includes cost of materials. Labour, scaffolding and all incidental charges but excluding the cost of primer a) Normal Acrylic Emulsion (Two coats) G. floor

(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as permanufacturer's specification and as[per direction of the Engg-in-charge. (In Ground floor)

Applying Acrylic Emuision paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) (Two coats) i)Standard Quality

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. G floor

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

(a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Supplying, fitting and fixing CPVC(Chlorinated Polyvinyl Chloride) pipes of approved make conforming to I S - 15778 : 2007 with all necesssary accessories, specials viz socket, reducing socket, bend tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short pice etc. fitted with holder bats clamps, including cutting pipes, making thredes, fitting, fixing etc.complete in all respect including cost of all necessary fittings as requred, joininting materials in any position above ground . (A) For Exposed Work (a) (ii) 15 mm

(b) 20 mm dia

(b) 25mm dia

Supplying and fitting and fixing gunmetal wheel valve of approoved brand and maketested to 21 kg per Sq.cm.(for water line only)) vii) 20 mm dia

vii) 25 mm dia

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) Multilayer. (b) 1500 litre 2 nd floor

Labour for hosting plastic water storage tank i) Upto 1500 litre capacity

Supplying, fitting and fixing Wash basin vitreous china best quality approved make wash basin with C.I brackets on 75 mm X 75 mm wooden blocks CP waste fittings of 32 mm dia, one approved quality brass C.P piller cock of 15 mm dia , C.P chain with rubber plug of 30 mm dia , approved quality P.V.C waste pipe withC.P nuts 32 mm dia, 900 mm long approved quality P.V.C connection pipe with heavy brass C.P nut including mending good damages and painting the brackets with two coats of approved paintsand C.i brackets including two coats of painting of C.I brackets. ii) 550mm x 400 mm

Supply of UPVC pipes (B-Type) & fittings conforming to I.S- 13592 -1992 (ii) Double socketed 3 metre length (a)75 mm

B) Fittings (ii) Plain tee (b) 110 mm

(iii) Door Tee (b) 110 mm

(ii)Door bend (T.S) (b) 110 mm

Supplying , fitting and fixing Waste fittings complete. a) C.P over brass iii) 40 mm

Cleaning silt of inspection pit

Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)