COMPLETION OF INCOMPLETE WORK OF PROVISION OF ACCN FOR ADDITIONAL TRAINEES IN TRAINING CENTRE FOR ACCRETIONS AT BEG AND CENTRE ROORKEE

Amount

SCHEDULE 'A' PART-I (BUILDING WORK- TO BE QUOTED BY THE CONTRACTOR)

Completion of incomplete work of Construction of block of single living accn for 70 ORs (Triple Storey) complete all as specified, directed and shown on drawings (Group II)

SCHEDULE 'A' PART-II (INTERNAL WATER SUPPLY PREPRICED BY MES)

Total amount of Schedule 'A' Part II (INTERNAL WATER SUPPLY) upply) (For details see Schedule 'A' Part-II in tender documents)

SCHEDULE 'A' PART-III (INTERNAL ELECTRIFICATION - PREPRICED BY MES)

Total amount of Schedule 'A' Part III (INTERNAL ELECTRIFICATION) (For details see Schedule 'A' Part-III in tender documents)

SCHEDULE 'A' PART-IV (SITE CLEARANCE- PREPRICED BY MES)

Total amount of Schedule 'A' Part IV (SITE CLEARANCE) (For details see Schedule 'A' Part-IV in tender documents)

SCHEDULE 'A' PART-V (PATH- NIL)

SCHEDULE 'A' PART-VI (SEWAGE DISPOSAL - PREPRICED BY MES)

Total amount of Schedule 'A' Part VI (SEWAGE DISPOSAL) (For details see Schedule 'A' Part-VI in tender documents)

SCHEDULE 'A' PART-VII (AREA DRAINAGE - PREPRICED BY MES)

Total amount of Schedule 'A' Part VII (AREA DRAINAGE) (For details see Schedule 'A' Part-VII in tender documents)

SCHEDULE 'A' PART-VIII (EXTERANL WATER SUPPLY- PREPRICED BY MES)

Total amount of Schedule 'A' Part VIII (EXTERNAL WATER SUPPLY) (For details see Schedule 'A' Part-VIII in tender documents)

SCHEDULE 'A' PART-IX (EXTERNAL ELECTRIFICATION - PREPRICED BY MES)

Total amount of Schedule 'A' Part IX (EXTERNAL ELECTRIFICATION) (For details see Schedule 'A' Part-IX in tender documents)

SCHEDULE 'A' PART-X ( REFERIGERATION - PREPRICED BY MES)

Total amount of Schedule 'A' Part X (REFRIGERATION) (For details see Schedule 'A' Part-X in tender documents)

SCHEDULE 'A' PART-XI (SOLAR WATER HEATING - PREPRICED BY MES)

Total amount of Schedule 'A' Part X (SOLAR WATER HEATING) (For details see Schedule 'A' Part-X in tender documents)

SCHEDULE 'A' PART-XII (MISCELLANEOUS ITEMS - TO BE QUOTED BY CONTRACTOR)

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated usheathed copper conductor cable FRLS in and including rigid non metallic PVC concealed conduit 20 mm dica for higher medium grade ISI marked complete with all PVC conduit accessories/fittings and sunk pressed (1.2 mm thick) steel terminal swithc boxes thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 1.5 Sq mm coper boxes and common earth, earht dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- (a) One light/fan/exhaust fan/ne;;/buzzer pont controlled by one, one way switches 5/6 Amps

(b) One 3 Pin 5/6 amps Socket out let point on independent board, controlled by one, one way 5/6 Amps

(c) One 3 Pin 5/6 Amps socket out let point CN some board controlled by one, one way 5/6 Amps

M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated usheathed copper conductor cable FR in and including rigid non metallic PVC concealed conduit 20 mm dica for higher medium grade ISI marked complete with all PVC conduit accessories/fittings and sunk pressed CI/pressured Steel terminal switch/socket boxes wtih 3 mm thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 1.5 Sq mm coper conductor cable (FRLS) connectd to common earth and connecting to earht dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all accessories for one three pin 15/16 Amps, socket out let point on independent board complete all as specified and directed.

S&F Propeller type AC ventilating fans 230 Volts, 300 mm sweep (Esxhaust Fan) PVC body with louver shutter complete including grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/00076 copper cable, rubber insulated from ceilling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

S&F Ceiling fans of 1200 mm sweep including all accessoreis such as down ron, canopy, blade sest comprising of three blades, hanging arrangement with rubber block, nuts, bolts, washers, split pins, capacitor etc complete with and including PVC insulated twisted twin core 23/0.0076 copper conductor flexible rubber insulated cable of required length from connector/ceiling rose to fan motor including testing, comissioning and painting with black synthetic enamelled paints MES number upto 2.5cm high, complete all as specified and directed

S&F fan Hook, made out of MS flat 50 x 6 mm size, complete with nuts, bolts, washer etc, complete all as specified and directed

S&F 12 watt LED Lamp, 240 Volts AC, single phase, retrofit type, minimum 90lumens per watt. Complete all as specified and directed.

S&F flush type electronic fan regulator 230 Volts, rotory five step, humming free, 120 watts, complete all as specified and directed

S&F LED light fiting 1 x 20 watt, T-8 extruded batten complete with retro fit T-8 LED rod polycarbonae fiting, complete with all accessories, internally prered and including connecting to ceilling rose with three core multistranded copper cabel of suitable size, complete all as specified and directed. (Make C&S cat part No LTDC30120WLED or Havells cat Part No LHEWEBP7PL6SS025or equivalent in Syska/Cromplton Greaves)

S&F LED bed ligt fiting, complete with all accessoreis, internally bewired and including connecting to ceilling rose with three core multistranded coppper cable of suitable size with and including one No LED Lamp of 7 watt, completeall as specified and directed.

S&F security light fiting versatile pressure die cast aluminium with high power LED 25 Watt as light source completee with LED 25 W 5000K including bracket made out of GI pipe Light Grade pipe bent ot shape including 02 Nos MS flat clamps with nuts, bolts & washers and connecting with 3 core suitable size copper conductor wire, complete all as specified and directed. (Make-Havells cat Part No LHEWEBPTPL6SS025 or C&S cat Part No LTESS125WLED or equivalent in Syska/Crompton Greaves)

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed, coppper conductor cable of size 4.00 Sqmm LT, 1100 Volts grade, drawn through and including 20 mm dia (Medium grade PVC non metalice concealed conduit with accessories such as socket, elbow junction box, bell mouth, reducer, bend and flexible conduit etc. and fitings and one run of 4 sqmm single core multistranded copper conductor with suitable lungs made of copper cable greeen colour as earth continuity conductor. Notes for submain wiring:-(i) Two runs of able one run of earth wire and one run of PVC non metalic conduit of 20 mm dia shall be measured as on run length. (ii) Cable required for connection to DBs shall deemed to be included and shall not be measured separetly. (iii) Earth wire shall run inside the PVC conduit complete all as specified and directed.

Ditto but 6 sqmm two core cable with 6 sqmm earth continuity conductor, complete all as specified and directed.

M &L for Distribution board (DB) made out of sheet metal enclosure (CRCA Sheet)IP-43, dust and vermin proof SPN 12 way with 200 Ampss rated copper bus bar double door protection neutral bar, earth bar, single pole and neutral 240 Volts, Double Door, flush to wall complete all as specified and directed.

M&L for distribution board (DB) made out of sheet metal enclosure (CRCA Sheet) IP-43, dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar double door protection neutral bar, earth bar, single pole and neutral 240 Volts, Double door, flush to wall complete all as specified and as directed.

M&L for distribution board (DB) made out of sheet metal enclosure (CRCA Sheet) IP-43, dust and vermin proof TPN 4 way with 200 Amps rated copper bus bar double door protection neutral bar, earth bar, single pole and neutral 240 Volts, Double door, flush to wall complete all as specified and as directed.

S&F minature circuit breaker with thermal overload as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terninals having heat resistant moulding, single pole,240 Volts and 6-32 Amps current rating, 'C' series, 10 KA complete all as specified and directed.

S&F minature circuit breaker with thermal overload as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terninals having heat resistant moulding, single pole,240 Volts and 6-32 Amps current rating, 'C' series, 10 KA complete all as specified and directed.

S&F Isolator double pole, 240 V, 40 Amps curent rating capacity, C series robust design and terminals having heat restant moulding, including suitable size copper lugs, complete all as specified and directed.

Earthing complete with galavanised mild steel earth plate (electrode) 600x 600 x 6.3 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below ground level sorrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 CM all round the plate using 4 mm dia GI wire as earth wire moulded and riveted to earth plate at one end and connected to main switch/ control switch of the building at anothe end, GI earth wire incased in and includign 15 mm dia GI 'Light gradel as water pipe from earth chamber to upper edge of earth plate, CI funnel wtih wire mesh fixed on water pipe and PCC 1:2:4 type B-1 duly reinforced wtih 10 mm dia MS bar in lifting handle, excavation, earth work including laying the GI pipe concealed in floor/wall all as decribed in electrical plate No 5 of SSR Part I

Supply fixing and jointing 40 mm bore galvanised iron water tubes light grade with and including all GI fittings such as flanges, unions, reducer sockets socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to poles/wals or laid under roads/drains/nallah/floor etc including flat iron clamps, nuts, bolts and washers etc complete all as specified and directed

M&L House service brakcet (Hook type complete with 3.0 m long GI Pioe 40 mm dia Med Grade, two nos 90 degree bends M.S. hook and stay or gy, complete all as specified and directed.

Supply Installaing testing and commissioning voltage stablizer for automatic operation single phase naturallly air cooled, indoor type and designed for input voltage of 170-250 volts with out put voltage stablized at 230 volt with accuracy of +/-2.5% capacity 3.0 KVA, complete all as specified and directed.

Supplying Installation testing and commissioning of soalr water heating system with plate collector, based on indirect transfer of heat, capacity 200 LPD complete with solar panel with copper tubes along with inslulated not water sotrage tank double body, system shall have electrical heating backup upto 3.0 KV with necessary safety control, thermostat, hot water temp gauge, water circulating pumps, instrumentation (cold water inlet, hot water outlet, hot water tank, water flow meter, control and control panels, instruction manual etc, complete in all respect including material (glass wool) duly binded with chicken wire mesh and covered wtih aluminium sheet duly clamped, complete all as specified and directed.

S&Fsingle door sheet metal encloseure for DB's SPN,2 Way without bus bar, 240 Volts with one No, SPN MCB 20 ,'C' curve 10 KA and making connections, complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut mesured) and screwing existing steel tubing for alteration or additions (or lenghting screw on pipe to form connector) bore of pipe 80/100 mm,completee all as specified and directed.

M&L boring of holes under roads/pavements/ hard standing etc by using trenchless technology with ultra sound technique with and including HDPE pipe of 150 mm bore suitabel for pressure rating 0.4 Mpa, complete all as specified and directed.

Supply and installation of transfroemer step downout door type complete copper wound AC 3 Phase 4 Wire 50 C/S 63 KVA capacity 11000/433 volts (at No load) double wound oil cooled with externall cooling tubes, core type (a) 03 Nos Porclain HVBushng with arching horns on HV side suitable for 11 KV complete with bushing rod nuts & water. (b) One cable end box on LV side consisting of 04 Nos porcelain bushing suitable for LT armoured cable with bushing rod glands, joints etc. (c) Oil conservator with filter type drain valve and oil gauge. (d) Dehydrating silca gel breather with first fill of dehydrating agent/silica gel. (e) Explosive vent. (f) Thermometer pocket on tank cover. (g) One 3 Nos 100 mm dia thermometer vapour pressure minimum reading pointer maximum temperature indicator and resetting device. (h) Rating plate with terminal marking. (j) Two earthing terminal on tank. (k) OIl drain valve. (l) Lifting Lugs. (m) OIl filter hole with cap/plug incl connection. (n) AIr release valve plug, (o) For playing solid cast steel detachable rollers. (p) Extra bushing for neutral outside cable box for providing independent earthing for neutral. (q) First fill of transformer oil confirming to relevent IS and tested upto 60 KV di-electric strength. (r) MS channel of suitable size for embedding in foundation as per manufacture recommendation..

Supply Transporting, errection and fixing steel tubualr swaged pole in true vertical position of struts, 9.00 meters long, conforming to IS 2713, type 410 SP-31 complete with cast iron base plate, pole cap, firial tapper plug bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundatin and plinth block, disposal of surplus soil to a distance not exceeding 50 m, painting two coats of aluminium paintover one coat of red oxide primer including 3 nos band/straps wtih red psot office box colour (300mm wide each) synthetic enamelled paint at a distance 300 mm from plinth block and marking pole nos wtih black synthetic enamelled paint inluding tarring one coat on stee, surface embeded in concrete, complete all as specifed and directed.

supply, transporting, errectioni and fixing steel tubular swaged pole in true vertical position or struts, 11.00 metres long, conforming to IS 2713, type 410 SP-55, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation and plinth blcok, disposal of surplus soil to a distance not exceeding 50 m, painting coats of aluminium paint over one coat of red oxide primer including 3 Nos band/straps with red post office box colour (300 mm wide each) synthetic eneamelled paint at a distance 300 mm from plinth block and marking pole nos with black synthetic enamelled paint including tarring one coat on steel surface embedded in concrete, complete all as specified and directed.

M&L for dry and fine river sand free from sharp material as in cushioning to cable in trenches for cable protection including necessary punning and consolidatin as required, complete all as specified and as directed. (Depth of sand shall be measured after puning)

Supplying and laying pulverized fuel Ash-lime bricks (Fly ash bricks-non modular size), laid flat adjoining each other as in protectioin to UG cables, complete all as specified and directed.

Supply, fixing & jointing 40mm dia (Nominal bore) galavanised iron tubes 'Light grade' with and including all GI fittings such as flanges, unions reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to poles/walls or laid under roads/drain/nallah/floor etc including flat iron clamps, nuts, bolts and washers etc, complete all as specified and directed.

S&F new generationi energy efficent and envoirnment friendly long life Varsatile pressure die cast aluminium IP 66 Road way luminiare with high power LED 60 W as light source, complete with all accessories and duly rewired, including suitable GI pipe light grade bracket of 1.20 m length with clamps, nuts bolts etc, complete all as specified and directed. (Cat Part No LHETAXU7PN6J060 of Havells or Equivallent in Philips/Bajaja)

Supply and installating street light timer panel including astrnomical digital meter, contractor 3 Phase MCB for incomer and outgoing for overload and short circuit protection, prewire ready to use & locking arrangement Cat Part No IHXTS0912A of Make Havells or equivalent in Siemens/Schneider.

S&F drop out fuse unit expulsion type for outdoor air break gang operated switch single pole mounted on and including insulators for 11 KV working pressure fixed to and including MS channel with nuts, bolts and washer etc, synthetic bounded frus coming tube complete with nine fap suitable for current carrying capacity upto 100 Amps complete all as specified and directed.

Supply, installation, testing and commissioning HT 11 KV 3 Phase 50 Cycle outdoor type totally enclosed meteal clad switch gear complete with vaccum circuit breaker having rupturing capacity upto 200 MVA over load and earth fault protection, ammeter, volt meter and of rating 400 amps complete all as specified and directed.

RAJESH KUMAR SANJAY GUPTA

M/s Chitter Mal & Co.