Periodical Services to the building of Ordnance Factory Hospital ,Ishapore OFHI.

QUINTAL

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. after preparation of old wall M&L

Supplying & applying double coat oil bound distemper over one coat of alkali resistant priming paint after preparation of old wall surface by brooming down, steel wire brushing, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots. Make Asian, Berger, ICI. M&L

Supplying & applying double coat plastic emulsion paint over one coat of priming paint after preparation of old wall surface by brooming down, steel wire brushing, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots. Make Asian, Berger, ICI. M&L

Suplying & aplying one coat synthetic enamel paint on wooden surfaces after preparation of old surface. M&L

Suplying & applying one coat synthetic enamel paint on steel surfaces after preparation of old surface. M&L

Supplying & applying of two coat white wash after preparation of old wall.

Provi

ding and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for removal of wild growth. Superficial area n.exc 150 sqcm.

Taking down old cement plaster from brick/concrete wall of any description and nature at any place, position

Rendering 12 mm thick on fair face of brick work with cement plaster 1:6 complete in all respect including . Making smooth & finish without using extra cement.

Dismantling of Stone slabs and tiles laid, bedded & pointed in cement mortar.of any description or thickness in floors, aprons etc.

Supplying and fixing Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white cement to match. White Tiles

Supplying and laying Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match. White tiles

Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes. M&L

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Only fixing & repairing of existing Anodised aluminium snap grid frame work or G.I. frame work for false ceiling.

Supplying & fixing 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed on snap grid.

Supplying & fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. Including dismantling of existing pipe if any. 110mm dia

Supplying & fixing PVC (SWR) bends any radius. 110mm dia

Supplying & fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. 75mm dia

Supplying, making & fixing Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. Including removal of old frame if any 2nd class hard wood

Supplying & fixing PVC (SWR) bends any radius. 75mm dia

Supplying, making and fixing Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides including taking out of old door if any 40mm Thick

Supplying & fixing Mortice 4 lever brass lock, vertical type, size 100 mm

Supplying & fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including removal of old item if any.

Supplying & fixing 150mm mild steel barel tower bolts,

Supplying & fixing 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed

Supplying & fixing 150mm Mild steel pressed handles, oval type, stove enamelled black

Supplying, fabricating & fixing Powder coated Coloured or plane aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Providing and fixing Powder coated coloured or plane aluminium (minimum thickness of powder coating 50 micron) for shutters (any type) of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief Engineer-in-Chief.

Supplying, fitting & fixing 5.5 mm thick Sheet glass, one way glass or plane glass and glazing with oil putty in square exc 0.5 sq. m in each pane

Only repairing & fixing of Anodised aluminium door window shutters, including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supplying & fitting 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supplying & fitting 20mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L

Supplying & fitting 15mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L

Supplying & fitting 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms

Supplying & fiting 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)

Supplying & fixing Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples (Size of mesh 12mm) including taking out old cloth if any.

Supplying & fitting 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

Supplying, fitting & fixing Vitreous China Wash down water closet (Pedestal pattern), including cover white colour complete in all respect

Supplying & fixing 10 liter Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe.

Supplying & fixing Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. M&L

Supplying & fixing 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms)

Supplying & fitting PVC connections 15mm size with PTMT nuts of length 600mm

Dismantling of Brickwork built in cement mortar or cement lime mortar or cement concrete including all quoins, arches, pillars, etc, complete in all respect.

Brickwork with sub-class 'B' bricks, straight or curved on plan exc. 6m mean radius built in : Cement mortar 1:4. M&L.

Casting Cement concrete in foundations, filling and mass concrete. Typr B2, 1:2:4, 40mm graded aggregate. M&L