Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.9 Cr
EMD Value
₹4.0 L
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, R&B Division, Jamnagar
Widening and strengthening of Machhlivad Chhatar Arla Nana Panchdevda road Km. 7/100 to 9/900, Dist.: Jamnagar.
367900
17 of 2026-27
Open
Civil Works
Works
Jamnagar
4 documents required · 4 mandatory
₹6,000
Executive Engineer, RandB Division, Jamnagar
₹4.0 L
20 Nov 2026
20 Nov 2026
20 Nov 2026
7 Dec 2026
20 Nov 2026
90 days
Name of Work : Widening and strengthening of Machhlivad Chhatar Arla Nana Panchdevda road Km. 7/100 to 9/900, Dist.: Jamnagar.
BILL OF QUANTITIES
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
1 Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling 4.000 Hect. 28455.09
and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials
(C) By mechanical means in area of light jungle
2 Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including 8418.000 Sq.Mt. 42.59
stacking useful materials on road side and disposing off remaining stuff
3 Box cutting the road surface to proper slope and chamber for making a base for road work 8942.000 Cu.Mt. 111.85
including removing the excavated stuff and depositing on the road side slope as directed upto
4 Earthwork for embankment including breaking clods, dressing with all lead and lift and including 7770.000 Cu.Mt. 182.14
watering rolling and consolidation of subgrade in layers at O.M.C. to required dry density
including filling the depression which occur during the process using power roller 8T to 10T.(E)
From Borrow areawithin 15km lead
5 Construction of Granular Sub Base (Grading- VI) 200 mm by providing coarse graded material of 3987.000 Cu.Mt. 1033.70
grading as per Morth Spection (5th Revision), spreading in uniform layers with motor grader on
prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with
vibratory roller to achieve the desired density, complete as per MORTH specification.
6 Providing and laying compacted of 125 MM WBM of grading I , B.T.M.C.metal including 1200.000 Cu.Mt. 1272.60
spreading watering and consolidation by vibratory roller etc complete.
7 Providing and laying compacted of 125 MM WBM of grading II , B.T.M.C.metal including 1120.000 Cu.Mt. 1274.62
spreading watering and consolidation by vibratory roller etc complete.
8 Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam 838.000 Cu.Mt. 1194.83
(WMM) 100 mm specification including premixing the material with water at OMC in mechanical
mix plant carriage of mixed material by tripper to site, laying in uniform layers with paver in sub
base / base course on well prepared surface and compacting with vibratory roller to achieve the
desired density.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
9 Providing and applying PRIMER COAT with SS1 Emulsion using emulsion pressure distributor at 8372.000 Sq.Mt. 106.05
the rate of 0.75 kg/sqm on prepared surface of granular base including clearing of road surface
using mechanical brooms.
10 Providing and Laying 50 mm thick (Compacted) Bituminous Macadam in single layer on the 1890.000 M.T. 4132.92
existing B.T. surface using stone chips as per gradation and using Bitumen VG-30 for tack coat
2.50 Kg./10 Sqmt. on B.T. surface and 34 Kg. i.e. 3.40% 1 M.T. of mix VG-30 Grade by using stone
chips as per MOSRT&H specification inclduing heating asphalt and aggregates by continous
batching Drum Mix Plant and spereading by paver finisher including consolidation with vibrato
roller and providing, operating plant machineries, equipment, tools, plants, oil fire wood,
keresone and all labour charges etc. complete.
11 Providing and laying 25mm thick S.D.B.C. using stone chips dust as per gradation and using 930.000 M.T. 5298.46
bitument at rate of 50.00 Kg / M.T. using stone chips as per M.O.R&TH specification including
heating the asphalt VG-30 Grade and aggregates by continuous batching Drum Mix Plant and
spreading the same by paver finisher including consolidation with Vibrator Roller and providing,
operating plant machineries, equipment, tools, plants, oil, fire wood, kerosene and all labour
charges etc. complete.
12 Providing & Laying asphalt painting on B.T.Surface with bitumen grade VG-30 at the rate of 5.00 16100.000 Sq.Mt. 57.17
Kg/ 10 smt, by Mechanical sprayer & spreading the stone dust on prepared surface at the rate of
0.03 cum / 10 smt. & rolling with smooth wheel & Pneumetic tyred roller & brushing etc, comp,
13 Supplying , stacking, spreading , rolling and watering Hard Murrum as directed for side shoulder 974.000 Cu.Mt. 474.71
as directed with all lead & lift.
14 Providing and casting in situ controlled Trimix cement concrete M30 for 200mm thick laid as 420.000 Cu.Mt. 6055.96
directed with 20mm down coarse aggregate of the required size including reinforcement,
formwork, placing in position, temping vibrating, curing, finishing and filling in joints with
bitumen etc. complete as directed by Engineer In charge.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
15 Providing and placing in position High Yield Strength Deformed (HYSD) bars reinforcement (TMT 20.750 M.T. 73384.00
Fe 550D grade) bar conforming to IS 1786 of all categories for various items including cutting,
bending, hooking and tying with 18 gauge mild steel binding wires, supporting in position to
ensure lines and levels during concreting, maintaining proper cover / spacing etc. complete as
per specification and detailed drawing.
For Approach slab, Wearing coat, Footpath, Kerb, Headwall, Parapet etc.
16 Providing and filling in foundation with ordinary Cement concrete M10 mix and providing 216.000 Cu.Mt. 3362.25
necessary vertical pin headers including formwork, vibrating, ramming and curing complete.
17 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4.000 No. 5077.27
4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design
of IRC-67-2012. Pretreated with phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade
retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr
long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as vrequired and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol foreach board shall be as per theinstruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
18 STOP Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP 2.000 No. 5108.58
(Aluminum composite Panel); size 90 cms. Octagonal as per design of IRC-67-2012. Pre treated
with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol for each board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting.
19 Village Name Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm 1.000 No. 6313.51
ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35x 35 x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol or inscription/letters / numerals for each board shall be as
per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (A)Class-C Type-11 Retro Reflective
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
20 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 1.000 No. 26572.09
4mm ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long
(2 Nos.)stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol foreach board shall be as per theinstruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting
21 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 6.000 No. 5906.48
4mm ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35x 35 x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg. including
excavation,curing etc.complete under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product offered shall be submitted
by contractor. (A) Class-C Type-11 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
22 Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 1.000 No. 14085.46
4mm ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long
(2 Nos.)stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol foreach board shall be as per theinstruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting
23 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium 5.000 No. 4618.73
sheet / 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product offered shall be submitted
by contractor. (A) Class-C Type-11 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
24 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin 1200.000 Sq.Mt. 367.72
surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface
applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from
streaks and holes. zebra patta / bump patta lane/center line/ edge line/cut patta. The white
color marking should provide liminance coefficinet on cemend road shalll be min
mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day
time. The marking should meet the performance criteria for night time reflectivity, wet
reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warrenty for retro
reflectivity shall be 2(Two) years.
25 Cat Eye / Road Stud/RPM: Supplying of Molded Twin Shanks Raised Pavement Markers made of 625.000 No. 326.23
polycarbonate and ABS moulded body and reflective panels with Micro prismatic lens (No Glass
bead lens) capable of providing total internal reflection of the light entering the lens face and
shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No RW/NH/33023/10-97-DO Ill Dt 11.06.
The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum
reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/-5 degree. The
strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/-
mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf.
Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using
epoxy resin based adhesive as per manufacturer's recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed by Engineer-in-charge.
26 Providing and Fixing Ordinary Kilometer stone of precast C.C. 1:2:4 including necessary 3.000 No. 704.33
reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc. complete
(For O.D. road V.R.)
27 Providing and fixing Hectometer as per I.R.C. type design including painting, lettering etc. 17.000 No. 356.50
complete.(ii) Fixing in C.C. 1:5:10
28 Providing and Fixing Guard stone as per I.R.C. type design including white washing etc. 3375.000 No. 350.80
complete.(ii) Fixing in C.C. 1:5:10
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
29 Route Marker sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 1.000 No. 5108.58
mm ACP (Aluminum composite Panel); size 60x45 cm rectangular plus 30x25cm additional plate
as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6 mtr long stand post of 75 x75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of 35x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. the details of symbol or inscription /
numerals for each board shall be as per the instruction of engineer in charge.The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test
report from third party test lab for the product offered shall be submitted by contractor. (A)
Class-C Type-11 Retro Reflective sheeting
30 Hazard Marker Sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 24.000 No. 3666.30
3mm ACP (Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T.Specifications; 1.8mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product offered shall be submitted
(A) Class-C Type-11 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
31 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP 50.000 No. 4681.35
(Aluminum composite Panel); size 60x50 cm as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best
quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11
as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x75 x 6mm /
65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x
5mm; painted with bestquality epoxy coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the instruction of engineer in charge.The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation,
curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the
Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
32 Painting two coats after filling the surface with synthetic enamel paint in all shades on new 288.000 Sq.Mt. 81.81
concrete Kerb surfaces
33 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash 240.000 Rmt. 3405.72
barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground
level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,
1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the
vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per
34 Excavation for Foundation of Piers, Abutment foundations in sand, gravel, clay, soft soils, 590.000 Cu.Mt. 523.28
murrum, hard murrum, boulders, very stiff or sticky clays, soft rock, etc. including shoring,
strutting and dewatering as necessary and depositing of the excavated stuff as directed for all
lead, back filling the excavated pit by approved excavated material etc. complete as per
Depth upto 3.0 m below GL
35 Providing and casting in situ ordinary cement concrete M10 for RCC Raft and cut-off walls 46.000 Cu.Mt. 3362.25
including necessary shuttering laying, vibrating, ramming and curing complete.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
36 Providing and casting in situ ordinary cement concrete M15 for Bedding of Pipes as per detail 262.000 Cu.Mt. 3789.70
drawing, including necessary shuttering laying, vibrating, ramming and curing complete.
37 Supplying and fixing Reinforced concrete heavy duty non‐pressure pipes with collars for culverts 145.000 Rmt. 6621.26
including setting and joining the pipes in C.M. 1:2 watering and laying (to level or slope) of I.S.
class NP4 of following internal diameters. 1200mm
38 Providing and casting in situ Ordinary cement concrete M-200 for R.C.C. Raft and cut-off walls 555.000 Cu.Mt. 4219.78
including necessary shuttering laying, vibrating, ramming and curing complete.
39 Flexible Apron :Construction of flexible apron 300mm thick comprising of loose stone boulders 129.250 Cu.Mt. 1092.52
weighing not less than 40 kg beyond curtain wall.
40 Dismantling the existing structure including removing and stacking the dismantle led material for 34.640 Cu.Mt. 952.51
all lead as directed. by Engineer-in-Charge
41 Earth work for embankment including breaking clods, dressing with all lead and lift and including 1310.000 Cu.Mt. 163.95
watering, rolling and consolidation of subgrade in layers at O.M.C. to required dry density,
including filling the depressing, which occurs during the process using power roller of 8 tonne to
10 tonne all as per specification.
42 Providing and laying 200 mm thick Granular Sub base in required layer by providing Coarse 148.000 Cu.Mt. 1129.18
graded material Grading-II using B.T.M.C. Metal, crushed stone aggregate 26.5mm to 4.75mm at
75% and below 2.36mm at 25% having CBR not less than 25% as per Table 402 of MORT&H
gradation including leveling the materials at the site of work, mixing & spreading in to grade and
camber, watering and consolidation at OMC with vibratory roller including the cost of materials,
labours etc. complete.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
43 Men at work (Heavy) sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 10.000 No. 9148.18
4mm ACP (Aluminum composite Panel); size 120cm x90cm rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6 mtr long
stand post (2 Nos.) of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black
and white bends. the details of symbol or inscription / numerals for each board shall be as per
the instruction of engineer in charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer
in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer &
a certified copy of 3 year outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting
44 Diversion Ahead Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 10.000 No. 9867.07
4mm ACP (Aluminum composite Panel); size 180x60 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.1 mtr long
stand post (2 Nos.) of 50 x 50 x 5mm / 50NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol foreach board shall be as per theinstruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
45 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium 10.000 No. 3540.12
sheet / 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product offered shall be submitted
by contractor. (B) Class-B Type-4 Retro Reflective sheeting
46 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 10.000 No. 3906.19
4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design
of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity
Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D- 4956 and latest
M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted
with bestquality epoxy coatings in black and white bends. The details of symbol for each board
shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof
size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 7 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro
Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of
my /our tender works out as under.
* Estimated Amount * Estimated Amount
put to tender put to tender
Deduct :…………% Below Add :………%Above
In Words …………………………………… In Words………………………………
* (Please strike out whichever is not applicable).
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C
Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5 The credit for diversion at Rs.4,52,556.12 shall be deducted from R.A. bills.
Deputy Executive Engineer Executive Engineer
R & B Sub Division R & B Division
Jamnagar Jamnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ_WIDENING_MACHHALIVAD_CHHATAR.pdf
GR TO BE ATTACHED part 1.pdf
GR TO BE ATTACHED part 2.pdf
NEW Tests Schedule_WIDENING_MACHHALIVAD_CHHATAR.pdf
REVISED SBD VOLUME-3.pdf
SBD VOLUME-1 WIDENING_MACHHALIVAD_CHHATAR.pdf
SBD VOLUME-2_compressed.pdf
SBD VOLUME-4.pdf
Jamnagar E-Tender-17.pdf
SBD - Annexure - Jamnagar Chhatar-Arla.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .