Purchase of building materials

Amount

Purchase of building Material

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Portland Cement

Coarse sand (zone III)

Laterate stone of size 35x20x20cm

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

wall form panel 1250x500 mm

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Adjustable span ESO+SI (2.35-3.40)

Stone Aggregate(single size): 40 mm nominal size

Twisted steel/deformed bars

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

M.S. heavy weight butt hinges 125x90x4.0 mm IS : 1341 marked

Bright finished or black enameled mild steel screws 50 mm

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Anodised Aluminium tower bolt (barrel type)300x10 mm

Chromium plated Brass screws 30 mm

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC Tee 63x63x63 mm dia

PVC Elbow 63 mm dia

PVC door Elbow 63 mm dia

PVC pipe 150 mm outer dia 6kgf/cm2

Fine sand (zone IV)

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Dry distemper

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm