Working Estimate for New Division Office Building in Trichy District for the year 2024-2025

Amount

New Division Office

Wiring with 2 x 1.5 sqmm copper P.V.C. insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size Modular MS box of 16g thick concealed and for 5 amps 5 pin plug Modular socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., complete complying with relevant standard specification and as directed by the departmental officer.

Wiring with 2 x 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990and with continuous earth by means of 1.5 sqmm copper insulated unsheathed single coreMulti Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size Modular MS box of 16 g thick concealed and for following work controlled by 5 amps flush type Modular switch including circuit mains cost of all materials, specials etc., complete complying with relevant standard specification and as directed by the departmental officer. - Light point with ceiling rose.

Repairing rewinding and fixing of AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator) including cost of all materials, specials etc. all complete and as directed by the departmental officers.

Supplying and fixing of Health faucets and Two Way CP Tap including cost of fittings labour for fixing etc., all complete and as directed by the departmental officers., (The quality of fittings should be got approved from the competent authority before use)

Supplying and fixing Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

Supplying & Fixing in position of Aluminium anodized partition with 62 x 38 x 2 mm extruded box section at bottom, vertical and horizontal members. The vertical member are spaced at 90 cm centre to centre and to horizontal members are spaced at 1.20m, 2.10 m and 2.40m height from the floor level, panels should be covered with 9mm thick Novapan with necessary glassing clips, rubber beading etc., including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original condtions after fixing as ditrected by the departmental officers. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specifications for an average anodic film thickness of not less than 15 microns. All materials should be got approved by the competent authority before fixing in position.

Supply and fixing of 18W 4 Feet LED Fitting with LED -Higher End on wall all complete complying with relevant standard specifications & as directed by the departmental officers.(The Tube light fitting and bulb should be of reputed Brand and it should be got approved by the Competent authority before fixing).

Supply and fixing of 48W LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) - HIGHER END- Street Light Fitting with LED in all complete complying with relevant standard specifications & as directed by the departmental officers.(The Tube light fitting and bulb should be of reputed Brand and it should be got approved by the Competent authority before fixing).

Supply and fixing of 4 FEET LED FITTING - LOWER END -15W LED Bulb in all complete complying with relevant standard specifications & as directed by the departmental officers.(The Tube light fitting and bulb should be of reputed Brand and it should be got approved by the Competent authority before fixing).

Sub Total

GST at 18%

M.Mohamed Hussain (BID ID -1174937)