e tender for the Office Furnishing works at Thiruvananthapuram

e-tender for Office Furnishing works at Thiruvananthapuram For more details refer tender documents

1st BASEMENT FLOOR [ SL.No.1.01 to 11.01] Team head Table Main Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.60mm width & 30cm height modular partition with pinup & write up above the table top.(W/O KB/CPU) Size:180 (L)x80(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . Size:90 (L)x45(W)x75(H)

Team Chair (Model - Exotic-01) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair (Model - Fiesta F) Medium back Chair -Cushioned seat ,Mesh back , PP arms ,and Sledge base.

Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire etc. Size: 100(L)x55(W)x75(H)

CPU Trolley Suppling and installing CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to easy out the wire accessibility from the CPU

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Mini Conference/Discussion table Legs are made of 50x50 square steel tube & connectors are of 50x25 rectangular steel tube of 16 swg. Metalic race ways below table top for wire management, 18mm thick prelaminated particle board leg modesty. 25mm thick prelaminated particle board table top confirming IS 12823 with 2mm PVC edge band, 2 tone additional lipping table top, Knock down fitting, popup unit, level adjusters with side, top unit. Size: 180(L)x60(W)x75(H)

Conference Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Storage Made of 18mm thick prelaminated board confirming IS 12843, PVC edge banded, knock down fitting ,horizontal pannels at a distance of 45cms, vertical support to be provided at an intrevels of 80/90cms. Hardware like handle, lock and key, mini fiX, powder coated chip board screws, PVC right angle block, SS shelves support, level adjusters etc. Size: 570(L)x45(W)x240(H)

Window Blind Roller type blinds, pvc chain mechanism, inside and out side mount, light filtering polyester cloth etc including Fitting charge

Ground Floor [SL.NO.12.01 to 21.01] Reception Table Fully made of 18mm thick prelaminated particle board. Main table top @ 75cm H and 2nd table top @ 105(H)cm. Designer modesty panel, gromet for wire management, level adjusters etc. Size:240(L)x60(W)x105(H)

Reception Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire etc. Size: 100(L)x55(W)x75(H)

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

CPU Trolley Suppling and installing CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to easy out the wire accessibility from the CPU

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

3 Seater Sofa Made of hard wood frame and cushioned with 32 density PU form, upholstery with good quality art leather

TEAPOY Under structure made of steel tube and table top made 12mm thick glass.

Corner Table

Window Blind Roller type blinds, pvc chain mechanism, inside and out side mount, light filtering polyester cloth etc

First Floor [SL.No. 22.01 to 32.01] Manager Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.(W/O KB/CPU) 210(L)x80(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . 100(L)x45(W)x75(H) Back Unit -BACKUNIT-Made of 18mm prelam board, PVC edge banded, sliding/ hinge doors, kwock down fitting, horizontal pannels at a distance of 45cms, vertical support to be provided at an intervel of 80/90cms. Hardware like handle , lock and key, minifix, powder coated chip board screws, PVC right angle block, ss sheves support, level adjusters etc. 240(L)x45(W)x75(H)

Manager Chair -(Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C-Tilt, Nylon Base, Adjustable lumber support.

Conference Table Legs are made of 50x50 square steel tube & connectors are of 50x25 rectangular steel tube of 16 swg. Metalic race ways below table top for wire management, 18mm thick prelaminated particle board leg modesty. 25mm thick prelaminated particle board table top confirming IS 12823 with 2mm PVC edge band, 2 tone additional lipping table top, Knock down fitting,3nos popup unit, level adjusters etc. 450(L)x180(W)x75(H)

Conference Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Conference Head Chair (Model - Exotic 1) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C.Tilt, Nylon Base, Adjustable lumber support

Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire etc. Size: 100(L)x55(W)x75(H)

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Visitor Chair (Model - Fiesta F) Medium back Chair -Cushioned seat ,Mesh back , PP arms ,and Sledge base.

PA Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip board screw etc. powder coated rectangular steel tube structure below the table top.(W/O KB/CPU) 120(L)x60(W)x75(H)

PA Chair (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, c-Tilt, Nylon Base

Window Blind Roller type blinds, pvc chain mechanism, inside and out side mount, light filtering polyester cloth etc

SECOND FLOOR [SL.No.33.01 to 40.01] Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire etc. Size: 100(L)x55(W)x75(H)

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

CPU Trolley Suppling and installing CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to easy out the wire accessibility from the CPU

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Team Leader Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.60mm wiidth & 30cm height modular partition with pinup & write up above the table top.(W/O KB/CPU) 180(L)x70(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . 90(L)x55(W)x75(H)

Visitor Chair (Model - Fiesta F) Medium back Chair -Cushioned seat ,Mesh back , PP arms ,and Sledge base.

Team Chair (Model - Exotic-01) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C Tilt, Nylon Base, Adjustable lumber support

Window Blind Roller type blinds, pvc chain mechanism, inside and out side mount, light filtering polyester cloth etc

THIRD FLOOR [SL.No.41.01 to 52.01] Workstation Table Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 16swg. Metalic duel raceways with punch out for electrical & data wire management, Level adjuster, 25mm thick prelaminated particle board table top confirming IS12823 with gromet for wire management, 4+4mm sandwitch glass privacy panel fitted on the table top by using TPC, metalic vertical wire etc. Size: 100(L)x55(W)x75(H)

Keyboard Tray suppling and fixing of keyboard trays made of Prelaminated board with telescopic sliding channels

CPU Trolley Suppling and installing CPU trolleys made of powder coated MS sheet with adjustable width ,front and back open and provided with 4 adjustable castors to easy out the wire accessibility from the CPU

Workstation Chair - (Model - Porus) Medium Back Chair- Mesh Back, Cushioned Seat, Adjustable PP Arms, Adjustable Lumber support, Gas Lift, syc.Tilt, Nylon Base

Team Leader Table Fully made of prelaminated particle board confirming IS 12823. 18mm thick leg with 2mm PVC edge band additional 2 tone lipping for table & leg, 25mm thick table top with 2mm thick PVC edge band, designer modesty panel, M6 level adjusters, minifix, L clamp, right angle block, powder coated chip boardscrew etc. powder coated rectangular steel tube stracture beloiw the table top.60mm width 30cm height modular partition pinup & write 180(L)x70(W)x75(H) Side Table Fully made of 18 mm thick prelaminated particle board confirming ISI2823 ,Visible edges are lipped with 2 mm PVC edge band ,2 drawer pullouts & hinge doors with lock key &handle ,knock down fitting etc . 90(L)x45(W)x75(H)

Team Chair (Model - Exotic-01) High Back Chair- Mesh Back, Cushioned Seat, Head rest, PP Arms, Gas Lift, C Tilt, Nylon Base, Adjustable lumber support.

Visitor Chair (Model - Fiesta F) Medium back Chair -Cushioned seat ,Mesh back , PP arms ,and Sledge base.

Table for Recreation Legs are made of 50x50 SQ steel tube and connectors are of 50x25 rectangular steel tube, 25mm thick prelaminated particle board table top confirming IS12823 with 2mm pvc edge banded. 120(L)x90(W)x75(H)

Chair for Recreation Injection moulded polypropylene molded shell chair.

Pantry Table Fully made with 18mm thick BWP plywood laminated with 1mm thick mica & .8mm thick balancing mica under structure made 50 x 50 micron epoxy polyester powder coating.

Pantry Chair Injection moulded polypropylene molded shell chair.

Window Blind Roller type blinds, pvc chain mechanism, inside and out side mount, light filtering polyester cloth etc

Transportation