Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.7 L+₹47,615 (1.15%)Rejected-AOC VATTAKUDIYIL BUILDINGS THANKALAM KOTHAMANGALAM POST ERNAKULAM DISTRICT KERALA PIN 686 691 | KOTHAMANGALAM | ERNAKULAM | KERALA | 686691 | L2 | Rejected-AOC Not being L1 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(CG)KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
PROVISION OF RAIN WATER HARVESTING SYSTEM AT CGAE KOCHI AND ADDITION/ALTERATION TO THE EXISTING FLAG MAST / PARADE GROUND AND ASSOCIATED WORKS AT CGAE KOCHI.
2023_MES_593237_1
8864/E8
Open Tender
Civil Works
Item Rate
180 days
NEDUMBASSERY
As per NIT/Tender documents
8 documents required · 8 mandatory
₹500
GE(I)(CG)KOCHI
₹77,000
Yes
12 Jul 2023
4 May 2023
13 Jun 2023
4 May 2023
6 Jun 2023
18 May 2023
4 May 2023 - 11 May 2023
Amount
Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified and as directed.
Excavation over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation over areas exc 1.5 m depth and n. exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation over areas exceeding 3 m and not exceeding 4.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation over areas exceeding 4.5 m and not exceeding 6 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
Removing excavated soil to a distance exc 1.5Km and not exc 5Km and deposited where as directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
Material and labour for Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work all as specified and as directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and as directed.
Material and labour for providing reinforced cement concrete 1:2:4 type B1 nominal mix using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and directed.
Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.
Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:4 all as specified and as directed.
Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick masonry/concrete , finished even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.
Use and waste for form work to to well steining and well curbs. fair finished surface of concrete Square, rectangular or polygonal all as specified and as directed.
Material and Labour for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in Well steining and well curbs complete all as specified and as directed.
Supply and Fix PVC (SWR) pipes 200 mm dia. single socketed, in any length with rubber ring joints, laid in trenches/floors or fixed in walls complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) junction single 200 mm bore, (single T) equal or unequal with access door complete all as specified and as directed.
Supply and Fix PVC (SWR) bends any radius 200mm bore dia complete all as specified and as directed.
Demolition of cement concrete including Pavement quality concrete (PQC) in floors, aprons etc of any description, complete all as specified and as directed.
Material and labour for Pavement quality concrete (PQC) of flexural strength 45 Kilogram per sq cm (Lower Control Limit - LCL)) in field as per mix design by IRC 44 (Latest revision) (using less than 31.5mm size of graded stone aggregate) and mix with super plastisizer (if required) subject to cement content not less than 400 Kg cement per cubic metre, using Polyester triangular (non circular) synthetic fibre reinforcement @ 0.25% by weight of cement, placed, spread, compacted, finished by using slip form sensor paver, (Pavement quality concrete thickness 300mm) including necessary form work, bull nozing / rounding of edges, finishing by brooming, curing etc complete and laying in bays all as specified and as directed. Note: (i) Forming expansion joints shall be measured and paid separately under respective items. (ii) Deduction shall be made in computing concrete quantity for expansion joints. (iii) No price adjustment shall be applicable if excess quantity of cement content is used/approved in the execution of work under this item. (iv) Polyester triangular (non circular) synthetic fibres as secondly reinforcement mixed in concrete 12mm long with circum circle diameter 30-35 micron, designed for melting point of 240-260 degree Celsius and having specific gravity of 1.34 to 1.40. The material shall be procured from approved manufacturer and will be measured and paid for separately under relevant Item hereinafter. However labour element for mixing shall be deemed to be included in the quoted rate. (v) Textured finished surface of concrete pavement shall be made while concrete is green. (vi) Initial curing compound confirming to ASTM C 309 type II, Class A of make Sika / BASF / Fosroc shall be sprayed as per manufacturer's instructions and cost of same is deem to be included in the unit quoted rate.
Supply only Polyester non circular/ triangular synthetic fibres as secondary reinforcement mixed in pavement quality concrete, 12mm long with circum circle diameter 30-35 micron, designed for melting point of 240-260 degree Celsius and having specific gravity of 1.34 to 1.40. as per manufacturer's instruction.
Material and labour for forming expansion joint for full depth of 425mm deep, filled with HDD filler board to a depth of 380mm, 30mm dia back up rod and then priming, masking tape, minimum depth of filling 10mm and 25mm wide filled with polyurethane based sealant over two coats of primer in joints by mechanical means all as manufacturer's instructions with movement accommodation factor (MAF) +30% with a performanance warranty of minimum ten years all as specified and as directed. Note:- (i) Technical specifications should meet the requirement mentioned in BS-5212, BS-4254 and EN-141875-2003 (for hydrolysis/water resistance test).In addition, the movement accommodation factor (MAF) of the sealant should be minimum ± 30 %. (ii) The side shall be primed and provision of closed cell polyethylene backup rod 30 mm dia and applying masking tape on edge of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant and removing the marking tape after sealant applied complete all as specified and as directed.
Boring and drilling of 8 inches dia through any type of soil/strata using mechanical means of machinery including erection lowering the Tools and plants at any place and in any position complete all as specified and as directed by Engr in Charge
Demolition of brick or PCC block masonry built in cement mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in foundations including raft, footings , plinth beam, bases for columns, basement slabs and mass concrete and similar work complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, bressummers, lintels over 1.5M span etc complete all as specified and as directed.
Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed
Material and labour for RCC M-30 Design mix using 20mm graded stone aggregate as in retaining walls, basement walls and the like any thickness above top of footing including attached pilasters and buttresses complete all as specified and as directed. NOTE :- Reinforcement and formwork shall be measured and paid separately.
Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and as directed.
Use and waste of formwork to sides of pillars, post, struts, piers, coloumn and stanchions, square, rectangular or polygonal, fair finished surfaces of concrete all as specified and as directed.
Use and waste for form work to sto faces of walls, retaining walls and similar work including attached pilasters, buttresses etc., vertical or to batter for rough/fair finished surfaces of concrete, flat, complete all as specified and as directed.
Material and labour for 15mm thick rendering on brick/concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for preparation of plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.
Material and labour for plain cement concret 1:3:6 type C-2, 100mm thickness using 40 mm graded stone aggregate as in sub bases and pavings complete all as specified and directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Supply and fix structural steel work in square/rectangular hollow sections including special shaped washer of 6mm thick MS sheeting etc, cutting, welding, bending in shape using hollow sections of YST 310 grade conforming to IS - 4923 complete all as specified and as directed.
Supply and fix Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W quality A (Gde-E-250) complete all as specified and directed.
Supply and fix 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10 mm thick backing coat in CM 1:4 complete all as specified. Including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc).
Supply and fixing Stainless steel wire ropes are generally be of 6 mm dia, 7/19 construction with central core being stainless steel only. The grade of wire ropes are in accordance to AISI 316. The breaking load of each rope is not less than 2350 Kg including providing fixing anchorage system complete necessary excation and grouting with PCC 1:2:4 complete all as specified and as directed.
Supply and fixing LM6 Aluminum pulley arrengment for wire rope and for cable with bush bearing mounted through stainless steel shaft shall be suitable to accommodate wire ropes complete all as specified and as directed.
Material and Labour for 4mm thicknes stainless steel 100mm outer dia heavy duty flag post consist of Stainless steel code SS 304 surfcae finishing coated fixed at any position and in any dorection including cutting gas / fillet welding complete including holding bracket at top and tieing assembly complete all as specified by Engr in Charge
Material and Labour for stainless steel 40mm outer dia heavy duty as in harizondal bracing of flag post consist of Stainless steel code SS 304 surfcae finishing coated fixed at any position and in any dorection including cutting gas / fillet welding complete including holding bracket at top and tieing assembly complete all as specified by Engr in Charge
Supply and fixing stainiess Steel grade 304 Pipe 75mm dia average height of each post not less than 0.90 mtr and not greather than 1.00 mtrs poles as in periphery barricading of falg mast complete necessay fixing arrangement including excavation for post hole and PCC 1:2:4 type B1, and matching with surfaces complete all as speficifed and as directed by Engr in Charge
Supply and fixing Stainless Steel grade 304 coil chain of 6mm thickness heavy duty as in peripheral barricadding of flag mast complete all as speficifed and as directed by Engr in Charge
Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coated 0.5mm thick having tensile strength of 550 Mpa with coating thickness prepainted plain galvalume sheeting as in ridge and cladding, fixed with GI self tapping screw complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 metre away and depositing where as directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.
Supply and Fix concertina coil of 700 mm outer dia made out of 2.60mm dia spring steel wire 230gm (2min) dipped with corrosion preventive fluid (rusilo 901) of castrol make incl white colour, each coil having min 50 turns (circles) and an average weight not less than 8.57 kg (plus or minus 5%) including handle and spike at both ends of coil errected in position on top of mild steel angle by fixing with MS rod for securing incl necessary welding to MS sections etc including taking out old concertina complete all as specified and directed.
Supply and fix in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including secruing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)
Schedule of Credit (Minus) Rs.1250.00 NOTE: Bidder shall insert credit amount of Rs. 1250.00 as rate in Green field under Col-13.
Phoenix engineers and construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .