Building

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

1 Providing and laying cement concrete 1:3:6 Cement : 3- 11.00 One 3072.60

Coarse sand : 6- Graded brick bat aggregate 40mm Cum

normal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

2 Providing and laying controlled cement concrete 16.00 One 5724.78

M.200 and finishing smooth with curing etc complete, Cum

including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (A) Plinth Beam

3 Filling available excavated Earth (Excluding Rock) in 57.00 One 136.92

trench plinth side of foundation etc. in layer not Cum

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

4 Filling in plinth with Sand under floor in layers not 31.00 One 481.80

exceeding 20 cm incl. consolidatig each deposited Cum

layerby ramming and watering etc. Complete

5 Conveyance Of Available Excavated Material AS 20.00 One 90.20

Directed And Aprroved By Enginner In Charge Etc. Cum

6 Providing and laying controlled cement concrete 10.00 One 7014.64

M.200 with curing etc complete, including the cost of Cum

formwork but excluding the cost of reinforcement for

R.C.C. work in (B) Beams For All floor

7 White Stone Bela mesonry work in partition walls 27.00 One 684.49

upto 15 cm thickness in cement Mortar 1:4 (1- Cement Sqm

: 4-course sand) for All floor

8 Providing and laying controlled cement concrete 2.00 One 7810.72

M.200 and finishing smooth with curing etc complete, Cum

including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (C) Lintel & Sill

9 Providing and laying controlled cement concrete 1.00 One 7165.50

M.200 for RCC Chhajjas not exceeding 10 cm Cum

thicknesss up to floor two level including finishing

exposed surface with cement mortar 1:3 (1- Cément,

Fine sand) to give a smooth and even surface with

curing etc complete including the cost of form work

but excluding the cost of reinforcement. [D] Chhajja

10 Providing and laying controlled cement concrete 23.00 One 6846.13

M.200 with curing etc complete, including the cost of Cum

formwork but excluding the cost of reinforcement for

R.C.C. work in (E) Slab For All floor

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

11 Providing and laying controlled cement concrete 2.00 One 7742.36

M.250 with curing etc complete, including the cost of Cum

formwork but excluding the cost of reinforcement for

R.C.C. work in (F) Staircase For All Floor

12 Providing TMT Bar FE 500D reinforcement for R.C.C. 5664.00 One 77.29

work including bending, binding and placing in Kg

position complete upto floor two level

13 Providing 10mm thick cement plaster in single coat on 148.00 One 171.71

brick/concrete Ceiling for interior plastering and Sqm

finished even and smooth With floating coat of neat

cement slurry. (i) Cement mortar 1:3 (1-cement:3-

sand). All Floor

14 Providing 15mm thick cement plaster in single coat on 374.00 One 195.42

brick/concrete Wall for interior plastering and Sqm

finished even and smooth With floating coat of neat

cement slurry. (i) Cement mortar 1:3 (1-cement:3-

sand). All Floor

15 Providing 20mm thick cement plaster in single coat on 366.00 One 250.54

single or half brick walls for interior plastering upto Sqm

floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

16 Making 10mm groove in plaster work at Junction of 150.00 One 27.27

wall between RCC member and Brick works in Rmt.

Internal & Out Side plaster with applying all

necessary tools and plants inclusive of labour and

17 Providing and laying Vitrified tiles 8 to 10 mm thick, 120.00 One 1120.36

24" x 24" in flooring treads of steps and landing laid Sqm

on a bed of 12mm thick cement mortar 1:3 (1-cement:

3-coarse sand) finishing with flush pointing in white

18 Providing and laying Vitrified tiles 8 to 10 mm thick, 19.00 One 1195.02

24" x 24" in skrting risers of steps and dedo on 10mm Sqm

thick cement plaster 1:3 (1-cement: 3-coarse sand) and

jointed with white cement slurry

19 Providing and laying Ceramic tiles 6mm thick in 11.00 One 900.29

flooring treads of steps and landing laid on a bed of Sqm

12mm thick cement mortar 1:3 (1-cement: 3-coarse

sand) finishing with flush pointing in white cement

20 Providing and laying 300 x 300 x 12mm Tactile 12.00 One 1890.92

ground Surface indicator Tiles flooring over 20mm Sqm

(Average) base of Cement Mortar. 1:6 (1-Cement:

Coarse Sand) on new surface With Epoxy Grout And

Spacer including cleaning

the surface etc, complete

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

21 Providing and laying polished Kota stone slab 42.00 One 1019.39

flooring over 20mm (Average) thick base of cement Sqm

mortar 1:6 (1-cernent: 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5-coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

22 Providing and fixing pre-cast Rubber Dye / steel Dye 173.00 One 706.93

inter Jocking concrete block 60mm thick with grade of Sqm

concrete M300 pnumatic compressed/ vibrated

mechanically and as per approved design Confirming

to IS 15658 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC SP 63-2018 etc.

23 Providing and laying marble stone slab 18mm to 30.00 One 2991.90

20mm (Ave.) th. For Jam sill as per design incl full Sqm

molded round front edge of sill laid on 20mm th.

Cemenr mortar 1:6 (1-cement: 6 coarse sand) jointed

with gray cement slurry incl. rubbing and polishing

24 Provoding and fixing flush door Double shutters of 35 6.00 One 4034.05

mm th., solid core construction with Laminated Both Sqm

side including anodised alluminium butt hinges,

Handle, Morties Lock, S.S. Aldrop, s.s. Stopper And

with necessary Fixtures, as Directed and Approved By

engineer Incharge etc Comp.

25 Provoding and fixing flush door Single shutters of 35 10.00 One 4549.53

mm th., solid core construction with Laminated Both Sqm

side, including anodised alluminium butt hinges,

Handle, Morties Lock, S.S. Aldrop, s.s. Stopper And

with necessary Fixtures. as Directed and Approved By

engineer Incharge etc. Comp.

26 Providing and fixing FRP frame size 125x65 mm and 5.00 One 2019.98

35mm thick FRP shutter with wood grain raised Sqm

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkall. Rates are to be inclusive

of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings

27 Providing and fixing M.S. grills of required pattern to 400.00 One 106.23

wooden frames of windows etc. with M.S. flats at Kg

required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws

(A) Plain Grill.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

28 Painting Two coats (including priming coat) on New 16.00 One 128.95

steel and other metal surface with enamel paint, Sqm

brushing to give an even shade Including cleaning the

surface of all dirt, dust and other foreign matter.

29 Providng and applying two coats of acrylic lappy 148.00 One 171.52

(putty) with Celling painting (Three coats) with Sqm

plastic emulsion paint of paint of approved brand and

manufacture on Ceilling surfaces to give an even

shade Including thoroughly brushing the surface free

from mortar droppings and other foreign matter and

sand papered smooth

30 Providng and applying two coats of acrylic lappy 357.00 One 165.99

(putty) with Wall painting (Three coats) with plastic Sqm

emulsion paint of paint of approved brand and

manufacture on wall surfaces to give an even shade

Including thoroughly brushing the surface free from

mortar droppings and other foreign matter and sand

31 Providing and fixing 90 Cm high Stainless steel railing 15.00 One 3909.40

made from anticorrocive 304 grade S S pipe of 50 mm Rmt.

dia (16Gauge) as hand rall with 5 S 304 grade Baluster

of 32 mm dia vertical support fixed in RCC slab

including Four horizontal S S pipes of 16 mm dia at

Equal distance including Fastner & Fixtuner As

Directed And Approved By Engineer Incharge Etc.

32 Providing and fixing Stainless steel Hand ralling 12.00 One 1851.71

made from anticorrocive 304 grade SS pipe of 50 mm Rmt.

dia (16Gauge) Vertical Support fixed in RCC slab

including Fastner & Fixtuner As Directed And

Approved By Engineer Incharge Etc. Comp

33 Providing And Fixing Acrylic Braille Signage Plate 5.00 One 808.00

Including Visible Necessary Indicative Object And No

Text Etc. Comp. As Directed And Approved By

Engineer in Charge

34 Providing and fixing water closet squatting Pan 1.00 One 983.80

(IndiantypeW.C.Pan) size 580 mm (Earthwork, No

bedconcrete, foot reste and trap to be measured and

paid for separately) (A) Vitreous China. (1)

Longpattern Whitecolour

35 Providing and fixing wash down water closet 1.00 One 1648.15

(european type W C pan) with integral P and S trap No

including jointing the trap with soil pipe în cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down W C with

CP brass hinges and rubber buffers back plastic seat

and including flush bend Including cutting holes in

walls and making good the same connecting the flush

bend with cistern and closet vitreous china

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

36 Providing and fixing wash basin with single hole for 2.00 One 1863.43

pillar tap with C.I. Or M.S. brackers painted white No

Including cutting holes and making good the same

including providing and fixing CP. brass waste

mm dla. and M.I. fisher unioh 40 mm dla. etc.

complete Vitreous China Flat back wash basin 550mm

x 400mm size in white colour

37 Providing and fixing Urinal or approved quality 1.00 One 1074.86

Including conecting the Urinal with waste pipe, tap No

etc. complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm

38 Providing and fixing 18 To 20 mm thick marble 1.00 One 1057.10

partition including fixing in position in white cement Sqm

and making the wall good including rubbing and

polishing etc. complete as directed.

39 Providing and fixing C.P. brass towel rail complete 5.00 One 616.42

with C.P. Brass brackets fixed to wooden plugs with No

C.P. Briss screws, (B) 600mm x 20 mm size.

40 Providing and fixing 600 mm X 450 mm Bevelled edge 3.00 One 859.41

mirror of superior glass mounted on 6mm thick A.C. No

sheet or plywood sheet & fixed to wooden plugs with

C.P.brass screws and washers.

41 Providing laying and jointing in true line and level 48.00 One 148.12

40mm dia, U.P.V.C. Pipe (SCH 40) for cold water Rmt.

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials

42 Providing and fixing S.W. gully trap with C.I. grating 2.00 One 1246.92

brick masonary chamber and water tight C.I. cover No

with frame of 300 mm x 300 mm size (Inside) with

standard weight (1) Square mouth traps (B) 150 mm x

100 mm size P of R type

43 Providing and fixing gun metal check or non return 2.00 One 663.43

fullway wheel valve (E) 40 mm dia. No

44 Providing and fixing gun metal check or non return 2.00 One 420.63

fullway wheel valve (C) 25 mm dia No

45 Providing and fixing gun metal check or non return 2.00 One 186.83

fullway wheel valve (A) 15 mmdia: No

46 Providing and fixing chromium plated brass half turn 2.00 One 263.77

flush cock of approved quality including fixing in No

pipe line etc. complete. (ii) 25 mm. Dia

47 Providing and fixing pillar tap, capstan head, screw 3.00 One 308.73

down high pressure with screws shanks and back No

nuts (A) 15 mm Dia.

48 Providing and fixing in position PVC cowel vent to 2.00 One 393.04

pipes 75mm dia No

49 Providing and fixing in position PVC cowel vent to 2.00 One 505.17

pipes 100mm dia No

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

50 Excavation for foundation upto 1.5 m depth including 345.00 One 157.16

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

51 Excavation for foundation upto 1.5 m depth including 102.00 One 268.92

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

52 Excavation for foundation upto 1.5 m depth including 165.00 One 276.24

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(D) Soft rock not requiring Blasting

53 Excavation for foundation upto 1.5 -3.0 m depth 8.00 One 300.02

including sorting out and stacking of useful materials Cum

and disposing off the excavated stuff upto 50 Meter

lead.(D) Soft rock not requiring Blasting

54 Providing and laying cement concrete 1:4:8 (1- 132.00 One 2769.69

Cement : 4- coarse sand : 8- hand broken stone Cum

ggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

55 Providing and laying cement concrete 1:3:6 (1- 25.80 One 4152.60

Cement : 3- Coarse sand : 6- crushed stone aggregates Cum

20 mm nominal size) and curing complete including

cost of formwork in (A)Wall Caps / Coping

56 Providing and laying ordinary cement concrete 1:2:4 13.20 One 8518.15

(1- Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) for R.C.C lintel including

finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of

57 Providing TMT Bar FE 415 reinforcement for R.C.C. 19.777 One 68326.50

work including bending, binding and placing in MT

position complete upto floor two level

58 Filling in plinth with sand under floors including 115.38 One 481.80

watering ramming, consolidating and dressing Cum

59 Filling in foundation and plinth with murrum or 331.00 One 301.78

selected soil in layers of 20cm. Thickness including Cum

watering, ramming and consolidating etc. complete.

60 Providing and laying cement concrete 1:2:4 (1- 7.20 One 6693.29

Cement : 2- Coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) for reinforced concrete Chhajjas

not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement

mortar 1:3 (1-cement, 3 Fine sand) to give a smooth

and even surface centering and formwork and curing

complete excluding cost of reinforcement.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

61 Providing and laying ordinary cement concrete 1:2:4 53.40 One 10469.21

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth

with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for

R.C.C work in (B) COLUMNS: (ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

62 Providing and laying ordinary cement concrete 1:2:4 11.28 One 7665.60

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth

with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for

R.C.C work in (A) BEAMS :(ii) Having crosssectional

area more than 0.08Sq.M and upto 0.12 Sq.M

63 Providing and Laying ordinary cement concrete 1:2:4 79.50 One 6898.83

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) exposed work and finishing

smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for

R.C.C work in (iii) Slabs having more than 10 cm and

upto 13 cm. thickness

64 Providing & laying ordinary C.C. 1:2:4 (1 cement: 2 8.40 One 6858.71

coarse sand: 4 graded stone aggregate of 20 mm Cum

nominal size) and finishing smoothe with curing etc.

Complete including cost of form work but excluding

cost of reinforcement. for R.C.C. work in (E) Staircase.

65 White Stone Bela mesonry block in course in 525.64 One 6361.90

superstructure with stone of approved quality in Cum

Cement / Lime Mortar 1:5 (1- Cement :5- course sand)

including packing the joints etc. complete.

66 White Stone Bela mesonry block in course in 291.00 One 6479.69

superstructure with stone of approved quality in Lime Cum

Mortar 1:6 (1-Cement : 6- course sand) including

packing the joints etc. complete.

67 Providing and Fixing Machine cut, free edges, 147.42 One 2454.70

machine polished Granite stone slab 18 mm thick for Sqm

Doors/Windows Cill and Jambs cladding as per

design including edge finished and 1 cm nosing and

laid on 10 mm thick cement mortar 1:3 ( 1 cement:3

coarse sand) jointed with grey cement slurry

including rubbing and polishing finishing etc

68 20mm thick sand faced cement plaster on walls upto 1418.40 One 342.41

height 10 metres above ground level consisting of Sqm

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

69 Providing 15mm thick cement plaster in single coat on 2324.40 One 195.42

Rough (Similar)side of single or half brick walls for Sqm

interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-

70 P & L 24" x 24" vitrified 8 mm thick tile flooring over 568.80 One 1264.41

20 mm (average) base of cement mortar 1:6 ( 1 cement: Sqm

6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

71 Providing and laying white glazed tiles 6mm thick 70.40 One 868.55

inflooring treads of steps and landing laid on a bed of Sqm

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

72 Providing and laying white glazed tiles 6mm thick 103.80 One 1127.48

inskrting risers of steps and dedo on 10mm thick Sqm

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

73 Providing and fixing wash down water closet 6.00 One 1356.81

(European type, W.C. Pan) with integral P or S trap No

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to

be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

74 Providing and fixing PVC SWR Nahni trap IS 14735 17.00 One 586.27

for drain - 100 mm diameter with jali of the following No

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

75 Constructing brick masonry chamber for 16.00 One 2932.93

underground C.I. Inspection chamber and bends with No

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx610mm and 450mm deep

for single pipe line.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

76 Providing and fixing washbasin with single hole for 6.00 One 1684.95

pillar tap with C.I. or M.S. brackets painted white No

including cutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white

77 Providing and fixing standared extruded of 6.80 One 1175.56

alluminium section of size 63mm x 38.10mm x 1.2mm Sqm

@ Wt. 0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5mm thick frosted glass as

details etc complete for Ventilation

78 Providing laying and jointing in true line and level 126.00 One 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Rmt

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

79 Providing laying and jointing in true line and level 84.00 One 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Rmt

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

80 Providing and fixing screw down bib taps of 17.00 One 186.83

following size.(A) Brass screw down bib tap polished No

bright. (i) 15mm dia.

81 Providing sock pit of 5.00 Cu.M. Volume including 6.00 One 3457.27

excavating and filling brickbats with dry masonry No

work at top for 45cm. height including covering the

top with stone including providing vatas in C.M. 1:3

with finishing curing etc. complete as directed.

82 Providing BB Masonry Septic Tank Inside 3.0 mX 1.00 6.00 One 28978.22

X1.20m Including Excavation BBCC 1:5:10 Concrete at No

bed, 0.23mm thick BB masonry wall in Cm 1.6 all

round, 0.115 mt thick two partition wall set equal

distance in cm 1:4 cement plaster CM 1:3 RCC top slab

of CC 1:2:4 (0.10mm thick) two Nos. of CI cover of

0.60 X 0.45m size having weight not less than 35kg

curing finishing etc comp

83 Providing erecting and fixing double coated Syntex 8000.00 One 3.95

PVC (ISI) water tank of required capacity each with all Ltr

necessary fittings and connection etc. complete on

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

84 Providing and fixing M.S. grills of required pattern to 1692.00 One 123.42

frames of windows etc. with M.S. flats at required Kg

spacings and frame alround, square or round bars

with round headed bolts and nuts or by

screws.including a coat of priming & two coats of oil

85 Providing and fixing 20cm X 15cm X 2.5 cm thick year 6.00 One 279.69

plate of marble stone set in C.M. 1:4 including No

finishing and engraving letters etc. complete

86 Providing and fixing window having extruded 91.60 One 1713.70

aluminum Colour anodized section frame main outer Sqm

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

87 Providing and laying broken chine mosaic flooring for 813.84 One 779.70

terrace using 12 mm to 20 mm broken pieces of glazed Sqm

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

88 Providing and fixing stainless steel railing for ramp 54.00 One 2559.85

having one side two hand rail 90cm height and of 32 Rmt

mm dia and baluster 25 mm dia at 60cm C/C and

horizontal pipe of 20 mm dia. as per design and SS

having 304 grade including astening, hold fast,

clumps coach bolts etc. comp. and other side two

hand rail of 32 mm dia fixed on wall using 25 mm dia

supports at 60cm C/C as per design and SS having

304 grade and 18 gauge pipe including astening, hold

fast, clumps coach bolts etc. comp as directed by

engineer in charge

89 Providing and fixing stainless steel railing (modular 54.00 One 2057.07

type) having hand rail 90cm height and of 50mm dia Rmt

and baluster 32mm dia at 90cm C/C and 3 horizontal

pipe of 20 mm dia. At required spacing as per design

and SS having 304 grade and including astening, hold

fast, clumps coach bolts etc. comp

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

90 Providing and fixing 35mm thick factory made 58.80 One 2152.31

moulded door shuter consisting of solid core single Sqm

leaf flush door of 30mm thickness, lipped with 15mm

(5mm x 3) thick x 30mm width on one stiles and top

rail and 10mm (5mm x 2) thick x 30mm width on the

other stiles and bottom rails. The inner panel

laminated with 2mm thick termite proof, water proof

and fire resistant moulded PVC sheet with 2,4,6 raised

panel design in different plain and /or prelim colours

on one side after routing the moulded design on flush

door and 2mm plain and/or prelim PVC sheet on

other side using rubber adhesive on flush door and

solvent cement adhesive on the PVC liping etc.

complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

91 Finishing wall with weather proof exterior emulsion 1784.40 One 120.26

paint on wall surface (two coats) to give an required Sqm

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

92 Distempeing (Two coats) with oil bound distemper of 2324.40 One 75.68

approved brand and manufacture and of required Sqm

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer

of approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

93 Providing and fixing to wall ceiling and floor 10.0 Kg. 174.00 One 339.05

F/Cm2 working pressure poluthene pipes of the Rmt

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

94 Providing and fixing to wall ceiling and floor 10.0 Kg. 72.00 One 280.23

F/Cm2 working pressure polythene pipes of the Rmt

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F)

95 Providing and fixing S.W. gully trap with C.I. grating 6.00 One 1292.19

brick masonry chamber and water tight C.I. cover No.

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type

96 Providing and fixing Urinal of approved quality 6.00 One 1631.88

including connection with trap and with integral No

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

97 Providing and fixing C.I. Manhole cover 0.60 M. x 3.00 One 958.17

0.45M. size having weight not less than 35Kg No

98 Filling in foundation and plinth with brick Bats 4.50 One 621.46

Chhara in layers of 20cm. thickness including Cum

watering, remming and consolidating eto. Complete

One Crore Forty Nine Lakh Eighty Five Thouasand Six Hundred Eighteeen Rupees And Fifty

I \ We am \ are willing to carry out the work at ……………………… % above \ below percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division

Junagadh-1 Junagadh