CA NO.CWE BLY/GE (W)/151 OF 2025- 2026 REPAIR/ MAINTENANCE/ MAINT OF INTERNAL WIRING WITH SUB MAIN WIRING, DBS AND EARTHING OF MD ACCN UNDER GE WEST BAREILLY

Taking down carefully existing Aluminum/ copper point wiring (light/ Fan/ Socket/ Power Point) complete fittings etc and making good to disturbed surface of wall/ Floor etc to match the existing surface/ finishes complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm (Nominal area) PVC insulated, unsheathed, multi stranded Copper conductor cable drawn in and including PVC rigid PVC conduit 25mm or higher size with all its fittngs and accessories for one 3 pin/6 pin 15 Amps socket out let point independent alongwith PVC insulated cable with multistranded copper conductor 1.5 Sqmm (nominal area) continuous earth wire, and connected to earth dolly including fixing of 1.20 mm sunk pressed steel terminal box/ MS modular box suitably flushed to wall with 3mm thick Hylum sheet cover/ white colour modular plate with cover for housing switch, socket regulator etc fixed with screws & cup washers incl. making good complete. (a) One light/fan point controlled by one switch 5/6 Amp one way complete all as specified and directed.

(b) All as per item no.2 here in before but for socket outlet 3/5 pin 5 amp. on the same board complete all as specified and directed.

(c ) All as per item No 02 here-in-before but for 5 Amps 3/5 Pin point on independent board complete all as specified and directed.

(d) All as per per item No 02 here-in-before but for one light point controlled by two Nos of 2 way switches complete all as specified and directed.

All as per item No. 2 above but wiring with 2.5 Sqmm (Nominal area) PVC insulated, unsheathed, multi stranded Copper conductor cable drawn in and including PVC rigid PVC conduit 25mm or higher size with all its fittngs and accessories for one 3 pin/6 pin 15 Amps socket out let point independent alongwith PVC insulated cable with multistranded copper conductor 2.5 Sqmm (nominal area) continuous earth wire, and connected to earth dolly including fixing of 1.20 mm sunk pressed steel terminal box/ MS modular boxe suitably flushed to wall with 3mm thick Hylum sheet cover/ white colour modular plate for housing switch, socket regulator etc fixed with screws & cup washers incl. making good complete.

S&F Piano type switch flush type 5/6 Amp SP one way complete all as specified and directed.

S&F Piano type switch flush type 5/6 Amp SP two way complete all as specified and directed.

S&F socket outlet ,3/5 pin 6 amp flush type complete all as specified and directed.

S&F Piano type switch flush type 15/16 Amp SP one way complete all as specified and directed.

S&F socket outlet 2 in one, 3/5 pin 6 and 16 Amp flush type complete all as specified and directed.

S&F in repairs switch flush type 5/6 Amp SP one way complete all as specified and directed.

S&F in repairs switch flush type 5/6 Amp SP two way complete all as specified and directed.

S&F in repairs switch flush type 15/16 Amp SP one way complete all as specified and directed.

S&F in repairs ceiling rose 2/3 terminals complete all as specified and directed.

S&F in repairs lamp holder PVC Angular/ pendent/ bakelite complete all as specified and directed.

S&F in repairs Switch socket combination 2 in one 6 and 16 Amp flush type complete all as specified and directed.

S&F in repairs buzzer, capton ding dong, AC, 230V, sigle pole complete all as specified and directed.

S&F in repairs bell push switch flush type, complete all as specified and directed.

S&F in repairs socket outlet ,3/5 pin 6 amp flush type complete all as specified and directed.

S&F in repairs socket outlet 2 in one, 3/5 pin 6 and 16 Amp flush type complete all as specified and directed.

S&F in repairs Modular switches 1 way, 6 A, 1 module complete all as specified and directed.

S&F in repairs Modular switches 1 way, 16 A, 1 module complete all as specified and directed.

S&F in repairs Modular sockets 6 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs Modular sockets 6 A/16 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs Modular fan regulators step type, 120 W, 2 module complete all as specified and directed.

S&F in repairs White cover plate with frame, 2 module complete all as specified and directed.

S&F in repairs White cover plate with frame, 3 module complete all as specified and directed.

S&F in repairs White cover plate with frame, 4 module complete all as specified and directed.

S&F in repairs White cover plate with frame, 8 module complete all as specified and directed.

S&F in repairs White cover plate with frame,10 module complete all as specified and directed.

S&F in repairs White cover plate with frame,12 module complete all as specified and directed.

S&F in repairs modular metal flush box, 1/2 module complete all as specified and directed.

S&F in repairs modular metal flush box, 3 module complete all as specified and directed.

S&F in repairs modular metal flush box, 4 module complete all as specified and directed.

S&F in repairs modular metal flush box, 6 module complete all as specified and directed.

S&F in repairs fan regulator resistance/electronic step piano type single phase 230 volt.

S&F in repairs Hylem sheet 3mm thick of size 9'' X 11'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in repairs MCB SPN 32 to 40 Amps 240 volts.10kA, comnplete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240 volts, 10 kA, complete all as specified and directed.

S&F in repairs MCB TPN 63 Amps,415V,10kA, complete all as specified and directed.

S &F in repair MCCB 16 kA,125Amp thermal magnetic and electronic earth leakage module complete all as specified and directed.

Taking down unserviceable existing sub main wiring with aluminium conductor stranded cable upto 6 Sqmm single core including earth wire from existing conduit or wooden battens including taking out unserviceable wooden gutties etc, matching with the existing surfaces complete all as specified and as directed. .

S&F sub main wiring with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete.(Note : PVC conduit and its accessories including 2 runs of cable 4 sq mm & 1 run of earth continuity conductor cable 4 sq mm unsheathed shall be measured and paid as single unit).

S&F sub main wiring with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable 6 sq mm & 1 run of earth continuity conductor cable 6 sq mm unsheathed shall be measured and paid as single unit).

S&F sub main wiring with two single core cable PVC insulated cable with 10 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 10 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 45 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable 10 sq mm & 1 run of earth continuity conductor cable 10 sq mm unsheathed shall be measured and paid as single unit).

S&F sub main wiring with two single core cable PVC insulated cable with 16.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 16.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of adequate sizeof medium grade size incl. making good the disturbed surfaces complete. (Note : PVC conduit and its accessories including 4 runs of cable 16 sq mm & 1 run of earth continuity conductor cable 16 sq mm unsheathed shall be measured and paid as single unit).

S & F Sub main wiring with four single core cable PVC insulated cable with 10 Sq mm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts grade incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 10 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of adequate size of medium grade size incl. making good the disturbed surfaces complete. (Note : PVC conduit and its accessories including 4 runs of cable 10 sq mm & 1 run of earth continuity conductor cable 10 sq mm unsheathed shall be measured and paid as single unit).

S&F sub main wiring with four single core cable PVC insulated cable with 16 Sq mm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts grade incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 16 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of adequate size of medium grade size incl. making good the disturbed surfaces complete. (Note : PVC conduit and its accessories including 4 runs of cable 16 sq mm & 1 run of earth continuity conductor cable 16 sq mm unsheathed shall be measured and paid as single unit).

S&F in repairs vertical loadline sheet metal enclosure double door, triple pole and neutral AC, 415 volts, 08 way, with 200 Amps rated copper busbar and IP- 54 & K 09 protection with the inbuilt provision for fixing of 1 No MCCB 160 Amps capacity and 24 Nos MCBs inside of DB, with metal door and flush to wall incl grounting and cutting in existing wall and making good disturbed surface with two coats of white/colour washing / distempering etc to match the existing complete all as specified and directed.

S&F in repairs vertical loadline sheet metal enclosure double door , triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper busbar and IP- 54 & K 09 protection with the inbuilt provision for fixing of 1 No MCCB 125 Amps capacity and 12 Nos MCBs inside of DB , with metal door and flush to wall incl grounding and cutting in existing wall and making good disturbed surface with two coats of white/ colour washing/ distempering etc to match the existing complete all as specified and directed.

S&F in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

S&F in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

S&F in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 20 watt 4 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 10 watt 2 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed.

S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and taking down of Old unsv Panels of any type complete all as specified and directed.

S&F in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25 mm size with accessories including dismentaling/takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed

S&F in repairs in replacement PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm, 1100 V grade complete all as specified and directed.

M&L in repairs earthing complete in replacement with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified including testing after completion complete all as specified and directed.

S&F in repair LED post top luminiare, 40 watt, with die cast amuninium spigot, spun aluminium powder coated top cover, with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver incl taking down existing luminaire complete all as specified an directed. Make : EVEREADY Cat Pt No : LEDPOST040I5-02 / BAJAJ Cat Pt No : BGCTNP 40W LED WH / CROMPTON Cat Pt No : CBP-610-4057-SL-CA-NBK NOTE: Wire for conection of luminaire shall be measured and paid seperately.

S&F in repairs LED Bollard light 9/10 watt, with aluminium extrusion for sturdiness and better finish, UV stabilized injection moulded opal polycarbonate diffuser for spot free lighting and IP 65 grade protection, operating voltage 120-280V, with integrated constant current electronic driver incl all fittings and fixtures complete with PCC work incl taking down existing luminaire complete all as specified and directed. Make : EVEREADY Cat Pt No : LEDBLB010I5-01 / BAJAJ Cat Pt No : BGBOL 605 9W LED WH/CROMPTON Cat Pt No : LBLA1-10-CDL

S &F in replair of LED bulk head 10 watt capacity made with injection moulded polycarbonate material and UV stabilised opal acrylic for smooth and spotless lighting, highly durable, IP 65 deegree of protection, impact resistamnce ik - 08incl all connection complete all as specified and directed by Engr-in-Charge. Make : EVEREADY Cat Pt No : LEDBK010I5-02 / BAJAJ Cat Pt No : BIBWP 10W LED/CROMPTON Cat Pt No : LBHP-10-CDL

S&F replacement PVC insulated unarmoured & PVC sheathed copper cable 3 core of cross sectional area 1.5 Sq mm for providing necessary electrical connection from street light junction box to light fittings drawn through existing Steel tubular pole with necessary arrangement of welding/cutting etc including with suitable size copper lugs complete all as specified and directed.

S&F in repair 6 sqmm twin core1100 Volts grade heavy duty cable, flat or circular PVC insulated aluminium solid conductor served with inner sheathing of PVC tapes and overall PVC sheathed in service connection from pole to Main Switch complete all as specified and directed.

S&F in repair 10 sqmm twin core1100 Volts grade heavy duty cable, flat or circular PVC insulated aluminium solid conductor served with inner sheathing of PVC tapes and overall PVC sheathed in service connection from pole to Main Switch complete all as specified and directed.

S&F in repiars LED Strip light 5 watt, 50 Meter long, 6500 K, warm white/cool day, IP 65, 100 lumen per watt, 120 -300 Volt, 50 Hz including electronic driver as per site requirement complete all as specified and directed.

S&F cable Junction box of size 155 mm x 210 mm x 92 mm weather proof, IP 65 for outdoor installation including 05 Nos terminals fixing on wall with suitable size anchor bolt etc. with MCB SP, 6 Amps, 240 volts, 50 Hz - 01 No. complete all as specified and directed.

Taking down ceiling fans 1200/1400 mm sweep & removing/cleaning of dust properly, oiling and replace of bearing, rubber seal, condensor 2.5 mfd, bush, shaft etc. and painting of existing ceiling fan and re-fixing and connecting up with flexible wire complete all as specified and directed.

Taking down exhaust fans 300/380/450 mm sweep & removing/cleaning of dust properly, oiling and replace of bearing, condensor 3.15 mfd, bush, shaft etc. and painting of existing exhaust fan and re-fixing and connecting up with flexible wire complete all as specified and directed.

S&F in repairs fan down rod made out of 15 mm dia medium grade GI pipe, Med grade including threading on both end of pipe, drilling holes etc. as required including primer complete all as specified and directed.

Please Enable Macros to View BoQ information