REPAIRS POLISHING/PAINTING TO WOODEN AND STEEL FURNITURE AT UNIT 524 AT MISA CAMP UNDER GE (S) TEZPUR

Amount

Chair Easy SINGLE SEATER AND 03 SEATER(MAP/TP) -Removing of the following old broken/Unserviceable parts from chair Easy and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Removal of damaged/US seat of single seater and S&F of new seat (12 mm ply of green wood/century etc )with branded cover with 3'' cushion of 32 density, cost of each meter of cover should not be less than 350.00 and seat to be fitted in bottom as per original design and rest all as per Eng-in-Charge.

Back but same as in 2.0 and fitted with frame to give original looks of single seater

Side but same as in 2.0 and fitted within frame to give original looks of single seater

Front leg

Rear leg

Front rail of seat frame single seater

Rear rail of seat Frame of single seater

Side rail of seat frame of single seater

Upper Rail of back frame of single seater

Seat of 03 seater as same as 2.0 but 12mm ply

Back of 03 seater but same as 2.0 but 12mm ply

Front long rail of 3 seater

Rear rail of 3 seater

Rear upper rail of 3 seater

Table Dressing with Mirror 900x375x1600 mm-TP- Removing of the following old broken/Unserviceable parts from Table Dressing Gents with Mirror and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable mirror from Table Dressing Gents with Mirror and Supply and FixingNew 5 mm thick mirror of Make : Atul/Modigaurd with New Teak wood frame & 6mm thick plywood commercial type at back as per drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable hanging clip from Table Dressing Gents with Mirror and Supply and Fixing New new hanging clip of best quality to hold the load of dressing mirror as per drg and directed by Engineer-in-charge.

Removing of the old broken/Unserviceable back ply from Table Dressing Gents with Mirror and Supply and FixingNew 6mm thick back ply, BWR Gde Plywood or as per drg to give original shape to the dressing Mirror.

Table Centre FD-29,235 & 274- Removing of the following old broken/Unserviceable parts from Table Centre and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top table center and S & F New Top of table centre made out of 18mm thick prelaminated MDF board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top complete,including tightening of frame with bamboo pins,screw wood ss before fixing of top. all as shown in drg and directed by Engr-in-Charge Make- Eco board/Archid/Bhutan Board Green Ply

Short rail.

Long rail.

Stiffener centre and side

Corner

Table Peg -FD-46,236 & 277- Removing of the following old broken/Unserviceable parts from Table Peg and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top from table peg and Supply and Fixing New Top of table centre made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polished all round the top,including tightening of frame with bamboo pins,screw wood as before fixing of Top. Complete all as shown in drg and directed by Engr-in-Charge.

Short rail.

Long rail.

S&F Corrner of 50x50x25mm

Table Dining 6/8 Pers FD-46,236 & 277- Removing of the following old broken/Unserviceable parts from Table Dining 6/8 Pers and Supply and Fixing new parts made out of Ist class hard wood Teak well seasoned made to shape and size as per drg duly polished complet all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of the old broken/Unserviceable top from Table Dining 6/8 per and S and F New Top of Table dining 6/8 pers made out of 18mm thick prelaminated particle board exterior grade both side laminated and providing with 4 mm thick teak wood beading duly polushed all round the top ,including tightening of frame with bamboo pins,screw wood ss before fixing of top.Complete all as shown in drg and directed by Engr-in-Charge.

Long rail.

Short rail.

S& F Corrner of 100x100x25mm

Chair Varandah (TP)

Scrubbing of old paint of seat & Back and all part of the the chair varandah Trade Pattern, applying of white paint over the red oxide to give the finish of original look and as directed by the Engr-in-charge.

M&L for welding of broken frame of chair verandah as and where required as specified and directed by Engr-in-charge

S&F new PVC hard shoes.

Table Office Officer steel (FD-1003)

Removing old u/s top of table office officer steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table Office Offrs Steel as specified in drg and as directed by Engr-in-Charge.

S&F new PVC legs shoes of best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge.

Table Steel 3'X2' with &w/o drawer (FD-1007 & 1008)

Taking out old U/S existing top from Table Steel 3'X2' with &w/o drawer and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table 3'x2' steel with drawer and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table 3'x2' Steel as specified in drg and as directed by Engr-in-Charge.

S&F new branded shoes of Table Steel 3'X2' with &w/o drawer and S&F of new PVC legs shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge

Chair CB Steel with Arms & W/O Arms (FD-75)

S&F new seats of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken seat all as specified and as shown on drg.

S&F new back of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken back all as specified and as shown on drg.

S&F new mild steel cleats of size 50 X 25 X3mm in Absence of old U/S cleats by welding/screwing or as per directive by Engr-in charge to the frame complete of Chair CB steel with Arms duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint all as specified and as directed by Engr-in-Charge

S&F new PVC cap for chair steel tumbler with arms.

S&F of new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge

Removing of old U/S arms and S&F new arms seasoned teak wood duly painted with steel screw appropriate size complete of Chair CB steel with Arms as specified and shown on drg all as directed by Engr-in-Charge

Teapoy Varandah (FD-255 & FD/E6/MAP/17) Taking out old U/S top of teapoy varandah and S& F New Top made of 16/18mm thick block board with lamination sheet of teak veneered shade both side laminated (one side white laminated) and 4mm thick teak wood beeding al round the top duly polished (Make Navopan/Century/Archid/Bhutan Board) and repairing the entire frame including welding if required and painting two coats of white enamel paint after preparation of surface as specified in drg and directed by Engr-in-Charge

TABLE BED SIDE MAP (FD/E6/MAP/15) Supply & fixing in replacement of unsv top made out of 18/19mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade exterier grade, 6mm beading all round the top of table bed side MAP using 1st class seasoned hard wood Sheesham including dismantling of unsv components all as specified and shown on drg.

All as per Ser item No.64.00 here-in-before but replacement of unsv side wall made out of 18/19 mm thick prelaminated particle board of teakwood shade , 6 mm teak wood beading all round the sides

All as per Ser item No. 64.00 here-in-before but replacement of unsv rear wall of 6mm plywood and polishing complete all as per drg

All as per Ser item No. 64.00 here-in-before but replacement of front part of bottom drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. 64.00 here-in-before but replacement of front part of upper drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. 64.00 here-in-before but replacement Telescopic Channel of 1 mm thick complete as per drawing

All as per Ser item No. 64.00 here-in-before but replacement Telescopic CP Handle complete as per drawing

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/07 and TP)

Supply & fixing 18 mm thick pre laminated particle board top (Make- Novapan, wintuff, Action Tessa) including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to . as in replacement of chiar school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as directed by Engineer-in-Charge.

All as per Ser item No. 72.0 here-in-before but Replacement of moulded one piece PVC back and seat , Make- Ballowal/ Blowplast

Preparation of old steel surface of chair school with hand board and applying one coat of black Japan paint complete all as specified and shown on drawing

Table Computer (FD/E6/MAP/03 and TP)

M/L for removing UNSV top and S&F top made out of prelaminated particle board 19mm exterior grade of approved make beaded with PVC edging as per drg and specification and as directed by Engr-in-charge.

S&F drawer with telescopic channel.

S&F sliding board with telescopic channel.

S&F sides.

S&F PVC shoes.

Almira large steel/Med steel with shelves &1/2h &1/2s Trade patter Godrej

Taking out existing unserviceable locks almirah large/medium steel and S&F of new locks of six leavers of existing shape & size with duplicate keys of Make : Godrej /Harrison complete all as specified and directed.

Taking out broken/damaged handle of steel almirah and S&F of new handle of mild steel chromium plated of existing shape complete all as specified and directed.

Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item 84 here in before but shelves of almirah medium steel

Taking out old unserviceabledoor hinges from almirah large/medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable cover locks from almirah large/medium steel and S&F of new cover locks made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

Taking down unserviceable three way locking device & rod set from almirah large steel and S&F of new three way locking device & rod set of existing shape and size complete all as specified on drawing and directed.

All as per item 88 here in before but three way locking device & rod set of almirah medium steel

Dismantling of unserviceable legs of almirah large steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item 90 here in before but legs of almirah medium steel.

Locker Steel (FD-1029, 257/ similar pattern/Trade pattern): Removal of following existing unserviceable components of Locker Steel or similar MES pattern or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including welding ,providing hinges, placing every part in-tactduly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint to the disturbed portion, as applicable as per drgs or as directed by Engr in Charge.

Handle

Hasp & Staple

Shelf

CP Hanging rod 19mm dia

Chair computer (TP)

Taking out old UNSV seat and S&F New seat as per Drawing

Taking out old UNSV back and S& F New back as per Drawing

Taking out old UNSV Arms and S&F New Arms as per Drawing

Taking out old unsv Hydrolick system and S & F New Hydrolick systeam as per drg.

Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing

Dining Chair MS Pipe (TP)

Removing of old seat with cover and fixing of new seat with cover the cushion of seat should be density of 32 and cloth of seat should be more than Rs. 350 per meter with superior quality. All the material used for S&F to be carried out to give original shape and as per direction of engr-in-Charge.

Removing of old back with cover and fixing of new new back as earier and density of back cushion should be 32 and cloth of seat should be more than Rs. 350 per meter with superior quality. All the material for S&F to be carried out to give original shape and as per direction of engr-in-Charge.

Rubbing/scrubbing of old paint and removal of rust and apply of two coat of paint over the red oxide primer and give the look of original chair.

S&F of shoes as required

Charpoy GI Pipe: (FD-220)

Removing of old unserviceable elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade ISI marked to charpoy GI pipe complete all as specified and directed Make-Jolly / RI / RM /KI//ISI marked

Removing of old unserviceable check nut from charpoy GI pipe and S&F new GI check nut 32 mm dia 10mm thick to long/ short rail of charpoy GI pipe complete all as specified and directed

S&F in replacement of U/S long rail of charpoy GI Pipe 32mm dia medium grade heavy duty threaded on both ends all as specified and shown on drg and as directed by Engr-in-Charge Make Jindel/Tata/Prakash Surya

Cutting of dismantled old long rail of charpoy GI Pipe 32mm dia modifying into short rail by threaded both ends and ends fixing the same to charpoy GI pipe all as pecified and as directed by the Engr-in-Charge.

Cutting of dismantled old short rail of charpoy GI Pipe 32mm dia and modifying into legs by threading of ends and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed by the Engr-in-Charges.

S&F new three in Nos Iran flate size 3'x2''x6mm long to be fixed by drilling on Flate Iron and three whole on each long rail alongwith ply over it and crewed with nut and bolt duly black painted over a coat of red oxide steel primer for fixing by 6 mm dia 1 ½” long bolt of flat head with nut and washer as directive by directed by Engr-in-Charge and two whole on each short rail to give strenthen and screwed the ply with nut and washer and as directed by eng -in-charge. Removal of Niwar and S&F new ply wood 12mm commercial face BWR greade size 1980x900mm (Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Bar Stool Revoling

Removal of old seat and S&F of new seat of cushion density 32 and cover to be superior quality of branded company costing not less than Rs. 350 per meter and all essential items required to give the original shape and look of the Bar stool

Removal of old back cover and S & F of new back cover to bring the back in original state as per drg and as per direction of Eng-in-Charge

Removal of rust and old paint and applying of two coat of paint over the coat of red oxide and give high gloss and original look and rest all as per directive of the eingineer -in-charge.

Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge.

Sofa set 3 seater with 02 Single seater (Trade Pattern): Removing of the following old broken/Unserviceable parts from single seater and threee seater sofa and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge.

Removal of damaged/US seat of single seater and S&F of new seat (12 mm ply of green wood/century etc )with branded cover with 3'' cushion of 32 density, cost of each meter of cover should not be less than 350.00 and seat to be fitted in bottom and necessory changes of wooden part and other part to be carried out to bring the sofa in original state(ie long rail, short rail) as per design and rest all as per direction of Eng-in-Charge

Removal of damaged/US seat of 03 seater and S&F of new seat (12 mm ply of green wood/century etc )with branded cover with 4'' cushion of 32 density, cost of each meter of cover should not be less than 350.00 and seat to be fitted in bottom and necessory changes of wooden part and other part to be carried out to bring the sofa in original state as per design and rest all as per direction of Eng-in-Charge

Back but same as in 122 and fitted with frame to give original looks of single seater, Necessory wooden part to be change while fitting the back to bring the single seater in original state.

Back but same as in 122 and fitted with frame to give original looks of 3 seater, Necessory wooden part to be change while fitting the back to bring the single seater in original state.

Side but same as in 122 and fitted within frame to give original looks of single seater, necessory changes which bring the sofa in original state and giving it strenth and rest all as per Drg.

Side but same as in 122 and fitted within frame to give original looks of 3 seater and necessory changes which bring the sofa in original state and giving it strenth and rest all as per Drg.

Polishing M&L for preparation of old painting/polishing surfaces by scrubbing existing old polished surface with sand paper, cleaning all dust, filling & stop bore holes with pasty filter prepared by mixing plaster of paris water to a creamy consistence and adding raw in quantity required to obtain the desired colour to the base and to surface allow to been dried up and set aside for 24 hrs for the surfaces to harden rub the surface with sand paper it is thoroughly smooth and dried to receive a coat of acrylic wood finish polish complete all as specified and as directed at site. Make : Berger/Asian/Shalimar.

Chair dining (D-16,203,228 & 279)

Chair Easy ( FD-17,201 & 229)

Chair writing/CBA ( FD-20,202,250 & 280)

Table Center ( FD-29,235 & 274)

Table 3'x2' With/Without Drawer ( FD-41,224,231,283 & 284)

Table Peg ( -FD-46,236 & 277)

Table Writing Med,small ( FD-249 & 275 & DB-3902)

Table Dressing Ladies ( FD-32,251 & 378)

Table Dressing Gents (FD-31 & 230)

Table Bed Side (FD-28,248 & 276)

Stool dressing (FD-252)

Hat stand ( FD-206 & 233)

Table Dining 6/8 Pers

Painting M&L for preparation of old painting steel surfaces of any descripting exceeding 10cm width on girth inner side and outer side by cleaning with abrasive cloth, removing dirt, denting deparession if any, applying putty for smooth surfaces for painting and applying a coat of olive green / grey/black/white synthetic enamel paint on both side for glossy finish inside and outside complete all as specified and as directed at site.

Almirah Large Steel

Almirah Med Steel

Chair CB Steel with arms

Chair CB Steel without arms

Locker Steel

Rack steel 6 tier

Shoes racks

Table 3'x2' with or without dr steel

Table Office Clk Steel

Table Offie Offrs steelNote 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/s Singh Furniture Mart

Ms N D Enterpise

L.BHIMSEN