Urgent maintenance/renovation works of director bungalow including replacement of aluminium doors, windows, sanitary fittings, roof sheet and toilet modification works

Amount

Earth work in excavation in all kinds of soil.by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited layers by ramming and watering lead upto 1Km and lift upto 1.5m etc. complete.including conveying the earth upto 1KM

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) grade, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work in Thermo-Mechanically Treated bars of grade Fe-500D or more.including straightening, cutting, bending, placing in position and binding all complete upto plinth leve

Solid concrete block (75kg/cm2) masonry in cement mortar 1:6 using concrete brick of size 40x20x12cm upto plinth level including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished Granite of any colour and shade,(Area of slab upto 0.50 sqm) premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing IS : 12817 marked stainless steel butt hinges(75x47x1.80 mm )with stainless steel screws etc. complete :

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete :

Providing and fixing IS : 3564 aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing 100x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing 125 mm aluminium powder coated handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing 12 mm thick marine plywood gurjan or equvalent confirming to IS:710 for cupboards, shelves, partition, drawers, table top etc. including necessary screws etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Steel work in built up GI tubular TATA/Jindal or equvalent (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying rectified Antiskid Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles of size 600x600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete

Providing hip or valleys of 90 cm wide overall in powder coated GI sheet 0.6mm or nearest fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete

Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing (2 mm thick flat ) up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

Providing 150mm or nearest available size PVC rectangular gutter with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.

12mm cement plaster 1:3 (one cement: three coarse sand) finished with a floating coat of neat cement including cost and conveyance of all materials and labour charges etc. complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives on Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Finishing with Epoxy paint two or more coats on steel work at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.

French spirit polishing :Two or more coats on new works including a coat of wood filler and sanding sealer including all scraping and sand paper works with cost and conyance of materials,labour charges etc complete as per the instruction of engineer in charge

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: One coat

Wall painting with two coat premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre asper instruction of engineer in charge

Painting with synthetic enamel paint one or more coats on old work of approved brand and manufacture of required colour to give an even shade

Pointing (flush/ruled pointing) on stone work with cement mortar 1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials and labour charges etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Painting with two or more coats synthetic enamel paint on new work of approved brand and manufacture to give an even shade :

Demolishing brick/laterite work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter Of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking serviceable material in Engineering Unit store and other materials within 50 metres lead as per the instructions of Engineer-in-Charge

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling roofing including ridges,G.S. Sheet, hips, valleys and gutters etc., and stacking the material within 50 metres lead

Dismantling tile work in floors and roofs ( thickness of tiles 10 mm to 25 mm) laid in cement mortar including stacking serviceable material in Engineering Unit store and other materials within 50 metres lead as per the instructions of Engineer-in-Charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Providing and fixing white vitreous china pedestal type water closet suit model two in one (European type W.C. pan) with white solid plastic seat cover with manually controled device (air sucking type)i with all fittings and fixtures complete, including cutting and marking good the walls and floors wherever necessary including cost and conveyance of all materials and labour charges etc required as per instruction of officials

Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. low level flushing cistern (10 litre capacity - White) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Supplying and fixing Jaqur Queen Wall Mixer with Jaqur Queen telephonic shower (3 in 1) or equvalent quality of approved quality including all cost conveyance labour charges etc complete as per the instructions of the engineer

Supplying and fixing 600mm x 20mm brass towel rail and fixing to wall with wooden plug with CP brass screws including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 32 mm PVC pipes (1.25") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 110mm (4") PVC pipe (4kg/cm2) best quality Polyvinyl Chloride (CPVC) pipes, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (20 mm nominal outer dia Pipes), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing (1") Polyvinyl Chloride (PVC) pipes(10kg/cm2), and all specials best approved quality This includes jointing of pipes & fittings and PVC valves etc with neccessary solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing best quality C.P. brass health fauset (Cascade) etc. complete

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)(Glazing, paneling and das

Providing and fixing 4mm or nearest thick Aluminium composite panel (ACP) two side finish board in paneling fixed in aluminium doors, windows shutters and partitions frames with CP. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing metalic (SS 306,316 or equvalent) mosquito net of approved quality over aluminium frame work including cost and conveyance of all materialsand labour charges etc. complete but excludingcost of aluminium etc. complete

Providing and fixing 12mm or nearest thick multiwood particle board(solid sheet)( 6 dense) in paneling fixed in aluminium doors,windows,shutters and partitions frames with CP/brass syainless steel screws etc,complete as per acrchitectural drawing and direction of engineer in charge

Chipping and removing the damaged portion of R CC beams columns slabs etc. carefully without damaging the existing structure including removing the debries scrapping with emery paper/wire brush for removing the rusted portion from the reinforcement apply one coat of adhesive epoxy resine such as NETTO BOND EP including cost and conveyance of all materials and all labour charges etc. complete.

Providing Fibre lamination works to the RCC structure using resine fibre glass and chemicals after washing the surface roughly cleaned and dry fill in the cracks with suitable putty, first apply the resine to the surface well spread and pressing, applying a second layer of resin to smooth finish for forming the whole to a solid mass including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

HARISH KUMAR CP

PRAJEESH V K