WBPWD/EE/BED/e-NIQ-10/2025-26 2nd call

Amount

Supply & Fixing of LED Flood light luminaries of 250 watt new generation energy savings and environmental friendly and long life pressure diecast aluminum housing with Heat resistant toughened glass cover IP66 protection in built tilting arrangement roadway luminaries with high power LED, high power LED's with secondary optics with 10KV SPD Included. Latest accreditation of LM-79 and LM-80 reports to be provided from NABL accredited Lab, fittings must have BIS approved and Silicon filled Potted Vibration proof Driver with BIS registration with 5 yrs warranty and luminaries system Lumen output >= 30900, CRI >70, CCT 5500-6000K. with 5 years manufacturer warranty.(Make:- Wipro/Philips(Signify)/ Crompton / Bajaj as per direction by EIC)

Supply & Fixing of BIS approved new generation energr saving, environment friendly and long lasting heat resistant, IP-66 & IK10 rated 15O watt (maximum) LED street light luminaries with pressure diecast aluminum housing and Toughened Glass/PC cover provided with high power LEDs and secondary optics PCIPMMA lens and Silicon filled BIS registered Potted Vibration proof Driver with built in 4 KV surge protection and l0KV external SPD with EIficacy>135 lumen/watt, CRI >70, CCT > 5700K. Make:- Wipro,Voyage /Crompton, Falcon Pro I/ Bajaj Hexo J/PHILIPS Urban edge Plus ) Driver Mk.- Philips SigniS/Wipro / Xtanium / Inventronics. LED Chip mk.-Nichia,Cree,Osram, Lumiled. (As per choice of EIC)

Supply & Fixing of LED street light luminarie IP 66,made up of pressure die cast aluminium housing witJl Toughened glass/ PC cover provided with high power LEDs and secondary optics PC/PIvIMA lens and Silicon filled BIS registered Potted Vibration proof Driver with built in 4 KV surge protection and 1OKV extemal SPD with Efficacy>120 lumen/watt, CRI >70, CCT> 5700K. Make:- Wipro DOT/Crompton, Raptor Pro/ Bajaj,EDGE NXT LED/ PANASONIC BLOOM /Havells Endura SunDown/PHILIPS Urban edge PIus) Driver Mk.- Philips Signify/Wipro / Xitanium/ Inventronics. LED Chip mk.-Nichia,Cree,Osram, Lumiled. (As per choice of EIC) ---------120-130 watt

Supply and Fixing of special types 2 ft. dia. round Arm bracket with arrangement for fixing of minimum 6 nos. flood light fittings by 50 mm dia GI round pipe. 11 Mtr street light pole

Supply and fixing of GI 1.5 mtr double Arm Bracket for 11 mtr. GI pole with pole cap (Make: Utkarsh / Bansal/ Jindal/ Transrail as per direction by EIC)

Earthing the installation with 50 mm dia ISI (M) GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI Pipe l

Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supply & Installation of CPRI approved outdoor type M.S.Feeder Box complete with car venture type base pedestal for holding the upper compartment of the Pillar Box. The overall dimension of the above pillar box 1000 x 600 x 450 mm. made from 3 mm thick M.S. sheet with double door for free opening including both side (front & back side). The above door fitted with side of the pillar box by two sets hinge system arrangement with providing capsule hinge welded with the pillar box rigidly incl. providing door handle and providing vent at the top side of the pillar Box incl. padlock system on the above pillar box for extra protection incl. S & F 7(seven) lever (Godrej) padlock with duplicate key in front & back side. S & F of following accessories: a) S & F 415V 125 A TPN SFU (L&T / Siemens / ABB) --- 01 nos. b) s & f of 415 V 200 A Cu BB Chamber c) S & F 415V 63 A, TPN SFU (L&T/ Siemens / ABB) --- 05 nos. d) S & F of pilot lamp (R/Y/B) - 3 Nos. e) S & F of Danger Board – 1 nos. f) Digital metering Arrangement for Voltage & Current-2 set. as per direction of EIC.

Supply & Delivery of 1.1 KV grade XLPE / Armoured Al cable as to GS (Make- Havells / Polycab / Mescab /Gloster) a) 4 core 50 sq.mm

Do---------------Do--------------------Do b) 4 core 16 sq.mm

Do---------------Do--------------------Do c) 2 core 10 sq.mm

Laying of one No. different size LT cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. a) 4 core 50 sq.mm

Do---------------Do--------------------Do b) 4 core 16 sq.mm

Do---------------Do--------------------Do c) 2 core 10 sq.mm

Supplying & Fixing compression Gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry or XLPE armoured cables : a) 4 core 50 sq.mm

Do---------------Do--------------------Do b) 4 core 16 sq.mm

Do---------------Do--------------------Do c) 2 core 10 sq.mm

Finishing the end of following XLPE cables by crimping method incl. supplying & Fixing solderless Socket (Dowels make), tapes, anti-corrosive paste & jointing materials. a) 4 core 50 sq.mm

Do---------------Do--------------------Do b) 4 core 16 sq.mm

Do---------------Do--------------------Do c) 2 core 10 sq.mm

Supply and laying of 1.1 kV grade copper unarmoured round cable of 3 core 1.5 sq. mm from loop box to fittings. [Make:- Polycab/Havells/Gloster/Finolex/KEI/RR Kabel/As per choice of EIC]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint /primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (Schedule - 2017, Page - H-2 (7B)) above 9.0 mtr. long pole. (i) One coat of red lead/Zinc chromate priming per pole (ii) 1st coat of synthetic enamel paint over the primer per pole. (iii) 2nd coat of synthetic enamel paint over the 1st coat

Supply of outdoor stand mounted feeder pillar by 3mm thick ms sheet with 63A TPN MCB incomer, Analog time switch (Cat. No.AUTS01ANA00, Make-L&T), 40A TP contactor for the automatic switching of luminaries, power tool control with 2 no 20A TP MCB and raise lower push button, Incoming 25 sq. mm and out going 16 sq. mm terminals including suitable size and capacity RCC base foundation for above feeder pillar. [Design & Drawing of pillar and make of accessories to the approved before fabrication].

Desktop including Wireless Keyboard & mouse, 12th Gen Intel Core i3-1215U 21.5 inch(54.6cm) FHD 8GB RAM, 512GB SSD, Intel UHD Graphics (Make-HP)

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

S. A. ENTERPRISE (BID ID -6392926)

PHINIX (BID ID -6398231)

BARSHA ENTERPRISE (BID ID -6396882)

BAPPA CONSTRUCTION (BID ID -6389905)

BANERJEE ENTERPRISE (BID ID -6396733)

CITY LIGHT (BID ID -6386641)

M/S MANAB ENTERPRISE (BID ID -6398336)

M/s. Kar Electric Works (BID ID -6398265)