Repair for old building of R.T.O. office at Dharamshala in Distt. Kangra HP (Deposit work)

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete1:6:12 (One cement; Six sand; Twelve graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals

Providing and fixing cement concrete 1:3:6 (1 cement isto 3 sand isto 6 graded stone aggregate 20 mm ( twenty milimetre) nominal size) and curing complete excluding cost of form work in Foundation and plinth as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. the rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of Sail / Tisco /Tata for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement: Six sand) as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (One cement isto Four sand) and curing complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into Sixteen milimetres) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten milimetres) size

100x10mm (One hundred into Ten milimetres) size

Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

Providing and fixing 150mm ( one hundred fifty millimetres) bright finished hard drawn hooks and eyse within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 4 mm tick G.I . Perforated sheet ceiling includng G.I. frame work within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions aluminium frame extrusion sections (No 14081) 127X44.45X3.00mm (one hundred twenty seven into forty four deciman four five into three millimetre) of Jindal / Hindalco aluminium extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing aluminium 8mm (eight millimetre) thick grill anodised powder coated pattern to existing window /ventilatior with 80mmx80mm (eighty millimetre into eighty millimetre) panels holes with 25x8mm (twenty five into eight millimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 4mm (four milimertres) thickness (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 5.5mm (Five decimal five milimertres) thickness (weight not less than 13.75 kg/sqm (Thirteen decimal Seventy five kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 12 mm (twelve millimetre) thick Phenol bonded prelaminated board both side water proof particle board door shutter infull panel Matt finish ISI Marked IS No 12823 Action Tesa / Kitlam / Greenlam / Merinolam / Vista as per ISI and approved shade including fittings within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 10mm (Ten milimetrees) thick antiskid water proof stain resistant and impect resistent heavy duty vetrified tiles Nitco/somany 600x600x10mm (Six hundred into Six hundred into Ten milimetres) size manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles of Orient/ Bell / Rak/ somany/kazaria/johnson 300x300mmx8mm (three hundred into three hundred into eight millimetres) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Unistone not less than 12mm (twelve millimeter) thick cladding on walls/ Reinforced Cement Concrete surface outside as on faces of Arch masonry walls etc.on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto three sand) and jointed with cement slurry including scaffolding etc. complete , within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata Durashine/ sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer fixing with prepainted iron J or L hooks,bolts and nuts with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick Tata Dura shine prepainted steel sheet ISI marked - Z 120 of approved make in ridges of sail / relience / Jindal Sakti with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) dia pipes on wall face P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four point five kilograms per sqaure metres) including filling the joints with approved adhesive complete, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetres) dia pipes on wall face P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four point five kilograms per sqaure metres) including filling the joints with approved adhesive complete, including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. B.P. sheet TATA/SAIL/JINDAL 2.00 mm (Two decimal zero millimeter) thick fixed in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/ electric welding in position complete (frame work is to be measured and paid for separately) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Steel work welded in built up sections TATA/SAIL trusses and framed work in beams, joists channels, angles, tees flat with connecting plates or angles, cleat etcetera in grating, framed gaurd bars, railing, brackets, frame of ceiling and similer works and the like in building including cutting, fixing, hoisting and; placing in position complete and applying a coat of red lead paint complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints /Nerolac suraksha /Bergur paint Exterior Emulsion as per approved shade approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Wall painting of Asian paint/ Nerolac/Berger (two coats) with Premium emulsion paint approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20 mm nominal bore to wall ceiling and floor galvanised mild steel tubes (Light grade) of Tata/Jindal tube fitting and clamps including making good the wall, ceiling and floor complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 15 mm nominal bore

Providing and laying 20 mm nominal bore

Providing and laying 205mm nominal bore

Providing and fixing vitreous China Ordinary closet wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat and over to be measured and paid for separately), within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover of Hindware/cera/Jaquar of star white / snow white shade for wash down water closet with C.P. brass hinges and rubber buffers (white plastic seat and cover) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flat back No of 60002 of size 390 x 375x590mm (three hundred ninety into three hundred seventy five into five hundred ninety milimetres) size Hindware / Jaquare of star white / snow white shade vitreous China urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately awithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Garnet No.10080 of Cera / Hindware 58x43cm (fifty eight into forty three centimetre) (under counter basin) Hindware / cera / Jaquar of star white / snow white shade with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittings within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror of modiguard / autal / Galdin fish or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers s per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. (Chromium plated) ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Jal/ESS ESS brass Towel rail / ring complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P.(Chromium plated) brass screws complete s per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing chromium plated.(Heavy duty makes ISI marked is No. 8931 & 8934) brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal with C.P. brass. (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre nominal bore chromium plated ISI marked fancy bib tap of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan Head of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore PVC connection with brass union 300/450mm length ( three hundred/ four hundred fifty milimetres) length as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 1000 ( one thousand ) litres net capacity tan PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm ( fifteen millimetres) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetres) diametres

150mm (One hundred fifty milimetres) diametres

Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred one milimetres) diametres P.V.C. Supreme/ Kishan/ Astral or equivalent pipe fittings and accessories single for sewerage pipe plain bend complete including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diametres P.V.C. Hindware /Cera /Jaquar or its equivalent Collar ISI marked confirming to BIS-14735 including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres PVC clamps ISI marked of approved design with steel screws and rawls plugs etc complete as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink size 610 x510 mm (six hundred ten into four hundred sixty millimetre) with bowl depth 200 mm (two hundred millimetre) of AMC unik / diamond approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted including cutting holes and making good the same but excluding fitting within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC coloured/white with (dual flushing system) 10.00 Ltrs (Ten litres) capacity low level flushing cistern (Sleek Plus) Hindware/cera/Jaquar of star white / snow white shade with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene float, with flush buffor, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing 32mm ( thirty two millimeters) nominal bore PVC waste coupling of approved quality and colour within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One Cement isto five sand isto ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size bedding for 100mm (one hundred millimetre) dia Stone ware pipes including, necessary form work and curing complete within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1000mm(one thousand milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. /R.B. works R.C.C. work. within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cemnet concrete work 1:1.5:3 ( 1 cement isto 1.5 sand isto 3 grades stone aggregae 20mm( twnety milimetres) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Vinod

Sanjeev Kumar