86/T of 24-25 - 2nd Call of AE/BESD

Amount

S & F cubical shape structure made by 40x40x3mm MS holobar. The size of the structure 16' X 5' X 6" incl. 18 nos. of rectangular holobar for jointing the front side & back side of the structure. The structure to be fabricated by proper welding method, painting and finishing the same as per direction of E.I.C.

S & F (incl. cutting if required) of 3 mm thick exterior Aluminium Composite Panel (Make- Aludecor/ Alstrom/ flexibond/ pratapbond). ACP sheet to be fixed on the front & two vertical sides and to be covered/ moulded all sides uniformly by ACP sheet with proper nuts & bolts, washers including finishing all side as per direction of E.I.C.

S & F (incl. cutting if required) of 1 mm thick (20 SWG) GI Sheet (Make- As per direction of EIC). GI sheet to be fixed on the back side, top & bottom of the structure (99 Sq.Ft, 0.727 Kg/ sq.ft.) and to be covered by GI sheet with proper nut-bolts, washers, screws including painting (if required) and finishing all sides properly as per direction of E.I.C.

S & F Aluminium angle 40mmx40mm of 24 SWG on the outer periphery (front, back & two vertical sides) of the ACP board for providing the extra support and beautification of the steel letter board. Front side of the angle pasted by vinyl of blue colour as per direction of E.I.C. (33 mtr, 0.821 kg/mtr)

S & F of the high glossy stainless steel anodized letter has been fabricated from stainless steel with proper bending, grinding, finishing & argon welding. The base of the letter 24 SWG & side lapping of the letter 26 SWG. The steel letter are to be fixed on the ACP by screw. Matter and size of the letters as below. (1st row- 6", 2nd row- 10", 3rd row- 6", 4th row- 5" & 5th row- 6" or as per EIC.) GOVERNMENT OF WEST BENGAL BARASAT FIRE STATION W.B.F. & E.S. BARASAT, NORTH 24 PARGANAS PH- 03325423444/101

8" logo (as approved by EIC) at the top/inside of the board.

Supply and Fixing of structure made by (incl. fabrication, welding and finishing upto EIC satisfaction) 40 x 40 x 6mm GI angle (considering 1ft angle weight 1.1 kg) -- 16ft = 16*1.1kg=17.6kg and 25mm x 25mm x 6 mm GI angle for necessary LED light support. (considering 1ft angle weight 0.6 kg) -- (4 x 6ft)=24*0.6kg=14.4kg.

Installation, testing and commissioning of the above sign board incl. delivery charges after dismantling the existing one.

Charges of Scaffolding arrangement for fixing the board.

Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [Make- Gloster/Polycab/ RR Kabel]

2 Core 6 Sq.mm

Laying of cable after cutting floor/pavement/wall as per GS for the following Sizes.

2.5 to 35 Sq. mm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

2 Core 6 Sq. mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 6 sqmm cable

Supply & fixing Stainless Steel water proof looping cable box of size 250x200x105mm having sloping canopy, hinged top Cover with rubber gasket lining, railway type mechanical locking arangement, earthing terminal with lug etc. of the following sizes as indicated above, Comprising of one 250 V, 16 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same on wall by necessary nut-bolts, washers, screws, clamp etc. as required.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Finolex/ Polycab/ RR Kabel) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

S & F solderless Copper socket by crimping of Copper wires.

a)1.5 sq mm

Supply & Delivery of Flood light luminaire (IP 66) with peanut lens, made up of pressure die cast aluminium housing with toughened glass and high power LED to ensure uniform distribution and include 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 4400 lumen suitable for use with 230 Volt, 50 Hz. (Make - Philips / Crompton / Wipro), Colour - White

Fixing of 230V, 40 Watt LED Flood light fitting to be fixed with help of suitable arrangement for illuminate infront of Metal Sign board as required with necy. accessories (clamps, nut, bolts, screws, washers incl. painting of angle) as per direction of EIC.

S & F of 250V 1-phase Timer DB (equivalent to 12 way SPNDB in size) on wall with double door sheet steel enclosure, neutral bar, din rail, with lP43 protection comprises with 25A DPMCB (C-curve 10kA) and 1 no. 24 hr. Digital time switch (L&T, Crono 67DDTO) and 1 no. 22/25A 2 Pole power Contactor (L&T, MNX- 22 - 2P) complete with internal wiring with suitable size of PVC insulated copper wire with socketting and 2 nos. Connector including 1 no. Toggle switch for auto/manual operation and 1 no. LED indicator lamp and necessary earthing attachment as per direction of EIC. [Make : L&T/ABB/Legrand]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With ISI-Medium GI pipe as per GS.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil.

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS

No.- 4 SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS.

ELECTROTECH (BID ID -5980315)

M/S R. K. ENTERPRISE (BID ID -5981777)

ROY ENTERPRISE (BID ID -5983757)

JISCO METALAS (BID ID -5979900)

TECHNO FAITH (BID ID -6033681)