Installation of LED Streetlight in newly developed area of Veraval-Patan Joint Municipality

Description Qty Unit Rate L.Cess Amount

Providing and erecting ,Fabricating the box

type items made from M.S. Sheet with A.I.

supports, wings, doors, handles other

hardware materials as per requirement

1 design with finishing by three tank powder 391 No 179 180.79

coating processed inside and outside

painted, erected as directed including minor

Supplying and erecting LED street light /

Flood light fittings with High power White

LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish

powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name

engraved or embossed

120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency >

CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/ BridgeLux (U.S.A.) make LED used for

luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(iii) above 24 to 36 watts Cat-lll (2-16-1)

3 (d) above 36 to 48 watts Cat-lll (2-1-2) 100 No 3312.00 3315.12

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables (4-4-1)