81188/E8

Amount

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down door shutter of any description not exc. 1 sqm each complete all as specified and directed.

Taking down door shutter of any description exc. 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down door shutter of any description exc. 1 sqm but n exc 2 sqm each and refixing in same opening after repair complete all as specified and directed. Note : Damaged builders hardware shall be measured and paid seperatly.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick (Batten thickness) 2nd class hardwood (SAL), plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.

S & F 35 mm thick (Batten thickness) 2nd class hardwood (SAL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.

M & L for 19 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination and other side balancing white lamination and fixed with screws to timber framework complete all as specified and directed.

S & F 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S & F 75 mm size aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F for external teak wood lipping, 6mm thick fixed with nails for 18/19 mm thick block board or veneered particle board complete all as specified and directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth and treated with one coat of creosote oil complete all as specified and directed.

S & F 2nd class hard wood (SAL) plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 3 sqcm but not exc. 6 sqcm complete all as specified and directed.

S & F in repairs brass mortice lock, vertical type, 4 / 4 levers, size 100 mm fixed to aluminium doors complete all as specified and directed.

S & F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm wood grain printed colour PVC sheet reinforced with M.S. square tube, and edges will be painted to match the printed sheet suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded wood grain printed coloured PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets & 5mm thick x 15mm wide PVC sheet beading inside for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain printed colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10mm used and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

S & F mild steel flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe – 290 Grade – E 165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

M & L for preparation of surface of wood and wood based material, new or old and treated with tar or coal tar black paint as in ends of posts, back of chowkhats etc. area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each complete all as specified and directed.

M & L for preparing surface of wood or wood based material, steel and iron work, new or old such as stop, covers, gully gratings, hold fasts, end of posts, back of chowkhats etc and treated with tar or coal tar paint, areas tarred not exc. 0.10 sqm each complete all as specified and directed.

S & F aluminium powder coated of colour as approved, openable sliding type three track window/ventilators with sliding shutter and frame with aluminium section as per following specifications and as directed at site. :- (a) FRAME SECTION: - 76.20 X 44.46 X 2 mm. (b) SHUTTER TOP BOTTOM AND SIDE RAILS : - 83.50 X 14.45 X 2 mm. (c) GLASS PANE:- 5 mm thick glass pane with one side reflecvtive glass and other side visible of with rubber gasket with clip and hold fasts 04 Nos. for each window including necessary handles, tower bolts etc complete all as specified and directed. (d) Aluminium Grill: - Aluminium grill 7.5 mm dia design DG-102 make DECO grill or design No. AL-103 make fixed to aluminium section 50X20X1.5 mm in existing opening. (e) Stainless steel wire clothy 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinted tacks or glavanised wire staples complete all as specified and directed.

S & F 150 mm long anodised aluminium handle, cast type complete all as specified and directed.

S & F 200 mm long (Length of bolt) mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F 100 mm long butt hinge cast brass with mild steel hinge pin bright polished type B-11 complete all as specified and directed.

S & F 2nd class hardwood (SAL) small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labour article not exc. 200 cucm each complete all as specified and directed.

S & F 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S &F for aluminium anodised powder coated sliding two track window/cup board shutter and frame with and including 5 mm thick plain glass, size of frame 61.50X31.75X1.3 mm thick for top and sides, 68.50 X 31.75X 1.2 mm thick, bottom and shutter frame 38X18X1.5 mm thick, including necessary handles, tower bolts etc complete all as specified and directed.

S & F for anodised aluminium frame powder coated for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F 4 mm thick figured glass, pin head type and glazing fixed in alumiunm ventilator with oil putty or fixed with beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F for black marble stone slab (Bhaislana Zebra), 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 20 mm thick screed bed in CM 1:4 and exposed edges of stone slab shall be grinded smoothly complete all as specified and directed.

BHUWAN SINGH ADHIKARI

Builders Harpal

M/s M Aali construction co