Kerala

Active

Works

Civil Works - Roads

Annual Plan-Aym GP 280/27-Ward 9 Anganwadi completion-General Civil Work

Local Self Government Department

Aymanam GP | Kottayam, Kerala

Amount: ₹8.5 LCloses: 6 Oct 20267d left

Timeline

Published28 Sept 2026
Closes6 Oct 2026
Bid Opening8 Oct 2026

Corrigenda

Corrigendum

1 updatesLatest on 28 Sept 2026

Tender Value

₹8.5 L

EMD Value

₹21,186

Closing Date

6 Oct 2026, 5:00 pm7d left

Tender Inviting Organisation

Name

Priya Mary Philip

Address

Office of the Assistant Engineer LID EW Section Aymanam GP

Work Description

Annual Plan-Aym GP 280/27-Ward 9 Anganwadi completion-General Civil Work

Tender Information

Tender ID

2026_LSGD_873594_18

Reference Number

AYM 21/26-27

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Location

Aymanam GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

please refer the tender document

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF E - PAYMENT FORM (.pdf)

RequiredSCANNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSBD DOWNLOADED FROM E TENDER WEBSITE (.pdf)

RequiredTENDER SCHEDULE (BOQ) (.xls)

RequiredBIDDER VALID REGISTRATION CERTIFICATE (.pdf)

RequiredBIDSUBMISSION FEE REMITTANCE (.pdf)

RequiredGST RESISTRATION (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,870

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹21,186

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

8 Oct 2026

Download Starts

28 Sept 2026

Download Ends

6 Oct 2026

Submission Starts

28 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (19 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1COMMUNITY HALL
1.001	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	5.36	cum	-	-
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	173.55	sqm	-	-
1.003	4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.35	cum	-	-
1.004	4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts	8.4	sqm	-	-
1.005	9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	457.2	kg	-	-
1.006	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	221.02	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	589	kg	-	-
1.008	OD212559/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required	70.8	sqm	-	-
1.009	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	11.8	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Work Item Documents

280SBDNIT.pdf

Tender Documents • 0.97 MB

280NIT.pdf

Tender Documents • 0.34 MB

BOQ_1482416.xls

BOQ • 0.26 MB

Corrigendum Documents

ETENDER.pdf

PDF • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1COMMUNITY HALL
1.001	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	5.36	cum	-	-
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	173.55	sqm	-	-
1.003	4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.35	cum	-	-
1.004	4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts	8.4	sqm	-	-
1.005	9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	457.2	kg	-	-
1.006	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	221.02	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	589	kg	-	-
1.008	OD212559/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required	70.8	sqm	-	-
1.009	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	11.8	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1COMMUNITY HALL

1.001

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.36

cum

1.002

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

173.55

sqm

1.003

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.35

cum

1.004

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

8.4

sqm

1.005

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

457.2

1.006

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

221.02

1.007

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

589

1.008

OD212559/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

70.8

sqm

1.009

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

11.8

metre