RENOVATION OF GIS BUILDING AND CONFERENCE ROOMS

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each.

Taking down and refixing shutters of any description exceeding 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.

Taking down aluminium frame with glass shutters (without taking off shutters from the frame) exc 4.00 sqm each.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris outside BISAG.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips removing broken glass BISAG land etc complete all as specified and as directed.

Taking up or down steel tubing pipes and connection 15mm dia steel tubing and connection all as specified and as directed.

Taking up or down steel tubing pipes and connection 20 mm dia all as specified and as directed.

Taking up or down steel tubing pipes and connection 25 mm dia all as specified and as directed.

Taking up or down steel tubing pipes and connection 40-50 mm dia all as specified and as directed.

Dismantling water tanks exc 1000 but n.exc 2000 Ltrs capacity.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of stone slabs & tiles, Kota stone of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified.

Demolition of Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

Demolition of reinforced cement concrete of any description and in any position all as specified

Removing building materials (Bricks, Brick dust, stone, sand, aggregate, tiles) etc. to a distance up to 500 m lead as directed by Engr inCharge. Note : Rate quoted shall deem included for loading &unloading and stacking at the destination complete,

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified & directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1,5m above the starting point.

M&L 25mm thick Sand filling under floors or in foundations including watering and laid dry over PCC laying interlocking tiles complete all as specified

M&L ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed.

M&L ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by Engr-in-Charge.

M&L PCC(1:2:4) type B1 using 20mm graded stone aggregate as in benching complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:3:6 type C0 as in filling/packed with back side all around pressed steel frame complete all as specified and as directed.

M&L PCC 1:3:6 type C2 using 40mm Graded stone aggregate as in foundation, filling and mass concrete for base of manholes complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in kneelers, coping etc complete all as specified and as directed.

M&L Precast cement concrete(1:2:4) type B1 using 20mm graded stone aggregate as in precast manhole covers and set in cement mortar (1:6) complete all as specified and as directed.

Supply only integral water proofing compound

M&L Extra for forming fair finished channels 30cm inner girth in cement concrete using extra cement including forms moulds etc complete all as specified and as directed

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall , built in cement mortar 1:6 complete all as specified and directed.

M&L 25mm thick granite (of any type) work (table rubbed and polished including moulding in single piece)as in steps, jambs, pillars, window cills, cooking platform, WHB platform in any position including screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match with vision panels or peepholes, square or rectangular including lipping complete all as specified

S&F Solid PVC Single Moulded door frame of size 50mm x 95mm made but single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, as per specification & drawing complete all as specified and directed. (Make - Rajshree/Sintex.)

S&F Factory Made Solid PVC Moulded Door Shutter wooden, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Prelam colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M&L Repair and refixing of doors shutters exc 1 sq. m and n exc 2 sq m each of any description in same opening, , fittings & adjustment for smooth functioning complete all as specified and as directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as in repairs complete all as specified and as directed

S&F 100mm long butt hinges, medium weight, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

S&F 150mm long extruded brass handles, fabricated type polished all as specified and as directed by Engineer-in-Charge.

S&F 200 mm extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 300 mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm long butt hinges, medium weight, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete in repairs all as specified and directed.

S&F 150mm long extruded brass handles, fabricated type polished complete in repairs all as specified and directed

S&F 200 mm extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete in repairs all as specified and directed

S&F 300 mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete in repairs all as specified and directed

S F 4 levers Brass Mortice lock vertical type, size 100mm all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete in repairs all as specified and directed Make : Godrej

S&F Door close hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild steel TMT bars, 6mm to 8mm dia cut to length bent to shape required including cranking, bending ends and binding with MS wire (annealed) not less than 0.9mm dia as specified.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, FI hold fast etc complete all as specified and directed.

S&F Aluminium alloy powder coated standard hollow section frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (thickness of powder coating 50 micron) complete all as specified and directed.

S&F Decorative laminate type 1 of 1mm thick glossy surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete as in repairs all as specified and directed

S&F Fully perforated 12mm thick micro regular edged or 10 mm thick square edged G.R.G. (Glassfibre Reinforced Gypsum) False ceiling tiles of size of 595mm x 595mm of approved texture, design and Patten having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476(part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. All accessories should be fixed as per manufacturer's instructions. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge Make - Gyproc of Saint Gobain/Armstrong or equivalent.

M&L Broken stone boulder as in hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface.

M&L 100 mm thick PCC (1:4:8) type D-2 (40mm graded aggregate) in foundation, filling and flooring complete all as specified.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shape of paver block complete all as specified and directed.

M&L Ffactory made kerb stone of M-25 grade laying at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including provision of drainage opening wherever required complete all as specified and directed.

S&F Rectified ceramic Coloured tiles in vertical surfaces of size 600mmx300mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10mm thick in cement plaster 1:4 complete all as specified and as directed.

M&L Rectified Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not.exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM (1:6) all as specified and directed.

M&L Marble tiles 15-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment including 15mm thick screed bed in cement mortar (1:4) to match the shade of Marble slab for floor etc all as specified and directed in Engineer -in -Charge

M&L 18 to 20mm thick machine cut Kota stone slab flooring size:-595x595 mm over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Grove cutting ,moulding ,rubbing and mirror polishing complete all as specified and as directed.

SF 4.5 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting with linoleum is sealed down with an approved adhesive complete all as specified as directed.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish and including machine polishing to edge, Grove cutting ,moulding complete all as specified and directed.

M&L Rendering to brick/concrete surfaces 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified. Note:- Water proof compound will be measured and paid separately.

M&L Rendering to brick/concrete surfaces 15mm thick in CM (1:4) on other than fair faces of brick work complete all as specified.

M&L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement complete all as specified and as directed.

M & L Preparation of old surface of wall and applying putty 2 mm thick or more as required to level the wall surface complete all as specified as directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). Including scaffolding complete all as specified and as directed.

M&L Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

M&L Preparation old surface of wall and applying two coat of distemper oil emulsion over complete all as specified and as directed.

M&L Preparation of new plaster surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L Preparation of old surface of ceiling and applying one coats of oil bound distemper oil emulsion over wall care putty 2 mm thick or more as required to level the wall surface complete all as specified as directed.

M&L Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Complete removal of old treatment of old surfaces of wall by brooming down or steel wire brushing, scrapping down smoke, efflorescent salts, oil, greasy spot or peeled off surfaces and applying a layer of Birla white putty 2mm thick even and smooth and applying two coats of plastic emulsion paint (approved quality & tint) over a coat of alkali resistant primer using painting roller all as specified and directed.

M&L Preparation of concrete surface of any description over 10cmgirth or width, not otherwise described applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L Preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide complete all as specified and directed

M&L Complete removal of existing treatment to steel and iron surface of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer including easing of steel door by providing lubricant oil to hinges/pivot complete all as specified and directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 50 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 15 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete in repairs all as specified and as directed.

S&F 20 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repairs all as specified and as directed.

S&F 25 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete in repairs all as specified and as directed.

S&F 50 mm Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete in repairs all as specified and as directed.

S&F 2000 Litres capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position all as specified in SSR part -I including Union,25 mm ball brass valves ,high pressure with polythene float and flynut complete ,screwed for 25mm iron pipe or brass ferrule fixed and complete all as specified as directed.

S&F 1000 Ltrs capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over PCC platform including all fitting such as connection pipe pieces with tank nipple for inlet, outlet, washout etc and including fixing only ball valves complete.

S&F 25 mm ball brass valves, high pressure with polythene float and flynut complete, screwed for 25mm iron pipe or brass ferrule fixed and complete in repairs all as specified as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete in repairs all as specified as directed.

S&F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete in repairs all as specified as directed..

S&F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified as directed..

S&F PVC(SWR) 75 mm bore Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete in repairs all as specified as directed.

S&F PVC(SWR) 75 mm bore Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC(SWR) 40 mm dia Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC (SWR) 110 mm dia bends any radius etc complete in repairs all as specified as directed..

S&F PVC (SWR) 75mm dia bends any radius complete in repairs all as specified as directed.

S&F PVC (SWR) 40mm dia bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction double,(double T) with assess door equal or unequal complete in repairs all as specified as directed..

S&F 75 mm dia PVC (SWR) junction double,(double T) with assess door equal or unequal complete in repairs all as specified as directed..

S&F 110 mm dia PVC (SWR) branch piece,(double Y) equal or unequal complete in repairs all as specified as directed.

S&F 75 mm dia PVC (SWR) branch piece,(double Y) equal or unequal complete in repairs all as specified as directed.

S&F 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete in repairs all as specified as directed..

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as in repairs all as specified and directed.

S&F 110mm dia cast iron/ PVC nahani trap complete all as specified and directed.

S&F 75mm dia cast iron/ PVC nahani trap complete all as specified and directed.

S&F 110mm PVC (SWR) bore coupler complete all as specified and directed.

S&F 75mm PVC (SWR) bore coupler complete all as specified and directed.

S&F 110 mm PVC (SWR) 'P' trap with accessories complete as in repairs all as specified and directed.

S&F 110 mm PVC (SWR) 'S' trap with accessories complete as in repairs all as specified and directed.

M&L PCC (1:3:6) type C2 using 40mm graded aggregate for concrete bed to RCC drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested.

M&L Reinforced concrete pipes 150 mm dia, class NP2, laid and jointed complete with collars

S&F Vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' or `S' trap, and to flushing pipe etc complete including making good to floor complete as in repairs all as specified and as directed. (Make :-Cera or Equivalent)

S&F 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets flush pipe polyethylene of low or high density of PVC 32 mm dia,for low level cistern with PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed .(Make :-Cera or Equivalent)

S&F Manually operated blackout roller blinds of size as per requirement width & drop, having hardware top tube made of extruded aluminium with 38mm dia and wall thickness of 1.2mm with spline adoptable to accommodate clutch of UNISILIL/ACMEDA make CLUTCH MECHANISM moulded plastic having self lubrication with glass fibre reinforcement having a minimum lifting capacity head adoptability 38mm operating chain plastic/steel ball chain adoptable to the clutch pitch for smooth operation of blinds locking member plastic /steel stop locks for limit setting adoptable to be steel chain bonding 30/36mm wide double sided adhesive tape of 3M for strong holding capacity SPRING BOOSTERS provided as per the requirement bottom bar aluminium extruded circular section with powder coated finish , having a min. weight to be 365gms /Rm for a perfect fall to fabric to avoid warpage /floating ends are covered with ends cap to give a perfect finish FABRIC – blackout roller blinds WINFAB MAKE composition PVC/FIBREGLASS weight 470gms/sq mtr etc Indore Air Quality – Green Guard/ ECO-Codices Certified complete all as specified and as directed. Make: Marvel /D’ Decor /Hunter Douglas or equivalent make as approved by GE

S&F Manually operated blackout roller blinds of size as per requirement width & drop, having hardware top tube made of extruded aluminium with 38mm dia and wall thickness of 1.2mm with spline adoptable to accommodate clutch of UNISILIL/ACMEDA make CLUTCH MECHANISM moulded plastic having self lubrication with glass fibre reinforcement having a minimum lifting capacity head adoptability 38mm operating chain plastic/steel ball chain adoptable to the clutch pitch for smooth operation of blinds locking member plastic /steel stop locks for limit setting adoptable to be steel chain bonding 30/36mm wide double sided adhesive tape of 3M for strong holding capacity SPRING BOOSTERS provided as per the requirement bottom bar aluminium extruded circular section with powder coated finish , having a min. weight to be 365gms /Rm for a perfect fall to fabric to avoid warpage /floating ends are covered with ends cap to give a perfect finish FABRIC – blackout roller blinds WINFAB MAKE composition PVC/FIBREGLASS weight 470gms/sq mtr etc completeas in repairs all as specified and as directed. Indore Air Quality – Green Guard/ ECO-Codices Certified. Make: Marvel /D’ Decor /Hunter Douglas or equivalent make as approved by GE

S & F Aluminium powder coated ) min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fabricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) portion glazed with 3mm thick frosted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperture with 25x3 mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down of old ventilator complete all as specified and as directed .

M&L Aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 4 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortise lock complete all as specified and as directed.

S&F Aluminium partition min thickness of powder coating 50 micron (of approved colour) made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) and 12 mm prelaminated particle board/12 mm thick PVC hollow sheet ,4mm thick Bakelite sheet all necessary fittings complete as in partition all as specified and as directed.

S&F 150 mm floor door stopper of brass powder coated, with hard down steel spring complete as in repairs all as specified and as directed.

S&F 12 mm thick frosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 350 mm long 'H' Types glass door handle standard, locking arrangement including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed.

M&L Stone railing jallies having one side carving of approved design and pattern (Jali pattern) using yellow Jaisalmer stone) suitable for flat surfaces containing of size: 900mm x 900mm x 40mm thick to levelled surface in cement mortar 1:4 after dismantling of existing RCC jali of any description, size and cleaning of existing surfaces for resting base stone and making good surface with neat cement making all holes fix with coloured cement and, chemical to match the colour of railing/jallies washing of complete prepared jallies with mixture of water acid followed by coloured cement polishing to match the natural texture of stone all as specified and directed.

S&F Kitchen sink or laboratory sink double bowl , 304 grade with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever RCC platform and sink size 925x450 mm ,Bowl size 425x400 mm and 425x400 mm Depth 200 mm including outlet connection pipe, square strainer complete as in repairs all as specified & directed.

S&F Single piece WC with PP soft close seat cover, hinges dual flush, cistern fittings, fixing accessories and accessories set of size 360mmx640mmx685mm with 'S' trap 110 mm complete as in repairs all as specified and as directed. (Make :-Jaquar Cat part No SLS-WHT-6851S110PP or Equivalent make as approved by GE in writing )

S&F Rimless Back to Wall WC with UF soft close slim seat cover, hinges ,fixing accessories and accessories set of size 370mmx580mmx430mm with 'P' trap 180 mm complete all as specified and as directed. (Make :-Jaquarr Cat part No-OPS-WHT-15955P180UFSM or Equivalent make as approved by GE in writing )

S&F Control Plate Alive complete all as specified and as directed. (Make :-Jaquar Cat part No JCP-CHR-852415 or Equivalent make as approved by GE in writing )

S&F Single piece slim Concealed cistern with floor mounting frame ,installation kit and ''P- Type " Drain Pipe connection set for wall hung WC complete all as specified and as directed. (Make :-Jaquar Cat part No JCS-WHT-2400FP or Equivalent make as approved by GE in writing )

S&F Hand rail wall mounted hinged size 750x100 mm complete all as specified and directed Make : (Cera CAT No. B2210108 or Equivalent make as approved by GE in writing )

S&F Wall mounted Grab bar 600mm long complete all as specified and directed (Cera cat No. B2210106 or Equivalent make as approved by GE in writing )

S&F Wall mounted inverted 'L' shaped grab bar with 500 & 700mm long bars complete all as specified and directed Cera cat No. B2210103 or Equivalent make as approved by GE in writing )

S&F Round shape thin rim table top basin with fixing accessories of size 360mmx360mmx120 mm including SS 32mm Waste coupling full thread all necessary fitting complete all as specified and as directed. (Make :-Jaquar Cat part No SSL-WHT-6905,ALD-705L130 or Equivalent make as approved by GE in writing )

S&F Round shape thin rim table top basin with fixing accessories of size 480mm x480mm x135 mm including SS 32mm Click clack waste coupling full thread 130 mm height all necessary fitting complete as in repairs all as specified and as directed. (Make :-Jaquar Cat part No OPS-WHT-15901N,ALD-727L130 or Equivalent make as approved by GE in writing )

S&F Urinals with spreader hole and fixing accessories of size 355 x340x535 mm including SS 32mm Waste coupling full thread all necessary fitting complete as in repairs all as specified and as directed.. (Make :-Jaquar Cat part No URS-WHT-13261H,ALD-705 or Equivalent make as approved by GE in writing )

S&F Urinals (Back inlet) with and fixing accessories of size 385x325x635 mm including SS 32mm Waste coupling full thread, Auto closing Concealed Urinal Flush Valve with wall flange complete all as specified and directed. (Make :-Jaquar Cat part No URS-WHT-13253N,ALD-705, PRS-073 or Equivalent make as approved by GE in writing )

S&F Curved shaped urinal partition with frosted glass 10 mm chrome finish of size 900x450 mm and including fixing with SS brackets including taking down exist partition complete as in repairs all as specified and as directed..(Make: Jaquar Cat No JSE-CHR-110UC450X or Equivalent make as approved by GE in writing )

S&F Urinal spreader of chromium plated of any colour for fixing with 15mm dia pipe complete as in repairs all as specified and as directed ( Make :- Cera Cat No. F8070201 or Equivalent make as approved by GE in writing )

S&F Bottle traps 32 mm size with 300mm and 190 mm long wall connected pipes and wall flange for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing ,union, cap and fixed complete all as specified and directed ( Make :- Jaquar cat no. ALD-769L250x190 or equivalent make as approved by GE in writing )

S&F Towel ring square with round flange complete as in repairs all as specified and as directed Make : (Jaquar CAT No. ACN- 1121N or equivalent make as approved by GE in writing )

S&F Towel ring square with round flange complete all as specified and directed by Engr-in-Charge Make : (Jaquar CAT No. ACN- 1121N or equivalent make as approved by GE in writing )

S&F Wall mounted Soap dish (Polycarbonate) holder with wall flange complete all as specified and directed Make : (Jaquar CAT No. AQN -7733 or equivalent make as approved by GE in writing )

S&F Soap dispenser with metallic bottle complete all as specified and directed (Make :-Jaquar Cat part No ACN-1137N or equivalent make as approved by GE in writing )

S&F Toilet paper holder with Flap Recessed type stainless steel flap with wall fange , (Make :-Jaquar Cat part No AHS-1553 or equivalent make as approved by GE in writing )

S&F Toilet paper holder with stainless steel flap with wall fange complete as in repairs all as specified and as directed , (Make :-Jaquar Cat part No CAN-1153S or equivalent make as approved by GE in writing )

S&F Bib cock with wall flange complete all as specified and directed Make:- Jaquar CAT No OPP-15037PM or equivalent make as approved by GE in writing )

S&F Bib cock with wall flange complete as in repairs all as specified and as directed Make:- Jaquar CAT No COP-037PM or equivalent make as approved by GE in writing )

S&F Single lever Tall boy with 150mm Extension Body fixed Spout without popup waste with 600 mm long braided hoses complete all as specified and as directed.(Make :-Jaquar Cat part No OPP-15005BPM or equivalent make as approved by GE in writing )

S&F Single lever tall boy without popup waste system with 600 mm long braided houses complete all as specified and as directed.(Make :-Jaquar Cat part No COP-005BPM or equivalent make as approved by GE in writing )

S&F Angular stop cock with wall flange complete all as specified and as directed.(Make :-Jaquar Cat part No OPP-15053PM or equivalent make as approved by GE in writing )

S&F Angular stop cock with wall flange complete as in repairs all as specified and as directed.(Make :-Jaquar Cat part No COP-057PM or equivalent make as approved by GE in writing )

S&F Sink Cock with regular swinging spout (wall mounted modal) with wall flange complete as in repairs all as specified and as directed.(Make :-Jaquar Cat part No LYR-38347S or equivalent make as approved by GE in writing )

S&F Hand shower (Health Faucet) brass chromium plated with 8 mm Dia 1.2 meter long flexible tube and wall hook(back flow preventor ) complete all as specified and as directed.(Make :-Jaquar Cat part No ALD-577 or equivalent make as approved by GE in writing )

S&F Stainless steel grating doom 150x150mm complete all as specified and directed.

S&F Stainless steel grating doom 150x150mm complete as in repairs all as specified and as directed.

S&F 32mm PVC waste pipe for wash hand basin/urinal/sink 900mm long complete as in repairs all as specified and as directed

S&F Wall mounted automatic hand dryer machine for washroom fixing with nails/screws etc complete all as specified and as directed.( Make:- Dolphy or equivalent make as approved by GE in writing )

S&F PVC Wall panelling of Multi Chambered UPVC Panel of 295mm Wide , 2900mm Length,10mm Thickness,1mm Wall thickness with 10 mm thick ribs, Can be interlocked by tongue n groove method Flat Surface with Multiple Grooves in between for Aesthetic Look ,Shall be Availed in Flat, 2/7/ 9 Groove pattern. Internal batten shall be made of solid UPVC foam profile with 26 mm width and 8mm thick. Batten aligned horizontally along the wall with 50 mm gap above the floor & below the ceiling, Internal battens shall be fixed 450mm centre to centre in between. Junctions & corners should be covered by solid foam beading profiles complete all as specified and directed.(Make :-Veenus/Giza/Sintez or equivalent make as approved by GE in writing )

S&F 18 mm thick PVC Sheet one side prelaminated pf approved texture (Celuca ply ,Rajashree or equivalent in sintex as approved by GE) as in cabinet with shelves and partitions including required beading and accessary auto close hinges, magnetic catch lock ,SS handle/ Profile complete all as specified and as directed by Engineer-in-Charge.

S&F Rain water single pipe line of 110 mm (4") dia vertical fixed with wall distance 3" with Each plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm approx. Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration - Zn Al Flake coated refer Technical drawing etc complete all as specified and as directed by Engr- in-Charge (i) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated 2 Nos complete all as specified and directed.

S&F Rain water single pipe line of 75 mm (3") dia vertical fixed with wall distance 3" with plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm approx., Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration Zn Al Flake coated refer Technical drawing etc complete all as specified and as directed by Engr- in-Charge (1) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated -2 Nos complete all as specified and directed. Note :Tiles jointing materials required as per manufacturer's instruction shall be inclusive in the quoted rates

M&L HD matt finished Double Charged Polished Vitrified tiles 9/10 mm thick (square/ rectangular) polished, area of each tiles size:-800 x1600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 15mm thick CM (1:6) screed bed with including tile adhesive all as specified. Make:- (Kajaria or Equivalent) Note :Tiles jointing materials required as per manufacturer's instruction shall be inclusive in the quoted rates

M&L HD matt finished Double Charged Polished Vitrified tiles 9/10 mm thick (square/ rectangular) polished, area of each tiles size:-800 x1600 mm on vertical surfaces/skirting/Wall and including backing coat of 10mm thick in CM (1:4) with including tile adhesive all as specified and directed.

S&F Powder coated aluminium frame with acrylic letter 3 mm thicks with LED light and power supply connection and fixing arrangement of size 300mmx750 mm as per manufacture instruction all as specified and directed

S&F Powder coated aluminium frame with acrylic letter 3 mm thick with LED light and power supply connection and fixing arrangement of size 450mm x750 mm as per manufacture instruction all as specified and directed

S&F Powder coated aluminium frame with acrylic letter 3 mm thick with LED light and power supply connection and fixing arrangement of size 500mm x 600 mm as per manufacture instruction all as specified and directed by Engineer in-charge.

S&F Toilet cubicle (of following standard dimension which including door of any description or size made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by Govt approved test lab. Finish of the compact laminate should be Suede / *Raw Silk, which includes doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS: 2046 (Indian Standard) ,as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware matching with HPL boards or as per client requirements like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U-Channels, (6) Shoe Box Plate (7) MS-Base Plate, (8) Top rail with Corner connector (9) Rubber noise deafening tape (10) Screws & wall Plugs. The top fitting should consist of round top rail which will get fixed with pilasters, with SS panel tube holder, SS corner bend (connected with top rail) will be used on the corner of cubicle in absence of brick wall, wall fixing is used only on the wall which will hold the top rail. All screws will of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel bottom cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 75mm. The following parts are as under :- Make : Greenlam Industriers Ltd or equivalent make as approved by GE

S&F Toilet cubicle I-shaped (Front portion) with standard dimension of size upto( 2100 mm Height and 1500mm Width ), which including door shutter complete accessories all as specified as directed by Engineer in-charge.

S&F Urinal Partition with standard dimension of size upto (1200 mm Height and 450 mm width) made of above specification complete all as specified as directed by Engineer in-charge.

S&F Lockers unit self-supporting 9mm Shutter, Shelves & Skirting 1,3mm (Back and centre partitions) and 6mm[Sides) thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Green guard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Aluminium alloy grade 6063-T6 available in Charcoal black or natural anodized Finish hardwares as per manufacturer's specifications & Architects instructions like [1] Mid and corner extrusion made up of aluminium alloy grade 6063-T6 available in Charcoal black and Natural Anodized Finish [2] SS grade 316 Key Lock I Standard) & Numeric Lock (Optional) in Charcoal black Color. (3) SS grade 316 Hinge available in Charcoal black Color powder Coating/ SS brush finish [4] Black sound buffer rubber Profile. [5] SS grade 316 thread Cut Screws for Fixing Top and Bottom Plate. Top, Bottom, Shelves and Skirting are made of 9mm thick compact laminates, Side, Intermediate and Back walls are constructed of 3mm and 6 mm compact laminates.

Locker 3 Tier with standard external dimension of width 300mm, internal depth 435mm, outer depth 465mm, height of locker 1898mm, door height of each tier 597mm and height of skirting is 80mm

Locker 4 Tier with standard external dimension of width 300mm, internal depth 435mm, outer depth 465mm, height of locker 1898mm, door height of each tier 447mm and height of skirting is 80mm

S&F Vanity self- supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of hardwares as per manufacturer's specifications & Architects instructions like (1) L bracket (2) Screws & wall Plugs | SS-316).Vanity box should be joined with 12 mm thick compact laminates on front side upto length of WHB area.

S&F Vision Barrier self-supporting 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards.This also includes providing and fixing in position necessary hardware made out of Stainless steel/Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available colour hardwares as per manufacturer's specifications & Architects instructions like [1] Double Coat hook made in SS 316 in SS brushed finish with fine spark texture on nylon parts [2] U & F-profiles in Aluminium alloy grade 6063-To with powder coating in available colours (3) SS grade 316/Nylon divider mounted sleek leg with Ground Clearance [120-150mm) (4) Aligning SS grade 316 common top rail 25.4mm diameter round pipe fixed with wall connector made of 316 grade stainless steel in brushed finish (5) Screws & wall Plugs (SS-3161.Available Design Options 11-Loop In: 12mm thick compact with minimal wall touch divider of size 730mm(D) x 2100mm[H] with ground clearance of 150mm mounted on sleek leg, fixed with bracket, hence higher hygiene quotient. With In-built hook design feature within dividers for improved utility. 21-Loop Out: 12mm thick compact divider with straight edge of size upto 730mm(D) x 2100mm(H) with ground clearance of 150mm mounted on sleek leg, fixed with U profiles of size 18mmx16mm. All screws will be of 316 Grade in stainless steel. All pilasters are supported by grade 6 Nylon Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm.

M&L Point wiring for modular accessories with modular metal flush box complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed for the following.

One light/bell/fan point controlled by one switch complete

One 3 pin socket out let 5 Amps on the independent board.

–do- but one 3 Pin socket out let 5 Amps on the same board.

Ditto- all as above item No.171 but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps. Complete all as specified and directed

S&F Modular switch one way 6A,1 Module, as per existing make crabtree/ABB/indoasian/ss/anchor roma etc ,complete all as specified and directed

S&F Modular switch one way 16A,1 Module, as per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed

S&F Modular socket 6/10A-2/3 pin combined 2 Module As per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed

S&F Modular socket 16/15A-2/3 pin combined 2 Module As per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed

M&L Point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100V grade drawn through and incl PVC casing in capping /conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLS cable 1100V grade as earth continuity wire incl sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for one 3 Pin socket out let 5 Amps on the same board complete all as specified and directed

S& F Switch piano type 230 volts , 5 Amps, single pole complete all as specified and directed

S & F Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts complete all as specified and directed

S & F Piano socket , 15 Amps. complete all as specified and directed

S & F Piano switch , 15 Amps. complete all as specified and directed .

S& F Ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed

S & F White cover plate with frame, 3 module complete all as specified and directed

S & F White cover plate with frame, 6 module complete all as specified and directed

S & F White cover plate with frame, 8 module complete all as specified and directed

S & F Replacement white acrylic plate size 10"x5" or 12"x5” complete all as specified and directed

M&L Sub main wiring complete with two run of 6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :- Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length. complete all as specified and directed by Eng-In-Charge.

M&L Sub main wiring complete with PVC insulated cable two run of 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

M&L Sub main wiring complete with PVC insulated cable two run of 2.5 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories including 2.5 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 2.5 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

M&L Sub main wiring complete with PVC insulated cable two run of 1.5 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 1.5 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 1 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/gray colour complete all as specified and directed by Eng-In-Charge.

S & F TPN double door DB 4 way incl civil work complete all as directed by Engineer-in-Charge. Make : Havells/Legraind/L&T/ Anchor

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 12 ways SPN complete all as directed by Engineer-in-Charge. Make : Havells/Legraind/L&T/ Anchor

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways SPN complete all as directed Make : Havells/Legraind/L&T/ Anchor

S & F Factory made single pole and neutral sheet metal enclosure with a two Pin Socket plug and socket with one single pole MCB 240Volts, 20 Amps, capacity complete all as specified and directed

S & F MCB, TPN 415 volts, 63 Amps capacity complete all as specified and directed

S & F MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified and directed

S & F MCB, SPN 240 volts, 5-32 Amps capacity complete all as specified and directed

S & F MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed

S & F MCCB 3/4 Pole .415 V. fixed type,25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed

S & F LED tube light fittings 1x20Watts, 230 volts surface and wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired complete all as specified and directed

S & F Exhaust fan 250/300 mm sweep silent type in PVC Body as required at site. complete all as specified and directed Make:-Bazaz/Havells/Oreint or equivalent

S & F LED light fittings 1x10Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired complete all as specified and directed

S&F Water cooler electric driven SP , stainless steel type having approx storage capacity of 120 ltr and nominal cooling capacity of 60 ltr per hours complete all as specified and directed .

Supply and lay pipe galvanized mediam grade class including all type of fittings and assesories of size 20 mm bore complete all as specified and directed

S&F Gun metal, globe or gate valve, 20 mm dia with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F Brass stop cock of size 20 mm dia, screwed both ends for iron pipe and fixed complete all as specified and as directed

Supply , install high wall split type air conditioner unit indoor/outdoor complete with cordless remote control unit and within built air ioniser and plasma filter for batter indoor air quality and EER 3.2 of cap 2.0 ton inverter type 5 star of make Daikin or equivalent of Voltas/bluestar Note: Contractor shall be provided extra copper pipe and drain pipe if required without any cost to department

S&F Package reverse osmosis system water purifier of capacity 25 ltr per hour, Fully automatic with auto cut off R0+UV+Alkaline Potable Water Purification System wall mounted with softener, with complete fitting single phase with sensor complete all as directed.

divyarsh entrprise