Restoration of damages caused due to laying of OFC near Sub Division office building Chakkar at Nerchowk, Tehsil Balh, Distt. Mandi (HP)

Providing wood work in frames of false ceiling, partitions etc. Sal wood sawn and fixed in position with necessary stainless steel screws etc. including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Providing and Fixing Wall Paneling of 12 mm thick Deodar wood 2nd class 4.00 X 4.00 cm frames @ 60 cm centre to centre on both side fixing with robber plugs wide and 12 mm deep groves of required pattern of 25x12 mm/cornish out of (75x60) mm of different pattern in top middle and corner joints including polishing and painting groves complete including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Providing and fixing IS marked flush door shutters conforming to ISI : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched-teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25mm thick (for cupboard) including ISl marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessar/ screws including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Providing and Fixing 10mm thick Paraquit or action tesa clip in preliminated wooden flooring (H.D.F. AC-4) over C.C. base with poly sheet & thermocoal sheet cushion below complete including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Providing and fixing special quality bright finished brass cupboard 50 mm or ward robe locks with four levers of approved quality including necessary screws etc. complete including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass handles 125 mm with screws etc. complete including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement: 3 coarse sand (Zone-III) : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, dressing & finishing the top smooth including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (One cement : Six coarse sand) including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 g/l of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats including carriage of material with in all leads, lifts and other incidental as per direction of Engineer-in-Charge.