Construction of Ayurvedic Health centre at Badgaon District Mandi

Amount

Cutting in earth work in all kinds of soil such as pick work , jumper work, pick jumper work, pick jumper blasting work, jumper blasting work, blasting work (soft and hard rock) conglomerate rock including/ chiseling wedging out of rocks (where blasting is prohibited), saturated soil and their intermediate classification of soil including ramming and de-watering where required as per the geometrics, grades and levels shown on the drawings, including clearing of jungles uprooting of trees, vegetation, grass wood trees and sapling of all girth upto any heights/depths and removal of rubbish up to any distance outside the periphery of the area including staking the useful material along the road side and disposal of all unserviceable materials through all modes of transportation with in all leads and lifts. Any loss to public or private property during the course of execution shall be the responsibility of the contractor, which shall have to be duly compensated by him at his own cost in all cases to the extent of the damages occurred as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within any leads including carriage of materials with in all leads, lifts and other incidentals.

Excavation in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering and disposal of all surplus excavated earth, up to all leads, lifts and through all modes of transportation, disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded crushed stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing weep holes in block masonry/ stone masonry/ plain reinforced concrete abutments wing wall, return wall with 100mm PVC pipe extending through the full width of the structure with slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1203.3.7 including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Sides and soffits of beam haunching, cantilevers bressumers and lintels any hight and depth in all floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses , plinth and string courses and the like.

Edges of slabs and breaks in floors and walls in any width.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals.

Stone filling behind retaining walls including carriage of materials with in all leads, lifts and other incidentals.

Stone soling / boulder filling dry hand packed in under floor including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry (un-coursed/ brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1 : 6 : 12 ( one cement : six sand : twelve graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level including racking out joints in cement mortar 1: 6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying damp proof courses 38mm (thirty eight millimetre) thick with cement concrete 1 : 2: 4 (one cement : two sand : four graded stone aggregate 12.5mm nominal size) and curing complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded crushed stone aggregate 40mm nominal size) mechnically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying M- 20 (twenty) grade cement concrete work mechanically mixed and vibrated with minimum cement contents of 320 Kg. (three hundred twenty Kilogram) per cubic metre with graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work including carriage of materials with in all leads, lifts and other incidentals

Foundation, footings bases of columns etc. and mass concrete.

Vertical surface such as wall any thickness including attached pilasters, buttress, plinth and string courses etc. from top of foundation upto all floor level.

Suspended floors, roofs, landing, shelves and their supports, balconies, beams, girders, bressumers and cantilever upto floor all level.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement : six sand) second class bricks including carriage of materials with in all leads, lifts and other incidentals.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Half brick masonry in common burnt clay building bricks in cement mortar 1: 4 (one cement : four sand) second class bricks in super structure upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters purlins connected to common rafters and the like including carriage of materials with in all leads, lifts and other incidentals.

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In R.S. joists, channels, angles, tees including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railing, brackets and similar works including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 150mm (one hundred fifty milimetre) dia pipes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC accessories for rain water pipes including filling the joints with adhesive PVC plain bend 150mm (one hundred fifty millimeter) dia including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall facs PVC (D-plast) accessories for rain water pipse including fitting the joints with adhesive complete PVC shoe 100mm (hundred millimetre) dia pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. BP sheet 1.66mm (One point six six millimetre) to 2mm (Two millimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing angle iron door, windows, clerestory window frame manufactured from steel iron section of 40x40x6mm (forty into forty into six millimetre) thickness including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood shutters, panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows and including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows ,clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 35mm (thity five millimetre) thick including black enamelled M.S. butt hinges flush door shutters including black enamelled M.S. butt hinges interior grade, commercial type, core of black board construction with frame of first class hard wood and wall matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade colour and with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

250x10mm (two hundred fifty millimetre into ten millimetre).

150x10mm (one hundred fifty millimetre into ten millimetre).

Providing and fixing aluminum handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

125mm (one hundred twenty five millimetre).

100mm (one hundred millimetre).

Providing and fixing 100mm (hundred millimetre) bright finished brass door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) oxidized MS single acting spring hings bright finished with necessary screws etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing M.S. hooks and eyes 200mm (Two hundred millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing brass curtain rail with rollar stop ends and brackets in pelmats mished of wooden curtan rod 25 mm dia and brackets of 1st class devdar wood.(actual lanth)of rails to be measured including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board in shelves/box for cub board with butt jointing and fixing with nails and screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 1.00mm (one point zero millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete in all respect including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 75mmx60mm (Seventy five into sixty millimetre) rounded hand rail in straight length complete in 2nd class Deodar wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Duro stone vitrified tiles 300 x 300mm x 10mm (three hundred millimetre into three hundred millimetre into ten millimeter) in grey/colored or of approved shade in flooring, treads of steps and landing on a bed of 12mm (Twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Duro stone vetrified tiles 300x300x8mm (three hundre into three hundred into eight millimetre) in grey/colored or of approved shade in skirting/dado laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimetre) thick in skirting risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab 25mm (twenty five millimetre) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying red sand stone slab flooring 40mm (forty millimetre) average thick on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

6mm (six millimetre) cement plaster to ceiling in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (Fifteen millimeter) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand ) including carriage of materials with in all leads, lifts and other incidentals.

White washing with lime on undecorated ceiling surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter including carriage of materials with in all leads, lifts and other incidentals.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool and sand paper complete with readymixed priming paint brushing seal lead red oxide/zinc oxide chrome (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing finish oil grease to give as even shade including cleaning the surface of oil dirt- dust and other foreign matter (Enamel paint other than white) (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 brushing including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping with enamel paint other than white (Nerolac/ Asian /Shalimar) including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement and curing complete as per standard design including carriage of materials with in all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 (fifty) grade including border of kurb block grey of coloured over sub-base of concrete with 25mm (twenty five millimetre) thick average thickness of cement mortar 1:4 (one cement : four sand) lain over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing rubbing & polishing complete (sub base concrete floor to be paid for separately) 60mm (sixty millimetre) thick block including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china water closet squatting pan (Indian Type -W.C. Pan) size 580mm (five hundred eighty millimetre) (earth work, bed concrete foot rest and trap to be measured and paid for separately) Orissa pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash down water closet (European Type W.C. Pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (sheet and over to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Ordinary closet

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 630X450mm (Six Hundred Thirty into Four Hundred Fifty millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 550x400mm (five hundred fifty into four hundred millimetre) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (Waste pipe to be measured and paid for separately) Flat back type of size 430x260x350mm (four hundred thirty into two hundred sixty into three hundred fifty millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT Colored /white high density polyethylene/poly propylene 10 (ten) liters capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) nominal bore.

20mm (twenty millimetre) nominal bore.

Providing and fixing 32mm (Thirty two millimeter) dia diametre C.P. brass waste for wash basin or sink of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass Angle valve without nuts and pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass bib tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head (15mm dia) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. stop cocks including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.I. union for wash basin or sink 32mm (thirty two millimetre) dia size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetre) dia C.P. bottle trap for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully floor or Nahni trap including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (Hundred millimetre) sand cast iron size 'P' or 'S' trap for water closet (Squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement : one sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing G.I./M.I. union (where not including in the items) complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) nominal bore.

20mm (twenty millimetre) nominal bore)

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded crushed stone aggregate 40mm nominal size inside plastering 15mm (fifteen millimetre) thick with cement mortar 1 :3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded crushed stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800x800 and 500mm (eight hundred into eight hundred and five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal diamensions total weight of cover and frame to be not less than 38Kg. (thirty eight kilogram) weight of cover 23Kg. and weight of frame 15Kg. (fifteen kilogram) with 300mm (three hundred millimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection and 15mmdia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank including carriage of materials with in all leads, lifts and other incidentals.

Supplying cast iron cover without frame for chamber for frame of internal dimension 455x610mm (four hundred fifty five into six hundred ten millimetre) rectangular C.I. cover (light duty single seal pattern-1) the weight of cover to be not less than 23 Kg. (twenty three kilogram) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC cowl complete including carriage of materials with in all leads , lifts and other incidentals.

Devesh Construction

NITESH THAKUR