Supply, Installation, Testing and Commissioning of LED Street Light Poles and allied works from Bus shelter near Mallya Gate to Ambedkar Statue near Panambur Circle

Design, Fabricating, supplying and erection of 5 Mtrs long hot dip Galvanized Octagonal Street light Poles with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCB’s as per IS specifications suitable to withstand the wind speed of 47m/s for Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130mm, top 70mm with 3mm thick, suitable base plate200x200x12mm, PCD 200 and foundation bolts M16X600mm long 4 no’s“J” bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123and 153 etc. (excluding foundation) as per drawing appended. a) 5m-Top 70mm and Bottom 130 mm dia. As per Technical Specifications

Supplying and fixing of Hot dip Galvanized half round curved Bracket with 500mm length made up of 25mm tube section and supports welded to the pole cap suitable for mounting outdoor Luminaries.

Providing foundation for 5mtrs Octagonal pole including Earth Excavation and making of RCC foundation using M20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. (All supply materials included in this item).

Supply and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 volts as per IS-694:1990. a) 3CX2.5 sq.mm

Supplying of 1.1KV insulated, PVC extruded inner sheath Armoured LT UG Cable as per IS-1554(Part-I) or IS-7098(Part-I) Armouring strip thickness and resistivity as per IS-3975. a) 4C X 16 sq.mm

Supplying of 1.1KV XLPE insulated, PVC extruded inner sheath Armoured LT UG Cable as per IS-1554(Part-I) or IS-7098(Part-I) Armouring strip thickness and resistivity as per IS-3975. a) 3.5C x 35 sq.mm

Supplying of 1.1KV XLPE insulated, PVC extruded inner sheath Armoured LT UG Cable as per IS-1554(Part-I) or IS-7098(Part-I) Armouring strip thickness and resistivity as per IS-3975. a) 3.5C x 70 sq.mm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 4C X 16 sqmm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 3.5C X 35 sqmm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 3.5C x 70 sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 4Cx16 Sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 3.5Cx35 Sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 3.5Cx 70 Sq.mm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and depth up to 1 Mtr including trial pit, depositing on bank up to a lead of 50 Mtr. Supplying and displaying necessary danger boards and lighting, using sight rails and sign boards at every 100 Mtr wherever necessary as directed. a) Hard Soil

Removing and relaying the Railway ballast to facilitate the MCF Railway track.

Supplying and fixing of Class B GI pipe as per IS-1239. a) 50mm size

i) Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job. a) 40mm OD/32mm ID.

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job. a) 63mm OD/50mm ID.

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare diffuser with injection moulded polycarbonate/clear glass material’ delivering superior light output Rated life burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT>5500K, IP 66 optical and electrical compartment @ impact resistance of complete luminaire >IK08. Power factor >0.9 with mains, Surge Protection- Min 5KV along with over voltage/overload/short circuit/miss wiring protection. Compatible for pole mauling with outer dia 40mm to 50mm. Un20iversal voltage driver to operate wide voltage range from 100 V to 270V, 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with system Power consumption. LED Efficiency >130 lm/w, nominal CRI>75.Luminaire should be accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark/ name shall be Engraved /Embossing on the die cast housing/ Body part Warranty of 2 Years of against any manufacturing defect working under Standard electrical conditions as mentioned above should be given by LED manufacturer. a) 100W LED floodlight luminaire As per technical Specifications.

Fixing and wiring of 100W LED Flood Light fittings with suitable clamps brackets, lamps, bolts and nuts and wiring to 5Mtrs long Octagonal poles.

Supply and Installation/Fixing /Provision of Pole box with HRC fuse/ MCB provision and suitable connector/terminal for 3PH/1Ph connection with loop in and loop out 2.5 sqmm 2cor Al/Cu PVC insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65 (Weather proof), rust proof, dust proof, water proof having internally embedded gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets. a) 260mmx210mmx116mm

Supply and fixing of Spiral earthing Electrode as per standard technical specifications as per ESCOM.

Supplying and fixing of street light timer box of size 300x600x170mm made of thermoplastic modular panel with lid, shock proof, IP 65 having internally embedded gasket on both lid and flap with hylum sheet, din rail with 10sqmm copper wire as complete and consisting of following components, a) 63A TPN MCB-1 No b) MNX 40A 4-pole Contactor-1 No c) 20A TPN MCB-2Nos d) 24 Hrs Time swtch-1 No. e) 40A Connectors-10 Nos.

Supplying, fixing and wiring earth electrode for panel using 40 mm dia, 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 150mm all-round with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running GI strip for grounding connections, using necessary fixing materials as required. a) 25 x 6 mm GI strip

Supply and Installation of Cable Route Marker made up of RCC block of size 100cm (H) X 50cm (W) X 6cm (D) indicating Embossed text as NMPA LT Cable with Yellow paint and Red colour letters are fixing with cement concrete.