RESURFACING OF ROAD TO MT PARK AT SRC RAMGARH CANTT

Amount

M&L Repair to pot holes any depth, n.exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edge to at least 25 mm in depth, making good by filling in screened & graded road metal, watering, well ramming, compacted and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed.

M&L of preparation of existing black top surfaces by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and applying a priming coat of bitumen primer @ 5 kg/10 sqm of VG-10 grade bitumen complete all as specified.

M&L Premix bituminous, macadam, laid/ rolled and compacted to required gradient and camber ( consolidated) thickness 75 mm or less using paving bitumen of grade VG-30 as binder @ 4% by weight of total mix using mechanical paver and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed. Note :- Mixing shall be done in hot mix plants

M&L Bituminous premix asphaltic semi-dense concrete 40mm thick consolidated thickness with 5.5% binder content (VG-30) by weight of total mix rolled and compacted to required camber and gradient, complete all as specified and directed. Note :- Mixing shall be done in hot mix plants

M&L for road marking paint exc 10cm width (white or Golden yellow ) with hot applied thermoplastic paint 2mm thick having clear and sharp edges over road surfaces including straighting portion, curve etc in any situation. The thermoplastic material shall be homogeneously composed of aggregate pigment resin and glass reflector rizing beads in equal percentage as specified. The work include for cleaning of road surface, heating the paints within temperature limits as specified by the manufacturer making proper arrangement for traffic during operation etc conforming to specification.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness above or below ground level including removing demolished materials, to a distance n. exc 50m and depositing where directed complete all as specified and directed by Engr-in Charge

M&L for Plain Cement Concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in ramps, coping, road pavements, cast in panels, finished even and fair complete all as specified and directed by Engr-in-Charge.

Forming contraction/dummy joints of 65 mm x 10mm wide primed & filled with sealing compound of bitumen (VG-10) & sand 1:3 mix, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work masonry built in cement mortar incld all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work with old size sub class ‘B’ bricks, straight or curved on plan, exc. 6m means radius, built in CM 1:6 complete all as specified and as directed

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6), surface finished even & fair without using extra cement complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed.

M & L for pre-cast RCC slab type B1 (1:2:4) for manhole cover set in CM (1:6) etc complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking columns hoping ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia on securing with dips complete all as specified and directed.

Modernage Constructions Pvt. Ltd.