Various work required for increasing capacity of 132KV S/s, Bazpur from 1x80 and 1x40 MVA to 2x80 MVA and of 132KV S/s, Ramnagar from 1x20 and 1x40 MVA to 2x40 MVA under OandM Division, PTCUL, Kashipur

Amount

250 KVA, 33 KV/0.415 KV, 3-phase transformer including bushing and all its accessories and first filling of oil complete.

33 KV Fuse set.

MS Flat 50X6 mm.

MS Flat 75X12 mm.

MS Round 40 mm Dia.

40 mm MS 03 meter electrodes.

ACSR Moose Conductor.

120 KN Disc insulators.

Rigid spacer for ACSR twin moose.

Bolted type tension fitting/gun fitting suitable for twin ACSR Moose conductor.

C-wedge clamps suitable for ACSR Moose to Panther conductor.

C-wedge clamps suitable for ACSR Panther to Panther conductor.

C-wedge clamps suitable for ACSR Moose to Zebra conductor.

C-wedge clamps suitable for ACSR Moose to Moose conductor.

C-wedge clamps suitable for ACSR Zebra to Zebra conductor.

132 KV Isolator clamp suitable for ACSR twin Moose conductor.

GI Lattice structure including Anchor bolts & GI nuts & bolts.

145 KV SF-6 circuit breaker (3-phase) alongh with support structure.

145 KV Isolator (Mettalic and Insulator), 3-phase, complete with one E/S.

145 KV Isolator (Mettalic and Insulator), 3-phase, complete without E/S.

145 KV Tandom Isolator (Mettalic and Insulator), 3-phase, complete without E/S.

132 KV control and relay panel for TBC.

120 KV Disc Insulators.

ACSR Zebra Conductor.

Bolted type tension fitting/gun fitting suitable for ACSR Zebra conductor.

132 KV Isolator clamp suitable for ACSR Zebra conductor.

132 KV Tandon Isolator clamp suitable for ACSR Zebra conductor.

C-wedge clamps suitable for ACSR Zebra to Panther conductor.

C-wedge clamps suitable for ACSR Moose to Zebra conductor.

C-wedge clamps suitable for ACSR Zebra to Zebra conductor.

132 KV Circuit breaker clamps suitable for ACSR zebra conductor.

Control Cable Copper (PVC).

2x2.5mm (Armoured).

4x2.5mm (Armoured).

6x2.5mm (Armoured).

10x2.5 mm (Armoured).

MS Flat 50x6 mm.

Nitrogen Injection Fire Prevention & Extinguishing System complete with accessories.

145 KV, 5-Core C.T (1-phase) ,200/100/1 A, accuracy class 02.S with Junction Box.

36 KV CT 800/400/1 A (0.2S accuracy class) without junction box along with CT connectors.

Junction box for 36 KV CT.

33 KV Isolator clamps suitable for ACSR Zebra conductor.

33 KV circuit breaker clamps suitable for ACSR Zebra conductor.

33 KV CT connectors suitable for ACSR Zebra conductor.

33 KV bushing clamps suitable for ACSR Zebra conductor for LV side of transformer.

33 KV LA clamps suitable for ACSR Zebra conductor.

C-wedge clamps suitable for ACSR Zebra to Zebra conductor.

MS Flat 50x6 mm.

MS Flat 75x12 mm.

MS Round 40 mm Dia.

ACSR Zebra Conductor.

Flexible copper bond.

GI Lattice structure including Anchor bolts & GI nuts & bolts.

Description of Work / Item(s)

Amount

Dismantling of old 40 MVA, 132/33 KV transformer and its accessories after draining of its oil in empty drums, opening of all jumpers, disconnection of earth strips and dismantling of its RTCC panel, control & relay panel etc. Filling with nitrogen gas in emptied transformer after vaccumising it.

Dragging, loading, cartage of 40 MVA T/F , T/F oil and its accessories such as RTCC panel, oil drums from 132 KV Sub-station Bazpur to 132 KV Sub-station Ramnagar including unloading of 40 MVA T/F at 132 KV S/S Ramnagar and shifting to plinth complete.

Erection of 33 KV Fuse set.

Erection, commissioning, testing of 250 KVA, 33 KV/0.415 KV ,3-phase transformer including all its accessories and filling of transformer oil after centrifuging and attaining required BDV.

Earthing of all structures & equipments with MS flat including Painting of all earth strips of all equipments with two coat of green enamel paint after applying one coat of redoxide primer all work as per direction of Engineer-in-charge.

MS Flat 50x6 mm.

MS Flat 75x12 mm.

Extension of earthmat, laying of 40 mm M.S. Round and jointing with earthmat by welding of riser with 40 mm M.S. Round at least 0.6 Mtr. below the ground, delta earthing of transformer etc complete.

Erection of 40 mm MS 03 meter electrodes.

Dismantling of exixsting 250 KVA, 33 KV/0.415 KV ,3-phase station transformer including all its accessories, cables etc.

Dismantling of 33 KV fuse set complete.

Dismantling of existing plinth of 250 KVA, 33/0.415 KV station T/F and dismantling of existing fire hut complete.

Dismantling of old 145 KV CTs including its safe cartage from switchyard to store at 132 KV Sub-station Bazpur.

Dismantling of old 120 KV LAs including its safe cartage from switchyard to store at 132 KV Sub-station Bazpur.

Dismantling of old 145 KV Post insulators including its safe cartage from switchyard to store at 132 KV Sub-station Bazpur.

Dismantling of old strcuture of 145 KV Post insulators,120 KV LAs, 33 KV fuse set etc including its safe cartage from switchyard to store at 132 KV Sub-station Bazpur.

Dismantling of old 132 KV ACSR Single Deer/Panther main bus after opening all jumpers/droppers of various feeders/bays, gun fittings, Disc Insulators,isolator clamps ,C-wedge clamps etc. including shifting the dismantled items to store as per direction of Engineer-in-charge.

Laying,Cutting, Stringing ,Tensioning, clamping, jointing etc. complete with ACSR Twin Moose conductor including hoisting of Disc insulators,gun fittings, spacers and fitting various clamps & connectors such as C-wedge clamps,isolator clamps, Etc for 132 KV main Bus Bar.

Bus Bar jumpering/droppers of all 132 KV bays from 132 KV ACSR Twin Moose main bus to bus isolators,PTs etc. with suitable clamps and connectors required as per site conditions for proper completion of work.

Earth work in excavation by mechanical means(Hydraulic excavator) /manual means in foundation trenches or pits of any size including earth filling, dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed,including all heads and lifts. (all kinds of soil).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering -All work upto plinth level 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

Cement concrete 1:2:4 (1 cement :2 coarse sand:4graded stone aggregate 20mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and timping complete as per direction of engineer in charge.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level including cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S (non modular) of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand).

12 mm cement plaster of mix 1:4 (1cement : 4 fine sand).

Structural steel work riveted bolted or welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position applying a priming coat of approved steel primer all complete.

Steel reinforcement for RCC work including starightening, cutting , bending, placing in position and binding all complete upto plinth level : Cold twisted bars.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Supply and spreading of earth by earth work in excavation by mechanical/manual means over one side of revetment wall ,in layer not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering including all lead lifts (land of earth supply to be arranged by contractor at his own cost).

Providing and fixing of best quality Kota stone flooring of size (18" X 18") over 20mm (avarage) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the floor, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement :4 fine sand) in 25 mm thick base.

Fixing of Indoor Luminaires LED, 20 Watt recessed lights including supply and fixing of PVC condiut flexible pipe, JB switch and distribution board, ELCB and 2.5mm copper multi core cable, with tagging etc completion in all respect as per direction of Engineer Incharge.

Proving and fixing of False ceiling of control room, carrier room etc with insulated back alluminium coil or metro or equivalent make in but textured tiles with approved surface pattern of size 600X600mm having noise reduction property, light reflection over 75% humidity resistant, fixing to the structure by butterfly clip hanger, suspention wires and anchor fastener as per manufacture's specification of good quality. The work includes providing & fixing of Aluminium composit panel (ACP) with glass in old aluminimum window and other places for covering of open space with the help of suitable joint etc including providing and fixing of pelmets and curtains as per requirement and other associated work to complete the job satisfactorily.

Distempering with first quality acrylic distemper (ready mixed) apply two coat having voc contant less than 50gram/liter,of approved manufacture of required shade and colour complete,as per manufacture specification including all material, labour cost and T&P.

Dismantling of existing wall, windows etc. of control room safely including disposal of waste at an unobjectionable place as per direction of Engineer-in-charge.

GI Lattice structure including Anchor bolts & GI nuts & bolts.

Laying, Cutting, Stringing, Tensioning, clamping, jointing etc. complete with ACSR Zebra conductor including hoisting of Disc insulators,gun fittings, spacers and fitting various clamps & connectors such as C-wedge clamps, isolator, clamps etc. for 132 KV Transfer Bus Bar .

Erection, Testing and commissioning of 145 KV SF-6 circuit breaker including dismatling of old cables and connections.

Erection of 145 KV Isolator (Mettalic and Insulator), 3-phase, complete with one E/S.

Erection of 145 KV Isolator (Mettalic and Insulator), 3-phase, complete without E/S.

Erection of 145 KV Tandom Isolator (Mettalic and Insulator), 3-phase, complete without E/S.

Erection of 145 KV Post insulators.

Erection,commissioning, testing of 132 KV control and relay panel for TBC.

Providing and fixing of protection transfer switches (PTS) and its integration in existing panels ,including its wiring, laying of cable, ferulling tagging all complete as per direction of Engineer-in-charge.

Bus Bar jumpering/droppers of all 132 KV bays from 132 KV ACSR Zebra Transfer bus to Tandom isolators,CB, Isolaotrs, CTs etc. with suitable clamps and connectors required as per site conditions for proper completion of work.

Earthing of all structures & equipments with MS flat including Painting of all earth strips of all equipments with two coat of green enamel paint after applying one coat of redoxide primer all work as per direction of Engineer-in-charge.

MS Flat 50x6 mm.

Complete laying,ferulling and preparing cable schedule of Armoured Control Cable/Power Cable.

2x2.5mm (Armoured).

4x2.5 mm (Armoured).

6x2.5 mm (Armoured).

10x2.5 mm (Armoured).

Dismantling of old 145 KV Post insulators including its safe cartage from switchyard to store at 132 KV Sub-station Bazpur.

Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or pits of any size including earth filling, dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed,including all heads and lifts (all kinds of soil).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering -All work upto plinth level 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

Cement concrete 1:2:4 (1 cement :2 coarse sand:4graded stone aggregate 20mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and timping complete as per direction of engineer in charge.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level including cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S (non modular) of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand).

12 mm cement plaster of mix 1:4 (1cement : 4 fine sand).

Structural steel work riveted bolted or welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position applying a priming coat of approved steel primer all complete.

Steel reinforcement for RCC work including starightening, cutting, bending, placing in position and binding all complete upto plinth level : Cold twisted bars.

Dismantling of old 20 MVA, 132/33 KV transformer after draining of its oil in empty drums, opening of all jumpers, disconnection of earth strips and dismantling of its RTCC panel and its safe carriage from switch yard to suitable place .Filling with nitrogen gas in emptied transformer after vaccumising it.

Erection, testing, commissioning of 40 MVA ,132/33 KV T/F on plinth inclunding cartage of transformer to plinth by dragging , erection of marshalling boxes,electrical connections, centrifuging and filling of oil,erection commissioning of RTCC panel its earthing and other associated works required for proper energization of transformer as per direction of Engineer-in-charge.

Erection, commissioning, testing of Nitrogen Injection Fire Prevention & Extinguishing System and its all accessories complete as per direction of Engineer in charge

Erection of Lattice type structure along with Anchor bolts, nuts & bolts complete

Erection, commissioning, testing of 145 KV, 5-Core C.T (1-phase), 200/100/1 A, accuracy class 02.S with Junction Box as including modification of its base structure as per site requirement per direction of engineer incharge.

Erection, commissioning, testing of 36KV CT 800/400/1 A (0.2S accuracy class) with junction box including modification of its base structure as per site requirement as per direction of engineer incharge.

Erection of 33 KV LA after extension of height of its structure to ensure proper clearance including its earthing.

Jumpering work of all equipments with suitable clamps and connectors after cutting ACSR Zebra/Panther conductor of required size,dismantling of old jumpers/strings and shifting to store as per site conditions for proper commissioning of work .

Earthing of all structures & equipments with MS flat including Painting of all earth strips of all equipments with two coat of green enamel paint after applying one coat of redoxide primer all work as per direction of Engineer-in-charge.

MS Flat 50x6 mm

MS Flat 75x12 mm

Extension of earthmat ,laying of 40 mm M.S. Round and jointing with earthmat by welding of riser with 40 mm M.S. Round at least 0.6 Mtr. below the ground, delta earthing of transformer etc complete

Dismantling of old 145 KV CTs including its safe cartage from switchyard to store at 132 KV Sub-station Ramnagar

Dismantling of old 36 KV CTs including its safe cartage from switchyard to store at 132 KV Sub-station Ramnagar

Dismanting of 33 KV LAs safely.

Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or pits of any size including earth filling, dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed,including all heads and lifts. (all kinds of soil)

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering -All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level including cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Cement concrete 1:2:4 (1 cement :2 coarse sand:4graded stone aggregate 20mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and timping complete as per direction of engineer in charge.

Brick work with common burnt clay F.P.S (non modular) of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand).

12 mm cement plaster of mix 1:4 (1cement : 4 fine sand )

Centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.

Description of Work / Item(s)

Amount

Total Part-A (Supply ) from BoQ1 sheet WITHOUT GST

Total Part-B (Erection) from BoQ2 sheet WITHOUT GST

Add GST* Amount on (Total of Part-A + Total of Part-B above)

Lashani Enterprises (BID ID -377143)

SHANZ POWERTECHS PVT LTD (BID ID -377401)

Lashani Enterprises (BID ID -377143)