Repair to floor, plaster, roof ceiling, joinery, sanitary fittings, painting, sewage line, path drain and internal electrification of 2/9 GR at Ghunghora and Beacher under AGE B/R-I of GE Dehradun.

Amount

M&L for preparing of old decorated surfaces of walls using steel wire brushing and hand held electrical grinder and applying one coat of cement base paint complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old decorated surfaces of walls using steel wire brushing and hand held electrical grinder and applying two coats of cement base paint complete all as specified & directed by the Engr-in-Charge.

M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of PU paints complete all as specified & directed by the Engr-in-Charge. .

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old AC sheet surface by steel wire brushing and washing with water and applying one coat of exterior emulsion weather resistance paint , complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls, chajja, facia etc, using steel wire brushing and hand held electrical grinder and applying one coat of weather proof exterior emulsion paint complete all as specified & directed by the Engr-in-Charge.

M&L for 2-3mm thick wall care putty on wall surfaces finished even and smooth complete all as specified and directed.

M&L for 2-3mm thick wall care putty on ceiling surfaces finished even and smooth complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls using steel wire brushing and hand held electrical grinder and applying one coat of distemper oil emulsion white or tinted complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old decorated surfaces of walls using steel wire brushing and hand held electrical grinder and applying two coats of distemper oil emulsion white or tinted complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old decorated surfaces of ceiling using steel wire brushing and hand held electrical grinder and applying two coats of distemper oil emulsion white or tinted complete all as specified & directed by the Engr-in-Charge.

M&L for complete removal of treatment from old decorated surfaces of walls, chajja, facia etc, using steel wire brushing and hand held electrical grinder, applying 2-3mm thick wall care putty on wall surfaces finished even and smooth and two coats of weather proof exterior emulsion paint over a coat of alkali resistant primer complete all as specified & directed by the Engr-in-Charge.

Returning filling in any type of soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. (Surplus soil shall be left proud and dressed over the trench)

Removing /cutting trees, vegetation, digging out roots from concrete or brick surfaces on wall/roof/cajja etc, filling holes and making good with cement concrete (1:2:4) type B-0 or CM (1:3) complete all as specified and directed.

Taking down of cement plaster of any description on brick/stone wall,etc including racking out joints hecking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick cement plaster in cement mortar (1:6) on fair face of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick cement plasteron other than fair face of brick/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:4 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on walls complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed (using old size bricks)

All as per item no 22.00 here in above, but except bricks complete all as specified. (Old bricks shall be reused obtained from item No 21.00 here in above)

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150 mm bore set in cement mortar including PCC benching complete all as specified and directed.

M&L 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar (1:1), complete all as specified and directed.

M&L for concrete bed in PCC (1:4:8) type D-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. Make : ECHON/Kumar Tech/Sintex

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge. Make : ECHON/Kumar Tech/Sintex

S&F 100 mm size cadmium plated stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F 300mm long MS sliding door bolts ISI marked bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC sheet complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC sheet complete all as specified and as directed.

M&L for machine pressed precast cement concrete interlocking paver block, prepolished, coloured, any shape and size confirming to IS 15658-2006, of 60mm tickness, M-35 grade, in floors laid dry over 25mm sand cushion and joints filled with sand including dismantling all as specified all as directed by Engineer-in-Charge.

M&L for Non skid heavy duty vitrified tiles 300x 300 x 10 mm thick as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles incl screed bed of 20 mm thick in CM (1:4) including dismantling all as specified all as directed by Engineer-in-Charge..(Make : Johnson Endura/ Somany )

M & L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

Demolition of cement concrete (unreinforced)ground floor and paving n. exc 15mm thick below or above ground level including floor tiles etc.

M&L 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggrate) as in floor/roof finished conc surface even & fair without using extra cement complete all as specified and directed.

M&L Vitrified ceramic tiles10 mm thick (square/rectangular) polished area of each tile n.exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick in cement mortar (1:6) including dismantling all as specified all as directed by Engineer-in-Charge.

S&F viterified ceramic tiles 10mm thick n.exc 0.36 Sqm each in verticle surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) including dismantling all as specified all as directed by Engineer-in-Charge.

M&L for glazed coloured ceremic tiles 250x375x7 mm in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm thick plaster in cement mortar (1:6) including dismantling all as specified all as directed by Engineer-in-Charge.

M&L for 18mm thick granite work (of any shade, table rubbed and polished) in pillars, window cills, platforms etc laid in CM (1:2) and pointing with white cement and marble dust (1:2) with admixture of pigment to match with shade of granite, grinding, polishing and rounding off edges incl screed bed of 20 mm thick in CM 1:4 complete all as specified and directed.

S&F in repair bottle trap of CP brass any size (half or full threaded) including 40 mm GI pipe and complete fitting all as specified and directed by Engr-in-Charge. Make : Hindware Cat Part No F850004/Prayag Cat Part No BEF-21/12

S&F in repair half stall vetrious china urinals (wall type) complete incl plugs, bedding urinal to walls with and incl 60 mm long brass screws, pointing around urinal back in cement including union for discharge pipe and waste pipe. Make : parryware CAT Part No EWHIZ size 360x345x565/Hindware vinenzia CAT Part No. 60012 Stan white pastel size 31.5x34.5x66cm/Jaguar/URS-WHT-13263 size 340x310x660 mm

S&F in repairs frosted glass urinals partition of size 310x700 mm 10 to 12mm thick terminating about 50 cm above floor lines complete all as specified and directed by Engr-in-Charge

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

M&L 100 mm thick Cement concrete type B-2, (1:2:4) (using 40mm grade stone aggregate) as in hard standing /path complete all as specified and directed.

M&L cement concrete 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate) as in floor finished even and smooth with using extra cement.

S&F in repair 25 mm dia SS 304 drapery rod decorative with wooden finish, decorative, including brackets, decorative finials at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

S&F powder coated aluminium door with frame and shutter and glazing 5 mm thick tinted glass and 12 mm thick prelaminated particle board exterior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary etc. section of aluminium door shall be of following sizes:- Top : 85x44.5x1.20 mm thick fixed with rawal plug Width: 85x44.5x1.20 mm thick Bottom :112x44.5x1.20 mm thick Style: 85x44.5x1.2 mm thick Glazing beading: 0.70 mm thick Aluminium handle 'D' type: 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever, Aluminium stopper cleat Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed. (ii) PCC shall be measured and paid seperatelly.

S&F powder coated aluminium window double shutter with frame and shutter and glazing/ wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc.complete all as specified and directed. Aluminium sections shall be of size as given below:- Frame : 85x44.5x1.20 mm thick with rawal plug Style: 44.5x44.5x1.20 mm thick Glazing beading: 0.70 mm thick Aluminium handle 'D' type: 100 mm Aluminium tower bolt 9.9 mm dia shoot 150 mm long Glass: 5 mm thick frosted / plain glass (as specified) Wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of aperture 1.40 mm Hinge 100mm aluminium powder coated

S&F in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed.

S&F in repair aluminium door closer hydraulically regulated designation No. 1 universal type suitable for door shutters upto 900mm in width and of weight not more than 35 Kg complete all as specified & directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

S&F 18 to 20 mm thick solid PVC board as in cupboard shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet including suitable aluminum channel guiding runners with and including suitable PVC frame as per specification and including taking down of old shutter complete all as specified and directed.

Dismantling of fillets, rails posts, rafters, purlins, etc. under 40 sq cm in section framed complete all as specified and directed.

S & F of rolled mild steel sections as in roof trusses (framed) trussed purlins, crane gantries rails fastening and heavy brackets framing (beam TEE angle channel or flat sections ) and distance pieces, cleats etc including cutting welding etc conforming to Fe -410-W (Gde E 250 ) quality B complete all as specified and directed.

Demolition of reinforced cement concrete of any description not other wise mentioned complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore complete all as specified and directed

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore complete all as specified and directed

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15 mm bore GI tubing.(old steel tubing obtained from item No.66.00 here in above shall be re-used)

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20 mm bore GI tubing.(old steel tubing obtained from item No.67.00 here in above shall be re-used)

S&F in repair PVC, white, low level flushing cistern 8 ltr capacity with all fittings syphonic action with inlet ball valve and float with & including PVC flush pipe 32 mm bore complete all as specified and directed

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar Cat part No.CON-011KN and equivalent

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair CP concealed stop cock fancy type cast copper alloy, screwed down both ends for high pressure, suitable for 15mm dia iron pipe all as directed.

S&F in repair 15mm dia brass chromium plated centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar CAT Part No SOL-6001B/Hindware CAT Part No F450009/Parryware CAT Part No G0665A1

S&F in repair chromium plated health faucet, hand shower type with pipe & wall hook complete all as specified and directed. Make : Parryware CAT Part No T9941A1(Cardiff with SS hose & hook (brass))/Hindware CAT Part No. F160013/Jaguar CAT Part No ALD-573

S&F in repair CP Jet spray for EWC with PVC pipe minimum 1mtr long complete fitting all as specified.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern)(cascade) , white including flushing cistern, plastic water closet seat, white, closed pattern with flat bottom, and cover complete all as specified and as directed. Make : Jaguar bearing CAT Part No FLS-WHT-5351SN/Hindware CAT Part No 92098 P-21 including trap (P or S type)/ Parryware Cat Part No VERVE10269

S&F in repairs vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet sheet covers white closed pattern with flat bottom with mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed. Make: Hindware/Parryware/Jaquar

S&F in repair Vitreous China wash basin coloured counter top, flat bottom oval type complete all as specified and directed by Engr-in-Charge. Make : Jaguar CAT Part No SLS-WHT-6901 size 485x370x150/Hindware CAT Part No 91046 size 540x420x165/ Parryware Cat Part No OLAVOCO457 size 635x390x140.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)

S&F in repairs 20mm dia PTMT ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair rotational moulded polyethylene 500 Ltrs capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed including dismantling of old tank any type complete all as specified and directed.

S&F in repair rotational moulded polyethylene 1000 Ltrs capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed including dismantling of old tank any type complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes any dia, jointed in cement mortar & taking out of trenches/ floor/wall, if required complete all as specified and directed.

S&F cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or without ears jointed with polymer based epoxy laid in trenches or in floor complete all as specified

S&F cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or without ears jointed with epoxy based polymer fixed to wall complete all as specified

S&F cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears jointed with epoxy based polymer laid in trenches or in floor complete all as specified

S&F 100 mm dia CI sanitary connections of length upto 300 mm complete all as specified and directed.

M&L for grinding and polishing to achieve mirror finish on existing terrazo /stone flooring , dado skiring etc, by machine or by hand with 120 to 150 grit size carborandom stone cleaning and washing the surfaces rubbed hard with felt and slightly moistened oxalic acid powder @ 5 gram per sqm complete all as specified and directed .

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/loose soil, getting out, return filling in watering and ramming in layers not exceeding 25cm and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed. (PCC for embedding post shall be paid seperately).

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggrate) for embedding/ grouting MS posts complete all as specified and directed.

S&F mild steel work such as in angle iron, flat iron fillets etc for fixing of barbed wire and chain link fencing etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete mild steel, conforming to Fe-290 Gde E-165

Supply only chain link fencing of 4.00 mm dia wire MS galvanised fencing of any size and any type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, any size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Taking out existing roof treatment completely upto PCC surface and M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface .

Item No 99.00 contd. (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, using smart care mortar & grout covering multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer and company back guarantee will given by the contractor. Work will be executed in smart assurance system. PCC item will be paid separately.

S&F in repair solid PVC wall lining consisting of 5mm thick of wood grains PVC sheet inclusive of slovent cement and fixing to walls on PVC frame as per specifications and drawing in repair complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications and drawing complete all as specified and directed.

S&F in repair 10mm thick toughned glass door shutters of size area exc 1.50 Sqm but n exc 2.5 Sqm, including necessary floor spring hydrulically regulated, otherside fixed on pivot. CP fittings and fixtures, CP handles CP looking arrangement, necessary cuting and holes moulding including taking down existing door complete as specified and directed by Engr in Charge.

S&F in repair 10mm thick toughned glass as in partition including diamond ending all sides,eatching,lining and monograme area nexc 0.50 Sqcm each by sand blasting including CP "L" or "U" heavy duty clamps suitable for fixing of glass min 4 Nos. per RM including taking down existing partition panel complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down Chowkats exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) and removing from site complete all as specified and directed.

Dismantling fencing wire mesh, any type including RCC/ wooden posts and removing from site complete all as specified and directed.

S&F aluminium U type channel for wire mesh/grill complete all as specified and directed.

S&f power coated aluminium anoodized partition with frame (fixed type) shutter and glazing 4.8mm thick retro reflected glass and 12mm thick prelaminated particle board interior grade in bottom panel glass fixed with rubber gasket with aluminium glazing clips sizes are following:- Frame of vertical/horizantal section : 44.5x44.5x1.22mm thick. Bottom Section : 112x44.5x1.22 mm thick. Complete all as specified and directed by the Engr in charge.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggrate) as in padding/ levelling layer on roof surface complete all as specified and directed.

Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule).

(a) One light point/ bell buzzer point controlled by one, one way switch

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

(e) One light point controlled by two no two way switch.

All as per item No. 111.00 above here in but with 2.5 Sqmm. (nominal area) cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in existing steel/PVC conduit including sunken MS boxes, for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule). New top cover 3m plastic laminated sheet of size as per sunken box shall be provided and cost of the same is included in this item.

(a) One light point/ fan point controlled by one, one way switch

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch

(c) One three pin 5 Amp socket on same board

(d) One three pin 5 Amp socket on independent board

(e) One light point controlled by two no, two way switch.

All as per item No. 114.00 above here in but with 2.5 Sqmm (nominal area) wire/cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete al as specified.

S&F Bell switch paino flush button type 5 Amp complete all as specified.

S&F ding dong bell AC 230 V single pole complete all as specified and directed .

S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

S&F lamp holder,pvc/polycarbonate type with back plate suitable for batten fittings including 9w LED bulb complete all as specified & directed.

M&L sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly including taking out existing sub main wiring complete all as specified & directed.

S&F in repair sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

S&F in repair sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed.

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed.

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed.

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed. Make: Legrand/Schneider/Simens/L&T

S&F in repair wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No TMC 501P1xT LED 22WP-3241(Tube Batten) and MAS LE$D 1200mm 18W-865-T-81 (Tube) / Wipro Cat part No W10921208 (Tube Batten) L213-181-655E (Tube)/ Havells Cat Part No LHFYBYPNIAIW022 (Tube Batten) LHLDCL X EUL 83020 (Tube).

Supply & Fixing in repair and testing LED down lighter recessed mounted 2x2 feet ultra modern designed LED luminaire which provide soft light and glair free symmetrical illumination suitable for grid ceiling and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on as per Havells Cat Part no: LHECDYL7PIW036 or equivelent make of PHILIPs/ CROMPTONall as directed by Engineer-in-Charge.

S&F in repair LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F in repair LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F in repair mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size. Make Havells Cat No Edgelite or equilent in Philips/Wipro

S & F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

S&F in replacement air ventilation fan matalic body 300mm, 900 RPM, single phase, 230V AC including necessary, M&L for making fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Make:- Havells cat part No. Ventil Air DXWHT, CG cat No. BRISKAIR or equivalent Orient.Note: old unserviveable fan shall be deposite in E/M yard.

Supply and Fixing in repair Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed. Make:- Crompton model No. LSTP-45-CDL/Havells model No. ENDURAPEARLNEOSL 40WLED757PASYTOPC /Philips Cat Part No BRP409LED CW036MRFGIPSUGRand syska SSK-ST-40W including taking out old unserviceable street light.

M&L in repair for service cable 6 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed PVC insulated round suspended with No.8 SWG GI wire and reel insulators at distance of 01 mtr duly connected with earthing and clamp etc from Pole to pole complete all as specified and directed.

All as per Item No 139.00 here in above but 10x2 sq mm

S&F in replacement electronic ballast for existing tube light fitting 40/36 Watt complete all as specified and directed. Make: Bajaj/Philips/Havells

Supply and fixing in replacement of LED tube rod 18/20 Watts single or double sided connections polycarbonate complete incl making connection alteration in existing tube light fitting complete.

Disconnecting electric connection and taking down of ceiling fan / Exhaust fan removing capacitor,split pins of any sweep ceiling fan / Exhaust fans complete carefully for overhauling checking of bearings/bush, cleaning the fan blades with cleaning solution, replacing the unserviceable bearing, bush, capacitor , safety split pin and nuts, bolts, washer etc duly threaded of down rods (bush, bearing, capacitor, down rod, hanging clamps, will be paid under relevant item of the Sch 'A') reassembling the ceiling fan complete after greasing/servicing, oiling testing the same making the fan in serviceable condition and refixing/ hanging the same complete all as specified and directed by Engineer-in-Charge . Note 1: Cost of Split pins, nut bolts and threading of down rod pipe rates are included in quoted rate

Supply only fan capacitor 2.5 mfd make universal / Asian/Epcos .complete all as specified and directed

Supply only fan capacitor 4 mfd complete all as specified and directed make universal / Asian/Epcos

Dismantling electric and water connection of the 25/50 ltr's geyser, taking down from its original position on ground, dismantling geyser complete such as removing tank from its outer body, removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing its thermostat, heating element, and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, rubber gasket & testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete and testing on completion all as directed by Engineer-in-Charge. (Heating element & Aparatus if required to be replaced shall be measured and paid separately) (Nut, bolts and hold fastners if require to be replaced shall be deemed to be included in the quoted rates of this item).

Supply only heating element any type/size as per site requirement of capacity 2 KW ISI Marked. Make:-Theta/Newton/Dasmesh/Bajaj

Supply only thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make: Dashmesh/Indofors/Donfoss/Bajaj

S&F in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long for geyser complete all as specified and directed. Make:- POLO/Havells/Prayag

Supply only pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply only rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket with metal clad top and one MCB, SPN 20 amps capacity 240 volts, C Series, IP 30, mounted flush on wall and making good disturb surfaces complete all as specified and directed. Make : Legrand cat No. 5078 14/ L&T/ Simens/ Legrand.

M/s. Kansal Construction Co.

M/S C S AITHANI

kalakriti enterprises

M/s Anil Kumar

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD

Saurav Enterprises

R K BUILDERS