Construction of road from Paonta Sahib Dakpather (MDR-94) to connect bridge over Yamuna river at Navghat Bhimawala km. 0/0 to 0/650

Excavation in earth work in hilly area all heights & depths, in all kind of soil including saturated soil comprising of mixed soi, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling & wedging out rock ( where blasting is prohibited ). All earth work in cutting/excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevation and level as shown on the drawing or as directed by the Engineer-in-Charge , in conformity with the requirement of technicalspecification for Rural Road, August, 2004 and clause 16.2 of General Conditions for Contract to achieve designed formation width including hauling & stacking of materials useful for construction at suitable sites & safe disposal of unsuitable cut materials in specified manner including arrangement of dumping site, trimming, filling of unevenness, blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge for smooth riding including all leads and lifts. The recovery for stones, whether useful or not @ Rs. 300 /- ( Rupees Three hundred and paise nil ) only per Cubic metre shall be effected on prorata basis in all circumstances. Any loss to the public & private property during the course of excavation shall be absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases.The land for dumping site shall be arranged by the contractor himself and nothing extra shall be paid on his account.

Construction of embankment with approved materials deposited at site from road way cutting & excavation from drain & foundation of other structures graded and compacted to meet the requirement of Table 300.1 & 300.2 as per Technical Specification clause 301.5 including hauling of materials within all leads & lifts & other incidential charges & as per direction of Engineer-in-Charge.

Earth work in excavation for structure in all depths as per drawing & technical specification for Rural Road August 2004 clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleteruious materials & disposal in all leads & lifts including dressing of sides & bottom & back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollation etc. and to protect stability of hill side rock shall be excavated with chiselling and wedging out rock ( where blasting is prohibited ). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevation and level as shown on the drawing or as directed by the Engineer-in-Charge hauling & stacking of materials useful for construction at suitable sites & safe disposal of unsuitable cut materials in specified manner tramming filling of unevenness blindage & finishing of the road to specified dimension or as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to sping seepage rain and other causes, it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responisibility of the contractor which shall have to be duly compensated by him at his own cost in all cases.

Providing & laying plain/reinforced cement concrete Mechanically mixed & Vibrated in Sub-structure complete as per drawings & technical specification clauses 802, 803, 1202 and 1203 Plain cement concrete grade M-15 ( fifteen ) nominal mix 1:2.5:5 ( One cement : two & half sand : five graded stone aggregate ) including cost of form work & curing complete including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing weep holes in brick masonry/ stone masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia (One hundred milimeter ) PVC pipe extending through the full width of the structure with slope of I V ( One vertical ) : 20 H ( Twenty horizonuial ) towards drawing face complete as per drawing Technical Specifications clauses 614, 709, 1204.3.7 including hauling of materials within all leads & lifts & other incidential charges & as per direction of Engineer-in-Charge.

Providing & laying boulder apron laid in wire crates with 4 mm ( four milimetre ) dia G.I. wire conforming to IS: 280 & IS:4826 in 100mm x100mm ( One hundred into one hundred milimeter ) mesh ( woven diagonally including 10% ( ten percent )extra for laps & joints laid with stone boulders weighting not less than 25 ( twenty five ) kilogram each as per drawing & technical Specification clause 1301, including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete Mechanically mixed 1 : 4 : 8 ( One cement : four sand : eght graded crushed stone aggregate 40 mm ( forty milimetre ) nominal size ) for plain/ reinforced concrete work in open foundation complete as per drawing & technical specification clauses 802, 803, 1202 & 1203 including cost of form work & curing complete including all leads, lifts & carriage of materials, as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete ( Plain cement concrete grade M-10 ( Mixed design ten ) Mechanically mixed & Vibrated 1 : 3 : 6 ( One cement : three sand : six graded crushed stone aggregate 40 mm ( forty milimetre ) nominal size ) for plain/ reinforced concrete work in open foundation complete as per drawing & technical specification clauses 802, 803, 1202 & 1203 including cost of form work & curing complete including all leads, lifts & carriage of materials, as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete M-20 ( Mixed design tweny ) Mechanically mixed & Vibrated 1 : 2 : 4 ( One cement : two sand : four graded crushed stone aggregate 20 mm ( twenty milimetre ) nominal size ) for plain/ reinforced concrete work upt all height complete as per drawing & technical specification clauses 802, 804, 805, 806, 807, 1202 & 1204 including cost of form work & curing complete including all leads, lifts & carriage of materials, as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying plain/ reinforced cement concrete M-25 ( Mixed design twenty five ) mechnical mixed & vibrated in Super structure complete as per drawing & technical specification clause 800, 1205.4, 1205.5 ,in reinforcement cement concrete in all height including cost of form work & curing complete including hauling of materials within all leads & lifts & other incidential charges & as per direction of Engineer-in-Charge.

Providing & laying reinforced cement concrete pipe NP2 900mm ( nine hundred milimetre ) dia for culverts on first class bedding of granular materials in single row including fixing collars with cement mmortar 1 : 2 ( One cement : two sand ) but excluding excvavation, protection wall, back filling, concrete & masonry work in head walls & parapets as per drawing & technical specification clause 1108 including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Supplying, fitting & placing HYSD bar reinforcement in Super structure complete as per drawing & technical Specifications clause 1002, 1010 & 1202 including cost of binding wire including carriage of materials within all leads, lifts & other incidential charges & as per directionof Engineer-in-Charge.

Providing & laying flooring laid over cement concrete bedding complete as per drawing & technical specification clause 1303, Rubble stone laid in cement mortar 1:3 ( One cement : three sand ) , including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.

Preparation of sub grade by dressing to camber ( Earth work for the cutting involved for sub grade to be paid for separately depending upon the claiisification of soil ) complete as per HP.PWD., specification including haulage of materials in all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Consolidation of Sub-grade with road roller including making good the undulation etc. with earth or quarry soil etc. & re-rolling the sub-grade complete as per HP.PWD., Specification, 1990 Volume-I including haulage of materials in all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Construction of Sub-grade & earthen shoulder with approved materials obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope & compacted to meet requirement of table No. 300.2, including haulage of materials in all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.

Construction of granular Sub-base by providing well graded materials, spreading in uniform layers with tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401, for Grading-I ( one ) materials including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge.

Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mixer ( Pug mill ), plant carriage of mixed material by tipper to site, laying in uniform layers in sub base/ base course on a well prepared surface & compacting with vibratory roller to achieve the desired density, including carriage of materials within all leads, lifts & other incidentials complete as per entire satisfaction of the Engineer-in-Charge

Providing & applying primer coat with bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface & spraying primer @ 0.85 Kg/Sqm ( zero point eight five kilogram per square metre ) using mechanical means as per Technical Specification clause 502, including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge.

Providing & applying tack coat with bitumen emulsion ( RS-I ) using emulsion distributor 0.276 Kg/Sqm. ( zero point two seven six kilograme per Square metre ) on the prepared surface dry & honary bitumen surface cleaned with hydraulic broom as per Technical Specification clause 503, using mechanical means including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying bituminous macadam with hot mix plant using crushed aggregate of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all leads,lifts laid over a previously prepared surface with paver finisher to the required grade, level & alignment & roller to achieve the desired compaction as per Technical specification clause 504 , including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge. ( 50 mm thick Bituminous Macadam ).

Providing & applying tack coat with bitumen emulsion ( RS-I ) using emulsion distributor 0.276 Kg/Sqm. ( zero point two seven six kilograme per Square metre ) on the prepared surface dry & honary bitumen surface cleaned with hydraulic broom as per Technical Specification clause 503, using mechanical means including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying bituminous concrete with 100-120 TPH ( One hundred to one hundred twenty Toone per hour ) batch type hot mix plant producting an average output of 75 ( Seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5 ( five point five per cent of mix & filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level & alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause 509 complete in all respects, including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge. Nothing extra shall be paid for higher contant of bitumen as per job mix formula.

Providing & applying 2.5 mm ( two point five milimetre) thick road marking strips ( retro relective ) of specified shade/ colour using hot thoromolastic material by fully sami automatic thereoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank hitter & profile shoe hitter, driven by experienced operator on road surface including cost of materials, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease & foreign materials etc. complete as per direction of Engineer-in-Charge & accordance with applicable specification , including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing of road stud 100x100mm ( one hundred into one hundred milimetre ) die-cast in aluminum, residtant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm ( thirty milimetre ) upto a depth of 60 mm ( sixty milimetre ) and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4 : 1973 , including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.

Providing & erecting a " W " metal beam crash bbarrier comprising of 3 mm ( three milimetre ) thick corrugated sheet metal beam rail, 70 ( seventy ) centimetre above road/ ground level, fixed on ISMC series channel vertical post, 150x75x5mm ( One hundred fifty into seventy five into five milimetre ) spaced 2 ( two ) metre centre to centre, 1.8 mm ( One hundred eight milimetre ) high, 1.1( One point one metre ) metre below ground/ road level, all steel parts & fitments to be galvanised by hot dip process, all fittings to conform to IS: 1367 & IS : 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm ( One hundred fifty into seventy five into five milimetre ) , 330 mm ( three hundred thirty milimetre ) long complete as per clause 810. including carriage of materials within all leads, lifts & other incidentals complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing of typical NABARD informatory sign board with logo as per MORD specifications and drawing. Three mild steel plates of 1.6 mm ( One point six milimeter ) thick, top and middle plate duly welded with mild steel flat iron 25 mm x 5 mm ( Twenty five milimeter into five milimeter )size on back on edges. The lower plate will be welded with mild steel angle iron frame of 25 mm x 25 mm x 5 mm ( Twenty five milimeter into twently five milimeter into five milimeter ). The angle iron frame of the lower most plate & flat iron frame of middle plate will be welded to 2 Nos ( Two number ) 75mm x 75mm ( Seventy five milimeter into seventy five milimeter ) of 12 ( Twelve ) SWG sheet tubes posts duly embedded in cement concrete M-15 ( fifteen ) brade blocks of 450mm x 450 mm x 600 mm, 600 mm ( Four hundred fifty milimeter into four hundrted fifty milimeter into six hundred milimeter, six hundred milimeter ) below ground level. The top most dismond plate will be welded to middle plate by 47 mm x 47 mm ( forty seven milimeter into forty seven milimeter ) of 12 ( twelve ) SWG steel plate tube. All mild steel will be stove enamel paint of superior quality in required shade and colour. All sections of framed posts & steel tube will be painted with primer and two coats of apoxy paint as per draweing clause 1701 and annexure 1700.1, including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge .

Reinforced cement concrete M15 grade kilometre stone/ Local stone of standard design as per IRC:8 fixing in position including painting & Printing etc. as per drawing and Technical Specification clause 1703 including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge,Ordinary Kilometer stone ( Precast ) including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge

200 meter ( two hundred milimetre ) stone ( Precast ) including carriage of materials within all leads, lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge

Providing & fixing 1.80 ( one point eight zero ) metres high Galvanised iron barbed wire fencing with 2.40 ( two point four zero ) metres reinforced cement concrete M-15 grade ( mixed design fifteen ) 150mm x 150 mm ( One hundred fifty milimetre to one hundred fifty milimetre ) concrete post placed every 3.00 ( three point zero zero ) metre centre to centre founded in M15 grade ( mixed design fifteen ) cement concrete, 0.60 ( zero oint six zero ) metre below ground level, every 15th( fifteenth) post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 ( twelve ) horizontial lines and 2 ( two ) diagonals inter woven with horizontial wires, fixed with Galvanised iron Staples, turn bucets etc. complete as per clause 1705, including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.

Note:-The contractor shall procure all the materials conforming to specification MORT&H at his own risk and cost. All rates including octroi, royality,malkhana,tall tex, GST or other tax imposed by the Govt.