Supply, installation, testing and commissioning of Diesel Generator 2000 KVA with complete accessories at Dudhmotisagar Dairy- Dharuhera.

Basic Unit Price

Supply of Diesel Engine with rated capacity of 2000 KVA at 0.8 P.F., 1500 RPM. 4 stroke, multicylinder coupled to brush less type 415 Volts 50 cycle/second self-exited alternator completed with cushy pads, Silencer, Injectors, Advance Gensets Controller, 5C Warranty (5 Critical Parts of Engine - Cylinder Head, Cylinder Block, Camshaft, Crankshaft, Connecting rod, are warranted for 5 Years or 5000Hrs. of operation), Alternator auxiliaries, electronic governor, 24 volts chargeable battery including initial charging of batteries, as per specifications. The DG Sets shall be SILENT TYPE, HE COOLED. Sound proof Canopy & Diesel Tank with all accessories. CAQM Compliant DG sets that meet the CAQM emission standards in accordance with CAQM Direction No. 76, Order No. F.No. A-11018/01/2021-CAQM/15322-15331 dated 29.09.2023. Or further amended any directions as per CPCB. Including (1) Chimney as per Govt. Norms. (Suitable) (2) Cooling System

Coil Cooler for 2000 KVA DG Sets. (HE cooled)

Isolator Panel of Alternator mounted for 2000 KVA DG Sets

Exhaust System

Fuel piping

Supply and fixing of Valves

Earthing

Control Cables

Power Cables

Providing of End Termination of the various sizes of control & power cable

Cable Trays

Liasoning Work

All Documentation including Manuals, Drawings, P&ID etc. & Training

Total Price bid Amount ( Supply, Installation & Commissioning )

Work Description

1 Preparation, submission, and approval of Electrical SLD modification from CEI (Haryana)

for replacement of 1450 KVA transformer with 2500 KVA transformer.

Replacement of existing 1450 KVA transformer with new 2500 KVA transformer (old 1450

KVA transformer buy-back cost to be adjusted).: - 02 nos.

*Supply 2500KVA 11/0.433KV (Make: Crompton Greaves).OLTC+RTCC+AVR ONAN outdoor distribution transformer with all standard accessories as per IS 1180 & GTP Attached. Service charges for erection, oil filtration, testing and commissioning of 2.5MVA 11/0.433 kV, Distribution Transformer on Load Tap Changer +5% to -15% @ 1.25% Dyn11.

Modification of transformer bus duct and adapter from 2500 A to 4000 A as required for 2500 KVA transformer. 1) Retrofitting of 3WT 4000A, 4Pole ACB with Aluminum bus bar (150X10X3 run per phase & 150X10X2 run Neutral), HT Hardware, PVC Insulation Sleeve R.Y.B.N, Bus Bar Support, CT-4000/5A & Feeder wiring. (WITH MATERIAL). (2) Bus Duct Material: (MATERIAL WITH SERVICE) Aluminum bus bar 150X10, PVC Insulation Sleeve R.Y.B.N, Finger Support 3X0- 65nos., 2X10- 22 Nos., Finger Support Chanel-20Nos., MS Chanel-20 Nos, HT Hardware Normal Hardware. (3) Supply of Copper Flexible.

4 Replacement of HT VCB CT from 100/5 A to 150/5 A Job 1

5 New neutral and body earthing for 2500 KVA transformer. Job 1

6 Modification of Main LT Panel bus bar from 2500 A to 4000 A as required for 2500 KVA transformer.

Replacement of Main LT Panel ACB from 2500 A to 4000 A as required for 2500 KVA transformer (Supply of 3WT 4000A 4Pole EDO ACB. SIEMENS)

8 Replacement of Refrigeration Outgoing ACB from 2500 A to 4000 A as required for 2500 KVA transformer. (Supply of 3WT 4000A 4Pole EDO ACB. SIEMENS).

9 Modification of Refrigeration Outgoing ACB bus bar from 2500 A to 4000 A. (service with material)

10 Replacement of Power Factor Improvement (PFI) panel capacity from 400 kVAr to 800 KVAr TR-1 Panel & 500 kvar to 800 kvar TR-2 Panel).

11 Obtaining NOC from CEI, Haryana for installation of 2500 KVA transformer in place of 1450 KVA

12 Application and approval for extension of electrical load up to 3990 KVA from DHBVN, CE (OP) Office

Supply, Installation, Testing & Commissioning (SITC) of 3.5 Core × 400 sq.mm cable including termination, gland, and thimble.