Repairs to R & B Officer Quartetrs. At Valsad, Dist.: Valsad (Repaired to Sewer Line, Canopy Shed & Miscellaneous work)

Name of work :-

Repairs to R & B Officer Quartetrs. At Valsad, Dist.: Valsad (Repaired to Sewer Line, Canopy Shed &

Miscellaneous work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling Tiled of stone floors laid in mortar including stacking of 282 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and 8 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 372.9 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

4 Demolition and disposal of unserviceable materials with all lead and lift.(i) 3 cumt 609.26

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 12 Nos 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

6 Dismentling steel work including distempering and stacking the materials 495 Kg 3.67

with all lead and lift.

7 Removing and scraping of old deteriorated plaster of any thickness 914 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

8 Removing, Repairing and Refixing Old existing wooden door shutter 13 No 1324.11

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

9 Providing and laying water proofing treatment by conventional method 30 Sqmt 897.89

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

10 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 26 Sqmt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush pointing in colour

cement slurry etc. complete. Colour and Shade approved by Engineer-In-

11 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 59.5 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

12 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 196.2 Sqmt 1067.50

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

13 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 35 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

14 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 43 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

15 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 85 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe

16 Providing, laying and jointing in true line and level 75 mm dia. UPVC 53 Rmt. 697.94

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

17 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 52 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

18 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 104.85 Rmt. 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

19 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 10 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

20 Providing and fixing screw down bib taps of following size.(B) Brass 19 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

21 Providing and fixing brass screw down stop tap.(A) 15mm dia. 4 Nos 205.83

22 Providing and fixing pillar tap, capstan head, screw down high pressure 4 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

23 Providing and fixing chromium plated brass half trun flush cock of 4 Nos 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

24 Providing and fixing wsh down water closet (European type, W.C. Pan) 4 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in white

25 Providing and fixing washbasin with single hole for pillar tap with C.I. or 4 Nos 1506.45

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

26 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 4 Nos 67.91

27 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 4 Nos 78.75

28 Providing erecting and fixing double coated ISI water tank of required 4000 Litre 3.95

capacity each with all necessary fittings and connection etc. complete on

29 Providing and fixing S.W. gully trap with C.I. grating brick masonry 6 Nos 1292.19

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

30 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP 9.5 Sqmt 2019.98

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking

31 Provoding and fixing flush door shutters, solid core construction with 14 Sqmt 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

32 Providing 15mm thick cement plaster in single coat on Rough (Similar) 272 Sqmt 153.20

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Ground floor

33 Providing 15mm thick cement plaster in single coat on Rough (Similar) 349 Sqmt 176.59

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For First Floor

34 Providing 10 mm. Thick cement plaster in single coat for plastering on 133 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

35 20mm thick sand faced cement plaster on walls upto height 10 metres 212 Sqmt 300.66

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

36 Removing dry or oil bound distemper by a washing and scraping and sand 2081 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

37 Applying two coats of putty & two coats of primer of approved brand and 1347 0 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

38 Wall painting (two coats) with plastic emulsion paint of approved brand 1347 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

39 Wall painting (two coats) with plastic emulsion paint of approved brand 265 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

40 Finishing wall with weather proof exterior emulsion paint on wall surface 470 Sqmt 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

41 Painting Two coats (excluding priming coat) on previously painted steel 110 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

42 Brick work using common burnt clay building bricks having crushing 2 cumt 4021.02

strength not less than 35 kg./Sq.Cm. in Foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

43 Providing and fixing polished 18 mm thick black granite with full round 32 Sqmt 2650.24

edge and double side polished of approved quality in between urinal and

fixing with cement slurry & adhesive including moulding of both exposed

edges as directed by engineering in charge etc. complete

44 Providinfg and fixing Safty grills of required pattern for windows/ Door 495 KG 109.08

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc. including

one coat of primer of approved quality and two coats of oil painting as

per detail drawing etc complete.

45 Steel work, welded in built up sections framed work including cutting, 1380 KG 90.48

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

46 Providing and fixing of Ridge flashing for roof panel shall be made out of 46 Sqmt 858.67

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

47 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 1 EACH 2280.27

including cutting holes in walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size

48 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 3 EACH 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

49 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 4 EACH 603.19

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

50 Providing and fixing tiles roofing with manglore tiles including teak 196 Sqmt 257.70

reepers of sizes 50mm x 25mm.

51 Costructing sandwich platform of 18 mm thick polished black granite at 4 Sqmt 4601.56

top and 25mm thick kota stone slab one side polished at bottom with

cementing materials / adhsives including making necessar 25mm suppor6

every 60 cm cerntre to centre or as required including all labour material

of approved quality incl.full moulded round front edge granite strip of

one side polished and jointed with grey cement5 slury including rubbing

and polished etc. complate for all floors.

52 Providing and Fixing Pre Stitched Fiber Glass Mosquite Net with Fastener 18 Sqmt 389.86

tap in four side for all window and other opening with required all

accessories etc. complete.

53 Providing and fixing 35 mm thick shutters for Doors, windows and clear 12 Sqmt 3229.98

story windows including anodised alluminium butt hinges with necessary

screws. (A) Indian Teak Wood (ii) Fully Mosquito Net Shutter.

Rupees Sixteen Lakh Four Thousand Three Hundred Twenty Five and Nine only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1604325.09 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.17,802.00 (In Words Seventeen Thousand Eight Hundred Two

Rupees And Zero Paisa Only.) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

3 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division