Operation and Maintenance of Bellavi pump house at 108.060 km of TBC Raising main and Distributory network till delivery tanks for the Year 2026-27

Operation and Maintenance of Bellavi pump house at 108.060 km of TBC Raising main and Distributory network till delivery tanks for the Year 2026-27

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

Supply of Hydroulic excavator 0.90 cum bucket and executing the work as directed by the Engineer in charge of work.

Supply of Diesel to site as directed by the Engineer in charge of work.

Supply of Diesel generating set 30 KVA and executing the work as directed by the Engineer in charge of work.

Re-filling of fire extinguisher, CO2/4.5 ltr (2 No.), Dry powder/6kg capacity and executing the work as directed by the Engineer in charge of work.

Supply of Gland ropes for pumps of 16 sqmm size to site as directed by the Engineer in charge of work.

Supply of cotton waste as directed by engineer in charge

Supply of suitable size of coupling bolts and nuts including bushes as directed by the engineer in charge

Supply of bearing grease (special) and executing the work as directed by the Engineer in charge of work.

Supplying of Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose including Material cost, Transportation cost and other unf...

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. Complete including cost of materials, labour, usage charges of machinery complete as per specifications. Complete with all leads and l...

Supply of 120 sqmm aluminum end terminal lugs with hole size 16 sqmm including transportation charges and other unforeseen charges etc.Complete with all leads and lifts loading unloading and as direct...

Supply of 240 sqmm aluminum end terminal lugs with hole size 16 sqmm including transportation charges and other unforeseen charges etc., Complete with all leads and lifts loading unloading and as dire...

Supply of pump bearings of SKF make No. including transportation cost, labour charges and other materials etc., as directed by engineer in charge

Work of overhauling and servicing upto 1250KW, 6.6KV, motor as specified below a. Disconnect the HT/LT, Cable and record motor details take out the motor from bed b. Check alignment and record details...

Servicing breakers of motors Main incomer Breaker - 1 No.

Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables. b...

Supply and brazing of motor end lead cable by using H.T Copper lugs, brazing materials, gas, soldering past, etc as original for all the three phases for motor.180 KW ABB make motor 11 KV/415 V rating...

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 including Material cost, Transportation cost and other unforseen charges etc. PVC Wire - ...

Supply installation testing and commissioning of Timer, Complete with all leads and lifts loading unloading and as directed by engineer incharge of work.

Servicing and overhauling of Horizontal centrifugal pumps including transportation cost, bearing replacement, sleeve, neck rings, check nuts gland clamps labour charges and other materials etc. as dir...

Supply and installation & commisioning of CT coil as directed by the engineer in charge.

Supply and erection of suitable Amps HT Fuse of make including material cost, transportation charges and other unforeseen charges etc., complete as directed by the engineer-in-charge of work

Repair of of MS pipes of Raising main and delivery pipes if they get damaged by using materials welding work, cutting and other unforeseen materials and labour charges

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and Fixing MS cages and mesh to sluice chambers of size 2.5mX2.5m including welding fixing other labour charges and as directed by the Engineer incharge of the work