Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.8 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹9.5 L+₹69,759.15 (7.94%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹9.9 L+₹1.1 L (12.7%)Rejected-Finance | 3 | Rejected-Finance L3 | |
| 4 | 4₹10.1 L+₹1.3 L (15.0%)Rejected-Finance | 4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | AJIMON K R L1 | Dilkush L4 | Gijo Mathew L2 | SIJU RAJ L3 |
|---|---|---|---|---|---|---|---|
| 1.00viripanthal | |||||||
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 21.15 | cum | 5,847.46 ₹1,23,673.78 Lowest | 6,726.62 ₹1,42,268.01 | 6,311.97 ₹1,33,498.17 | 6,592.05 ₹1,39,421.86 |
| 1.00 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 297 | sqm | 302.69 ₹89,898.93 Lowest | 348.2 ₹1,03,415.4 | 326.74 ₹97,041.78 | 341.23 ₹1,01,345.31 |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 297 | sqm | 69.21 ₹20,555.37 Lowest | 79.61 ₹23,644.17 | 74.71 ₹22,188.87 | 78.02 ₹23,171.94 |
| 1.00 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 297 | sqm | 179.13 ₹53,201.61 Lowest | 206.06 ₹61,199.82 | 193.36 ₹57,427.92 | 201.94 ₹59,976.18 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 310 | kg | 500.52 ₹1,55,161.2 Lowest | 575.77 ₹1,78,488.7 | 540.28 ₹1,67,486.8 | 564.25 ₹1,74,917.5 |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 180 | kg | 606.25 ₹1,09,125 Lowest | 697.4 ₹1,25,532 | 654.41 ₹1,17,793.8 | 683.45 ₹1,23,021 |
| 1.01 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 220 | sqm | 1,422.89 ₹3,13,035.8 Lowest | 1,636.83 ₹3,60,102.6 | 1,535.93 ₹3,37,904.6 | 1,604.08 ₹3,52,897.6 |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 9 | sqm | 1,035.98 ₹9,323.82 Lowest | 1,191.74 ₹10,725.66 | 1,118.28 ₹10,064.52 | 1,167.9 ₹10,511.1 |
| 1.01 | 21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar | 4 | no | 604.87 ₹2,419.48 Lowest | 695.81 ₹2,783.24 | 652.92 ₹2,611.68 | 681.89 ₹2,727.56 |
Tender Value
₹10.3 L
EMD Value
₹25,646
Closing Date
4 Mar 2026, 4:00 pmClosed
Jithin K Abraham
OFFICE OF THE ASSISTANT ENGINEER, LID EW SECTION, MUTHOLY GRAMA PANCHAYAT
Annual Plan-Mutholy GP (259/26)-Sabarimala Edathavalam Viripanthal completion phase 2
2026_LSGD_839339_3
04/202526/AE/MTLY/ PHASE1
Open Tender
Civil Works - Buildings
Item Rate
240 days
Mutholy GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹25,646
Yes
21 May 2026
23 Feb 2026
6 Mar 2026
23 Feb 2026
4 Mar 2026
23 Feb 2026
viripanthal
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar
21.15.2:Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1414331.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_1414331.xls
BOQ • 0.30 MB
259fot.pdf
Tender Documents • 0.32 MB
259pre.pdf
Tender Documents • 0.36 MB
259sbd.pdf
Tender Documents • 2.02 MB
integritypact.pdf
Tender Documents • 0.16 MB
affidavit.pdf
Tender Documents • 0.11 MB
requisition.pdf
Tender Documents • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .