SJMMSVY UDP-88 GRANT (2024-25)

Sr No Qty DESCRIPTION OF ITEM Rate PER AMOUNT

Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

using site rails and stacking excavated stuff including up to all

required lead cleaning the site etc. complete for all lifts and

strata as specified.

(A) In all sorts of soil and soft murrum

827.00 1.A.1 Upto 1.50 mt depth 102.35 Cu.m

241.50 1.A.2 1.50 mt to 3.00 mt depth 112.70 Cu.m

P.C.C. M-10 levelling Course

Providing and casting in situ mass cement concrete in grade

M-10 (approx. corresp. to prop. 1:3:6) using granite quartzite

trap metal of size 12 mm to 25 mm incl. consolidation curing

3 R. C. C. PIPE (Horizontal Cast)

Providing and supplying ISI Standard R.C.C. pipes (of Sulphate

Resisting Cement) in standard lengths of following class and

diameter suitable for either collar joints or rubber ring joints

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS - 458/

1989)Note : One collar should be supplied with each full

length plain ended RCC pipe, cost included in rates below.

One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

400.00 Class NP3 Test Pressure 0.7 Kg/sq.cm 150 mm 380.65 Rmt

4 L,L& J of R.C.C. Pipes

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of

following diameters in proper position, grade and alignment

at all level as directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving

hydraulic testing as per ISI code.11.b Class NP2,NP3,NP4

400.00 Class NP2 Test Pressure 0.7 Kg/sq.cm 150mm 63.63 Rmt

5 Stoneware Pipe

Providing and supplying ISI marked only Standard length

Stoneware pipes in standard lengths of following class and

diameter including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc.

complete. (IS - 651 / 1989)11.2 Class AA

6 L,L& J of Stone Ware Pipes

Lowering, laying and jointing Stone Ware pipes of following

diameters with cement joints in C. M. 1:1 proportion in

proper position, grade and alignment at all level as directed

by Engineer-in-charge including conveyance from stores to

site of work, Jointing material etc. comp.

7 Sewer Manholes

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per the

type design in brick masonry in C. M. 1:5 and inside and

outside 20mm thick plastering in C. M. 1:3 necessary 100 mm

coping with reinforcement in R.C.C.M. 200 fixing C. I. steps

and fixing manhole frame and covers (But excluding supply of

manhole frame and covers) over manholes and house

connection chambers and fixing Manhole covers (but

excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety chain

wherever necessary as per the stipulations in the type design

complete as per latest CPHEEO manual. (excl. excavation).(A)

Manhole type "A" Circular type having inside diameter of

1200 mm for depth upto 1.5 m depth (for 150 mm to

10.00 1). Manhole type "A" as above but upto 1.0 M depth. 14005.85 No.

2). Extra depth beyond 1.0 M but upto 1.5 M depth for "A"

type manhole above.

(B) Manhole type "B" circular type having inside diameter

of minimum 1500 mm and for depth from 1.5 M to 4.0 M

(for 150 mm to 600 mm dia sewers)

6.00 1). Manhole type "B" as above but upto 1.5 M depth. 24283.40 No.

2). Extra depth beyond 1.5 M but upto 4.00 M depth for "B"

type manhole above.

8 Chamber for House Connection

Providing and constructing rectangular brick masonry

chamber for house connection as per type design in brick

masonry in C. M. 1:3 including M-100 in foundation M-150 in

30.00 benching inside plastering in C. M. 1:3 and outside plastering 9110.30 No

in C. M. 1:3 coping in M200 and fixing RCC precast manhole

frame and covers, but Excl. supply of manhole and cover etc.

complete excl. excavation.

9 RCC precast M.H. Frame & Cover

RCC precast M.H. Frame & Cover Manufacture, supply &

Delivery at store or at site of work precast RCC M.200 Frame

& cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flat,

curing mold work etc.10.4.A Heavy duty

16.00 1. Frame suitable for 50cm opening of MH 1289.15 No

16.00 2. Cover suitable for 50cm opening of MH 1348.95 No

10.4.C House Connection Chamber light duty

Refilling the pipeline trenches incl. ramming, watering,

10 943.00 consolidating desposal of surplus stuff as directed within a 25.30 Cmt

radius of 3 km.

Total Amount With GST

Total Amount With GST

Add 2.00 % Contigency

SB-2 (Supplying & Installing LED Street Light from Kheda Lovely to Utavarshah Dargah to

Faljibhai House to Petrolpump Ward No. 03)

Sr. No Qty Item Rate Per Amount

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

1 10 THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 1823.05 Nos.

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

Supplying and erecting approved make Conical Pole (Medium Duty

) Made from HR sheet steel. The pole should be made as per IS.

and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, with required base plate and integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard

2 10 profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type 10169.69 Nos.

terminal and arrangement for cable terminations as erected on

suitable foundation (included) with necessary GI nut-bolts/J-Bolts.

as per details given by manufacturer considering site requirement.

The length of poles are as below.(D) 6 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

3 10 Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm 809.01 Nos.

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables. (B) 4 core 6 Sq. mm

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

5 2 in test Certificate) & having back filling compound of (B) Inner 8636.51 Nos.

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (c) For

Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Street Light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable

B Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of 1.5.mtr.

6 10 length with 110 deg.with vertical plane & suitable welded stays, 683.77 Nos.

reducer and with check nuts complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm Bracket

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

7 10 mob & hinged doors as per requirement having locking 414.10 Nos.

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.(B) 250mm x 200mm x 100mm [deep]

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A) 6 to 32 Amp.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the

surface as normal ground.

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for pipe type

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

12 80 cable 1.1 KV grade to be erected as directed of following size. (E) 3 137.36 Mtr.

core 2.5 Sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

13 300 connecting accessories of same material at required depth in 62.62 Mtr.

existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm outer dia

Add 3.00% Contingency Rs.

Add 1.00% Quality Control Rs.

Grand Total Rs.

Grand Total Rs.

Say Total Amount

Say Total Amount