SPECIAL REPAIRS TO SMQ BUILDING NOS P 60 P61 AND P62 AT AF STATION KUMBHIRGRAM

Amount

SCHEDULE A PART I Dismentling existing water tank exc 250 & n. exc. 500 ltrs capacity and refixing in the same position complete all as directed.

Dismentling water tank exc 250 & n. exc. 500 ltrs capacity complete all as directed.

S&F 500 ltrs rotational moulded polyethelene water storage tank tripple layer (Cylinderical vertical with closed top) including connecting up pipes securing access covers complete all as specified and as directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball float valve screwed for iron pipe or brass ferrule of 20 mm bore of having minimum weight 210 gms complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

M&L for prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having temsile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having temsile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

S&F interlocking aluminium power coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and directed.

S&F 4 mm thick classic board of oceantexture fixed to aluminium frame work complete all as directed.

Demolition of reinforcement cement concrete (RCC) of any description and in any position complete all as directed.

Demolition of PCC (unreinforced) in ground floors and pavings n exc 15 cm thickness,(below or above ground level) complete all as directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 with (using 12.50 mm graded crushed stone aggregates) as in flooring, finished even and rough to receive the top layers all complete all as specified and directed.

M&L for non skid ceramic joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

S&F for glazed ceramic coloured/printed tiles of size 300x200x6 to 7 mm thick as in vertical surfaces such as skirting, dados over and including 10 mm thick screed in cement mortar (1: 4) complete all as specified and directed.

M&L for machine cut Udaipur green stone slab 18-20 mm thick laid over and including 15 mm thick screed bed in cement mortar (1:4) as in cooking platform set and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Taking down cement plaster on wall of any desription including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick cement mortar (1:4) on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra lime or cement) mixing with WPC @ 2 % weight of cement consumed or as per direction of manufacturer complete all as specified and as directed. Note: WPC shall be measured and paid separately under respective item as supply only.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint exterior grade over a coat of primer complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1: 6) on other than fair faces of brick work surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar (1:3) in ceiling and surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of cold and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of acrylic emulsion (weather coat) paint over external wall care putty,including primer on wall surface complete all as specified and directed.

M&L complete removal of existing treatment on wall and applying two coats of oil emulsion distemper over oil putty and primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of white wash on wall complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm each and n.exc. 4.00 Sqm each complete all as directed.

Taking down shutter exc 1 Sqm and n exc 2 sqm each complete all as directed.

Refixing shutter exc 1 Sqm and n exc 2 sqm each complete all as specified and directed.

S&F factory made solid pannel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening complete as as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for fixing holdfast,lugs,and filling hollow space of pressed steel door frame etc including necessary form work complete all as specified and as directed.

S&F 125 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

S&F 105 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete as specified and directed.

S&F MS hold fast for chowkats and other small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rouinded fitted with cut and mitred beads for securing gauge complete all as specified and directed.

S&F 35 mm thick facotry made second class hard wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood complete all as specified and directed.

S&F 25 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both faces complete as specified and directed.

S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F 150 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F 125mm long Aluminium anodised barrel tower bolts complete all as specified & directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

S&F sliding door bolt of 250 mm long plate type stove enamelled black with bright bolt not less than 12mm dia with and min of 6 bolts and nuts four on bolt plate two on staple bolt and fixed with shutters complete all as specified and directed.

M&L for 2nd class hard wood as in small articles such as hinge blocks or door stopper articles n. exc. 200cu cm each complete all as specified and directed.

M&L for preparation of new wooden surface of small articles such as door stopper etc n. exc. 0.1 sqm each and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of wood and wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F aluminium anodised 125 mm size haps and staple including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, as in palmet boxes fixed with nails and hardwood beading border all around complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as directed.

M&L for 20 mm thick 2nd class hardwood boarding, clean sawn, plain or feather edged as in shelve, built in cup board’s rack etc. complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 nominal dia wire & average width of aperature 1.18 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete as specified and directed.

M&L for MS flat Iron and angle iron iincluding cutting , riveting etc for fixing wire mesh complete all as specified and directed.

M&L for MS framed work, such as grills, gratings etc. with end of bars shouldered and /or rivetted or forged into spikes, framed guard bars conforming to Fe-290 Gde -E-165 complete all as speciied and directed.

S&F in repair steel window with side hung shutter including projecting hinge with steel handle and steel peg stay with glazing bars complete all as specified and directed.

S&F in repairs steel window with side hung shutter including projecting hinge with steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and directed

S&F in repairs in steel ventilator with top hung shutter without glazing bar, including hinges, steel peg stay, complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3 mm thick figured glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

Taking down tarfelt with tiles and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust complete all as directed.

M&L for 10 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ).

M&L for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item as supply only).

M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.25 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (Note :- Bituminuous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" manufactured by M/s Texsa India Ltd/STP ) (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "MOPLY FP 3MM" manufactured by M/S Texsa India Limited/STP. (iv) Applying two coats of Aluminium paint over APP membrane.)

Taking down CI/PVC/AC soil pipe including fittings complete all as directed.

S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 110mm dia PVC SWR bends of any radius with access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal with access door Complete all as specified and directed.

Cutting through brick wall for holes and making good disturb portion in cement mortar (1:3) complete all as specified and directed.

M&L for 100 mm dia CI floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate complete all as specified and directed.

S&F 100 mm dia CI Nahani trap plain with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate complete all as specified and directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection and PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580x440 mm white with intgeral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of lime concrete bedding complete all as specified and directed.

S&F in repair 15 mm bore PTMT bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gram complete all as specified and directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

M&L for brick work with Sub class 'B' brick exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

SCHEDULE A PART II Taking down carefully aluminum/copper point wiring (light, fan socket or power) including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc and keeping serviceable light fittings in safe custody for reuse in the work complete all as directed.

M&L for concealed point wiring , with 1.5 sqmm PVC FRLS insulated(red for phase and black for neutral) sheathed , multi stranded copper conductor 1100 volt grade cable and 1.5 sqmm green in colour PVC insulated multy stranded copper conductor cable for earth continuity wire drawn through in and including PVC conduit and connected to common earth bus including factory made metal sheet terminal box flush type of thickness not less than 3.00mm( required as per site condition), for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessiories for one light point controlled by one way switch complete all as specified and directed

All as per serial item No. 85 above but for one socket 5 Amps on independent board.

All as per item No. 85 above but for one 3 pin 5/15 Amps switch socket out let independent and using PVC insulated, unsheathed FRLS stranded copper conductor cable of size 2.5 Sqmm and 1.5 sqmm for earth continuity conductor for one 5 pin 5/15 Amps switch socket out let independent

All as per serial item No. 85 above but for one light point controlled by two 2 way switch.

All as per serial item No. 85 above but for one bell point controlled one bell push.

Taking down existing sub main wiring of any type/size complete from wall and making good the disturbed surface complete all as specified and directed.

M&L for sub main wiring with 2 x 2.5 Sq mm PVC FRLS insulated single core unsheathed stranded copper conductor drawn in and including PVC coduit with continuous running earth wire by 1.5 Sq mm PVC FRLS unsheathed multi strand copper conductor as earth wire complete all as directed. Note:- Two runs of 2.5 Sqmm cable and one run of 1.50 Sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 2 x 4 Sq mm PVC FRLS insulated single core unsheathed stranded copper conductor drawn in and including PVC coduit with continuous running earth wire by 2.5 Sq mm PVC FRLS unsheathed multi strand copper conductor as earth wire complete all as directed. Note:- Two runs of 4 Sqmm cable and one run of 2.5 Sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

S&F call bell ding dong type single pole 230 volts complete all as directed.

S&F bell push single pole one way 5 amps complete all as directed

Fixing only serviceable bell push single pole one way 5 amps complete all as directed

S&F switch piano flush type single pole one way 5 amps complete all as specified and directed.

Fixing only serviceable switch piano flush type single pole one way 5 amps complete all as specified and directed.

S&F switch socket combination 5 -in-1, 5 Amps 5 pin flush type complete all as specified and directed.

Fixing only serviceable switch socket combination 5 -in-1, 5 Amps 5 pin flush type complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin 5/16 Amps flush type universal complete all as specified and directed.

Fixing only serviceable switch socket combination 2 in 1, 5 pin 5/16 Amps flush type universal complete all as specified and directed.

S&F ceiling rose, surface bakelite 65x50 mm three terminal complete all as directed.

Fixing only serviceable ceiling rose, surface bakelite 65x50 mm three terminal complete all as directed.

S&F stepped type delux electronic ceiling fan regulator AC 230 Volts complete all as directed.

Fixing only serviceable stepped type delux electronic ceiling fan regulator AC 230 Volts complete all as directed.

S&F LED tube light fittings , 1 x 09/10 watt 2 feet long basic all perpose surface and wall mounted with polycarbonate housing and integrated electronic driver and necessary electric connection complete all as specified and directed. Make: Havells Cat No. LUMILINEBS9WLED830SPCWH or equivalent model of make Crompton/Surya/Bajaj

S&F LED tube light fittings , 1 x 18/20 watt 4 feet long basic all perpose surface and wall mounted with polycarbonate housing and integrated electronic driver and necessary electric connection complete all as specified and directed. Make: Havells Cat No. LUMILINEBS20WLED865SPCWH or equivalent model of make Crompton/Surya/Bajaj

Fixing only old serviceable tube light fitting of any type and any wattage complete all as directed.

Taking down unserviceable rusted/damaged sheet metal enclosure DBs of any size/type/ways from wall carefully and making good to disturbed surface of wall complete all as directed.

S&F MCB DB SPN, 8 way IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as directed.

S&F MCB DB SPN, 4 way IP-43 made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as directed.

S&F MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as directed.

S&F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 32 Amps complete all as directed.

S&F MCB DB SPN, 2 way made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with single door complete all as directed.

S&F isolator double pole capacity up to 32 Amps complete all as directed.

M/S R A ENTERPRISE

M/s J. C. CONSTRUCTION

M/S LUIT CONSTRUCTION