talab safai

Amount

Description

Dewatering from foundation of abutments and wing walls (with pump capacity 4000 lit per Hr.including wages of operator and fuel including supply of all material, labour and T&P etc. required for proper completion of the work.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Concrete with cement coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material labour and T&P etc. required for proper complition of the work.Rate section of Miscellanius S.I. No 2-2

Brick masonary work in cement mortar in foundation complete excluding pointing and plastering as per Drawing and technical specification Clauses 600, 1202 & 1203 Brick masonary in 1:4

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408..

Providing and Laying of Interlocking Concrete Block Pavements having thickness60 mm as per drawings and Technical Specification Clause 1504.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301

Providing fitting and fixing mild steel railing complete as per drawing and technical specifications Clause 1208.2

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 note :- if cement plaster 12 mm or 18 mm thick is required elsewhere only the quantity of cement mortar may be changed on prorata basis without any change in the labour

Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1702

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:2:4) Rate section of MORD skeleton as per Si.No. 11-4-3-1 Nominal mix (1:2:4)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil

M/s ISHAQ AHAMAD

M/S PARAVEEN SINGH CONTRACTOR KASHIPUR