Construction of toilet near the Kanji House of District Panchayat in Gram Sabha Dalanchapra

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. CPWD DSR 2023 Code No.- 2.8.1

P/L of cement concrete in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 2023 Code No. 4.1.8

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) CPWD DSR 2023 Code No. 6.1.2

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels. Bands, plain window sills, stair case and sprial stair cases above plinth level upto floor V level excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement: 1½ C/sand : 3 garaded 20 mm size stone aggrigate). CPWD DSR 2023 Code No.- 5.3

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick CPWD DSR 2023 Code No.- 5.9.21

Filling avilable excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.50 m CPWD DSR 2023 Code No.- 2.25

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) CPWD DSR 2023 Code No.- 6.4.1

Half brick masonary with common burnt clay (Non modular) bricks of class 150 in super structure above plinth level upto floor V level in 1:4 (1 cement : 4 Coarse sand ) CPWD DSR 2023 Code No.- 6.13.2

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels. Bands, plain window sills, stair case and sprial stair cases above plinth level upto floor V level excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement: 1½ C/sand : 3 garaded 20 mm size stone aggrigate). CPWD DSR 2023 Code No.- 5.3

Centering and shuttering including struting, propping etc. and removal of form for lintels, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thickness. CPWD DSR 2023 Code No.- 5.9.21

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels. Bands, plain window sills, stair case and sprial stair cases above plinth level upto floor V level excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement: 1½ C/sand : 3 garaded 20 mm size stone aggrigate). CPWD DSR 2023 Code No.- 5.3

Centering and shuttering including struting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. Ref to DAR 5.9.20

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. CPWD DSR 2023 Code No.- 5.22.1

Providng and fixing of 1 mm thick M.S. sheet door with frame of 40×40×6 mm angle iron and 3 mm gusset plate at the junctions and corner, all necessary fittings complete, i/c applying a priming coat of approved steel primer. Using Flats 30×6 mm for diagonal braces and centeral cross piess Ref. to CPWD DSR 2023 Code No.- 10.5.2

Providing and fixing angle Iron frames for door, windows and Ventilators of mild steel angle sections of size 35×35×5 mm joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, i/c fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. CPWD DSR 2023 Code No.- 10.31

Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster CPWD DSR 2023 Code No.- 13.9.2

12 mm cement plaster of mix of 1:4 (1 cement: 4 coarse sand) CPWD DSR 2023 Code No.- 13.4.1

P/L of cement concrete in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 2023 Code No. 4.1.8

Cement concrete flooring 1:2:4. 40mm thick with 20mm nominal size stone aggregate CPWD DSR 2023 Code No.- 11.3.1

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge. CPWD DSR 2023 Code No.- 11.44

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. CPWD DSR 2023 Code No.- 11.39

Finishing walls with water proofing cement paint of required shade CPWD DSR 2023 Code No.- 13.44.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture CPWD DSR 2023 Code No.- 13.62.1

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. CPWD DSR 2023 Code No.- 2.8.1

Extra for every additional lift of 1.50 m or part thereof in excavation/banking excavated or stacked materials CPWD DSR 2023 Code No.- 2.26.1

P/L of cement concrete in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 2023 Code No. 4.1.8

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering in 1:2:4 with Cement, C/sand & 20 mm stone aggregate DSR 2023 Code No. 4.1.3

Brick work with common brunt clay (non modular) bricks of class 150 in foundation and plinth in cment mortar in 1:4 (1 cement : 4 Coarse snad). DSR 2023 Code No. 6.1.1

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels. Bands, plain window sills, stair case and sprial stair cases above plinth level upto floor V level excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement: 1½ C/sand : 3 garaded 20 mm size stone aggrigate). CPWD DSR 2023 Code No.- 5.3

Centering and shuttering including struting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. Ref to DAR 5.9.20

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. CPWD DSR 2023 Code No.- 5.22.1

12 mm cememt plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. CPWD DSR 2023 Code No.- 13.9.1

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.DSR-17.1.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap.DSR-17.7.5

providing and fixing uplasticised PVC connection pipe with brss unions: 45cm length 15mm nominal bore as per DSR no. 18.21.2.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms long 15mm nominal bore .DSR no.18.51.1

Providing and fixing soil, waste and vent pipes 100mm dia complete all respect as per DSR no.17.35.1.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.DSR-18.8.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.DSR-18.8.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR-18.48

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter.DSR-12.41.2

Providing of Submersible water pump i/c Boaring, Lowering of PVC pipe with 1 HP water pump i/c all comp.

Supply and fixingof LED Tube Lightwith batten suitablefor up to 1 X 22 watt LED tube light complete includingtube etc on surface complete in all respect. (PSI No. 1413-A-cat-AA)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.DSR-1.10.3

Providing of 9 W LED Bulb (as per MR)

Wiring for Plug point with 1.5 Sq.mm. PVC insulated multi standard copper cable in recessed conduct and fixing 3 pin 5 amps. Socket outlet on the recessed with board and 5 amps, switch earthing the third pin etc. as required. (PSI No. 134-C)

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (PSI No. 137-C)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.DSR-2.10.1

S/Wiring of submain with 1 No. 4 Sq.mm. PVC Multi Standerd copper cunductor cable in 20 mm dia PVC conduit complete. PSI No. 216-C

S/F of Sign board

Please Enable Macros to View BoQ information