Construction of U.G. Girls Hostel at N.M. College of Agriculture at N.A.U.,Navsari

NAME OF WORK : "Construction of U.G. Girls Hostel at N.M. College of

Agriculture at N.A.U., Navsari"

SCHEDULE-B (Civil work & Plumbing work)

No. Description of Item Unit Estimated Amount (Rs.)

Clearing and grubbing road land including

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm

1 Hectare 0.32 84495.12

removal of stumps of trees cut earlier and disposal

of unserviceable materials(A) By manual means in

area of light jungle

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

4 not exceeding 20 cm. in depth consolidating each Cu.mt. 2778.00 133.66

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

Filling in plinth with sand under floors including

6 watering ramming, consolidating and dressing Cu.mt. 148.00 471.70

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

7 recommended i.e one litre 20 EC chemical emulsion Sq.mt. 660.00 81.21

with 19 liter give 1 %

concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Providing and filling rubbles including hand packing

and filling interstices with quarry spalls behind

abutments and between returns as directed.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

9 aggregates 20 mm nominal size) and curing Cu.mt. 250.00 3713.67

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in. Upto floor two

level Ground Floor ( A ) Foundations footings

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

11 form work and excluding the rate of reinforcement Cu.mt. 40.00 7767.91

for reinforced concrete work in. Columns Upto

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

12 form work and excluding the rate of reinforcement Cu.mt. 190.00 7889.11

for reinforced concrete work in. Columns at all

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. for Ground

Beams and Plinth Beams

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. for beam at all

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. Sill at all floor

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. Lintel & Coping

at all floor level.

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. all floor level

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. Plinth Slab

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in plan for complete

as directed by engineer in charge. slab at all floor

Providing laying controlled cement concrete M-250

work with curing complete including the cost of

form work and excluding the rate of reinforcement

for reinforced concrete work in. Staircase At all

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and placing

in position complete at all floor level. As per make

PLINTH PROTECTION: Providing and laying Cement

Concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregates 20 mm nominal size) 10cm thick having

width of 0.75m resting on brick massonary at out

side & inside by keeping 75mm bearing in plinth's

22 masonary including sand filling, finishing top Sq.mt. 132.00 558.53

surface and making false square in true line and

level and curing including cost of form work but

excluding cost of reinforcement and masonary at

outside etc complete as directed by E.I.C.

Brick work using common burnt clay building bricks

having crushing strength not less than

23 kg./Sq.Cm. in foundation and plinth in Cement Cu.mt. 86.00 4121.55

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional upto Plinth

Brick work using common burnt clay building bricks

having crushing strength not less than

24 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 - Cu.mt. 954.00 4444.59

fine sand)(B) Conventional at all floor level.

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

25 coarse sand ) with 2 Nos of 6mm Mild steel round Sq.mt. 1078.00 740.45

bars after every three course embedded in Cement

Mortar in foundation and

plinth (B) Conventional at all floor level.

Providing 10mm thick cement plaster in single coat

on brick/concrete walls for interior plastering upto

26 floor two level and finished even and smooth in Sq.mt. 2248.00 219.96

(i)Cement mortar 1:3 (1-cement:3-sand) at All Floor

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) at at all Floor level.

20mm thick sand faced cement plaster on walls

above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete. at All Floor level.

Providing throating or plaster drip and moulding to

R.C.C. Chhajja at all floor level.

Providing cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete at all floor

Providing & applying CHEMICAL WATER PROOFING

treatment to the terrace / sunk slab including

cleaning the surface, opening the creaks in " V "

grooves pattened and filling the same water proof

cement mortar 1:1 (1 cement: 1 sand ) including

brick bats as directed to have proper slope over a

layer of C.M. 1:1 (1 cement: 1 sand) including

finishing the top surface with 15mm thick water

proof cement plaster in C.M. (1:3) (1 cement:

sand) and finishing with a floating coat of neat

31 cement slurry using chemical water proofing Sq.mt. 1284.00 443.80

compound as per manufactures specifications and

standard specifications as per indian Water

proofing or equivalent including curing its with

specified period as directed and thickness to very

between 75 mm x 150 mm to have proper slope

and gradient including vata of 100 mm x 100 mm

size on with drip mould inside periphery of the

parapet / beam in C.M. 1:1 (1 cement: 1 sand ) etc.

completed by EIC.

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

32 creme out upto surface using white cement Sq.mt. 886.00 765.98

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Providing and laying Vitrified tiles (GVT) 8 to

mm thick , 24'' x 24'' in flooring laid on a bed

33 of12mm thick cement mortar 1:3 (1-cement : 3- Sq.mt. 2373.00 1058.21

coarse sand) finishing with flush pointing in white

cement. at all floor

Providing and laying Ceramic tiles 6mm thick in

flooring in Toilet and landing laid on a bed of

34 12mm thick cement mortar 1:3 (1-cement : 3- Sq.mt. 237.00 994.33

coarse sand ) finishing with flush pointing in white

cement. at all floor

Providing and laying Ceramic tiles 6mm thick in

Toilet dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

cement slurry at all floor

Providing and laying polished Kota stone slab

flooring for staircase including grooves as per

drawing over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

36 (1-Lime putty :1.5 - coarse sand) laid over and Sq.mt. 98.00 1010.92

jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick at all floor

Providing and laying polished kota stone for the

staircase slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar

1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the

shade of slab including rubbingand polishing etc.

complete. at all floor level.

Providing and fixing in Door ,Window sills and

jambs 18 mm thick Green Marble of approved

shade and size laid over a bed of C:M 1:6 including

38 cement floating, curing, rubbing, polishing, Sq.mt. 724.00 1575.60

cleaning, moulding on each side etc. complete and

joints with white cement. at all floor level.

Providing and fixing Sandwiched granite and kota

as Kitchen platform, pantry, Basin counter of width

0.60 to 0.70 m with 18mm thick granite of

approved color + 30mm Cm in 1:4 + 20mm kotah

stone one side polished in one piece for kitchen /

platform. The joint shall be filled with white cement

with pigments to match the color of the stone. The

cutouts for Kitchen sink if required shall be

39 provided as per drawing. The platform shall be Sq.mt. 37.00 4509.65

supported on pair of polished kotah stone @

to 0.90 m c/c filled with cement slurry. It shall

include facia. The facia and other edges shall be

duly chamfered / rounded as per drawing. The

stone shall be of one shade only and different

shades if found will be rejected, finished sizes shall

be measured & paid for.complete as per detailed

drawings & directed by E.I.C. at all floor level.

Providing and fixing 25 mm thick Kotah Stone

Double Side Polished with machine cut edge to all

sides as a platform, shelves, divider wall etc.

including making groove in wall and making the

same as per original including fixing the same with

C:M 1:3 ( 1 cement : 3 Bodeli sand ) in true line and

level, curing including rubbing, rounding edg and

polishing etc.complete as per detailed drawings &

directed by E.I.C. at all floor level.

Providing and fixing 35mm thick Both Side

Laminated Water Proof FLUSH DOOR shutters of (As

per make list) including first class hardwood and

cross band, block board core with plywood face

panels, 6mm thick batten patti all around the

shutter including 1mm thk. laminate on both the

side including S.S. ASIS 304 grade fixtures (As per

make list) (1) S.S. Hinges 4x1"x1" - 4 no.s, (2) S.S.

Stopper 20 Cm long - 1 no.s, (3) S.S. Handle for

Door 15 Cm size - 2 no.s, (4) S.S. Aldrop 25 Cm long -

2 no.s with necessary screws including providing

and applying primer coat and two coats of oil

painting of (As per make list) to edges of flush door

shutter etc. complete as per detail drawings and as

directed by E.I.C.

PARTLY GLAZED DOUBLE LEAF DOOR (LAMINATE

FINISH):- Providing & Fixing Partly Glazed Double

leaf Door, of size as per deatil drawing (for each

door.) considering block board flush door sheet of

35 mm thickness covered both side by 9 mm ply &

finished with 1 mm thick laminate on both sides of

shutters and having 12 mm clear toughen glass

slits as per given pattern & size with crystal edges

in both shutters , fixed with burmaborder Patti at

42 joints , Finishing with all necessary S.S hardwires Sq.mt. 4.00 7332.60

like DOOR S.S Handles 5PHO 2218SS -FPHO 2218

conceal Door lock Mortize Body 85x60M S.S , DOOR

UK key CYLI,60MM 1CK S.S 5 KEY M/HL 125 ROSE

SS ,cylinders, stoppers, tower bolt, MS nails, SS-304

screws,miscellaneous hardware items etc. As per

details given in drawing and as per instructions of

Architect/consultant/Engineer In charge.

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter having extra

reinforcement on sides & edges in polish finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also

43 taking hinges & fintures. The whole FRP frame & Sq.mt. 109.00 2615.05

shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures & fastenings &

fastener sleeve. at all floor level.

Providing and fixing window having extruded

aluminum Colour anodized section (2 nos. glazed

& one no. Mosquito net) frame main outer size

horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

1.06 Kg/mt with sliding shutters of horizontal

44 member size 40 mmx18mm x1.29mm @ wt.of Sq.mt. 157.00 1804.57

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame

as per details etc at all floor level.

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

at all floor level.

Providing and applying one coat of water based

exterior primer of approved brand and make as

mentioned below on wall surfaces after thoroughly

brushing the surface free from mortar droppings

and other foreign matter. Item includes making the

surface even and smooth by sand papers. Rates are

inclusive of all the material and labourers and

scaffolding work, cleaning of the floors etc.

required for the work with weather proof exterior

emulsion paint on wall surface (two coats) (5 Years

Warranty) to give an required shape even shade

after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc

complete at all floor level. As per make list

Applying two coats of Birla (white cement based)

or Asian (acrylic lapy- putty) or equivalent & two

coats of primer of approved brand and

manufacture on new wall surface to give an even

shade including thoroughly brushing the surface

free from mortar dropping and other foreign

47 matter and sand papered smooth with Wall Sq.mt. 8684.00 121.65

painting (two coats) (5 Years Warranty) of plastic

emulsion paint of approved brand and

manufacture on undecorated wall / Ceiling surfaces

to give an even shade (work for all the floors) As

Providing and fixing M.S. grills of required pattern

to frames of windows & ventilation etc. with M.S.

flats at required spacings and frame alround,

square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill. Etc complete as

directed by architect /EIC at all floor level.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning,oil,grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead. and Painting

two coats (excluding priming coat) on new steel

and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter. at all floor level. As per make list

Providing and fixing S.S. (16 Guage ASIS 304 grade)

PIPE RELLING of 0.90m height as pattern shown in

drawings at STAIRCASE with anchoring 0.075m in

RCC or masonry including 50mm dia. SS pipe as

hand rail, 32x32mm SS pipe as vertical support and

3 No.s - 16mm dia. SS pipe as intermediate

50 horizontal member including welding, grinding, RMT 30.00 4065.36

fixing in position with necessary fixtures and

fastenings (25mm bracket, base SS cap 50mm dia.

hole, base SS cap 32x32mm hole, SS pipe cap

16mm hole & 16mm long) and polishing etc.

complete as per detailed drawings & directed by

Providing, fabricating and fixing in walls / in kotah

stone frame M.S. C.R.C. Japan sheet of 16 gauge

frame inside inserted as per requirement on wall,

floor, ceilling all round and 18 gauge SHUTTER for

CUPBOARD as per drawing and design with

chromium plated fixtures & fastenings, locking

arrangement including applying red oxide priming

coat and painting 2 coats of enamel paint of

approved shade etc.. complete as directed by E.I.C.

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on 6mm

52 thick A.C. sheet or plywood sheet and fixing to Each 36.00 851.13

wooden pluge with C.P. brass screws and washers.

at all floor level.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines

with three or more inlets.

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight C.I.

54 cover with frame of 300mm x 300mm size (inside) Each 4.00 1292.20

with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type.

Supplying and fixing reinforced concrete heavy

duty non-pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2

watering and laying (to level or slope) of I.S. class

NP2 of following internal diameters.(i) 300mm dia.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

56 potable water of following dia. nominal bore tube R.mt. 30.00 170.36

fittings and clamps including making good the wall,

ceiling and floor etc.

complete.[A] 15 mm. As per make list

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

57 potable water of following dia. nominal bore tube R.mt. 60.00 253.83

fittings and clamps including making good the wall,

ceiling and floor etc. complete.[A] 25 mm. As per

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

58 potable water of following dia.nominal bore tube R.mt. 60.00 660.59

fittings and clamps including making good the wall,

ceiling and floor etc. complete.[A] 50 mm. As per

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. As per make list

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. As per make list

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. As per make list

Providing, laying in treanches and jointing in true

line and level 50mm dia. U-PVC PLUMBING PIPE

line (SCH-40) including fitting of (As per make list)

as approved by Engineer in charge. Pipe shall be

fixed on the wall with the help of clamp at every

meter c/c or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all material including

excavation for trenches and reffiling etc.. complete

as directed by E.I.C.

Providing & fixing 75 mm dia. PVC " Cowl Vent" of

ISI make of working pressure 4 Kg/sq.cm. with

63 adhesive solvent cement etc. in true line and level Nos. 10.00 33.33

etc. complete as directed by Engineer In charge.

Providing & fixing 110 mm dia. PVC " Cowl Vent"

of ISI make of working pressure 4 Kg/sq.cm. with

64 adhesive solvent cement etc. in true line and level Nos. 10.00 43.43

etc. complete as directed by Engineer In charge.

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure polythene pipes of

the following outside Dia. Low densidy, complete

65 with special falnge compression type fittings, wall R.mt. 160.00 280.24

clipsetc. including making good the wall ceiling and

floor.(F) 75mm As per make list

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure polythene pipes of

the following outside Dia. Low densidy, complete

66 with special falnge compression type fittings, wall R.mt. 120.00 339.05

clipsetc. including making good the wall ceiling and

floor.(F) 110mm As per make list

Providing, laying and jointing in true line and level

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials. As per make list

Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials. As per make list

Providing, laying and jointing (to level or slopes)

110mm diameter PVC-U RIGID pipes (Class 2) with

working pressure 4 kg/cm² conforming to IS 4985-

2000 with one end plain and other end socketed

with rubbering and fitting conforming to ISI 7834 of

ISI approved brand for Rainwater line fitted in

floors or walls. Pipe shall be jointed with each other

with rubber lubricant, Pipe shall be fixed on wall

using PVC clamps at every 2000mm c/c or shall be

69 concealed in wall as directed including necessary R.mt. 160.00 342.39

fitting such as bends, tees, shoe bend, end cap for

future expantion etc. including testing of pipe &

joints and jointed with adhessive solvent cement

including the cost of all materials including cutting

and making floors and walls as per original/good

enough if require.... etc., complete. as directed by

E.I.C. As per make list

Providing, laying and jointing (to level or slopes)

160mm diameter PVC-U SWR pipes (Type B)

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of ISI (PRINCE /

SUPREME / ASTRAL / FINOLEX / Equivalent) or

approved brand for drainage-line fitted in trenches

70 including excavation for trenches & refilling, Pipe R.mt. 60.00 1111.00

shall be jointed with each other with rubber

lubricant, including necessary fittings such as

bends, shoes etc. including testing of pipe & joints

and jointed with adhessive solvent cement

including the cost of all materials etc... completed

as directed by E.I.C. As per make list

Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including

the cost of cutting and making good the walls. As

Providing and fixing wash down water closet

(European type, W.C. Pan with Jet spray heavy

duty with S.S. Braided hose 60 cm long) with

integral P or S trap including jointing the trap with

soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white

colour As per make list

Providing and fixing to level or slope 110mm dia.

PVC-U SWR W.C. Connector of approved brand

with lipring including rubber packing ring fixing with

adhesive solvent cement and testing the same air

and water tight... etc., Complete as directed by EIC.

As per make list

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (A) Vitreous

China.(I) Long pattern = White colour including

Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar

74 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China., Each 21.00 1656.68

Providing and fixing in Cement Mortar 1:3 (1-

Cement : 3-coarse sand)a, pair of white vitreous

China 250mm x 130mm x 30mm footrest to long

pattern squatting pan water closet., earthwork and

bed concrete..etc. complete as directed by EIC. As

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

including fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550mm x v 400mm size. (i) In white

colour., including fixing C.P. Brass waste coupling

32mm dia. & 32mm dia. rigid P.V.C. waste pipe &

Providing and fixing pillar tap, capstan head, screw

down high pressure with screws, shanks and back

nuts. (i) 15mm dia., Providing and fixing brass screw

down stop tap.(A) 15mm dia., 15mm P.V.C.

connection pipe etc.. complete as ditectrd by E.I.C.

As per make list.

Providing and fixing SS Sink Glosy ASIS 304 Grade x

1mm thick with over all size 610x460 mm & bowl

size 560x410x200 with C.I. or M.S. brackets,

painted white including cutting holes in walls and

making good the same including fittings and

including the cost of providing and fixing rigid P.V.C.

waste pipe of 32mm dia. and waste coupline

mm dia. and testing the same for leak proof etc.

complete as directed by E.I.C As per make list.

Providing and fixing screw down bib taps of

77 following size.(A) Brass screw down bib tap Each 66.00 186.83

polished bright. (i)15mm dia. As per make list

Providing and fixing pillar tap of approved ISI brand

capstan head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm dia. As per

Providing and fixing chromium plated brass half

trun flush cock of rom made of approved quality

including fixing in pipe line etc. complete.(i) 20mm

dia. As per make list

Providing and fixing brass screw down stop tap.(A)

15mm dia. As per make list

Providing and fixing Two way BIB cock with wall

flange of genuine Jaquar ompany brand, in with

model no FUS-CHR29041, water tap brand or

81 approved ISI brand quality, fixing in pieline and Nos. 8.00 2949.20

testing the same… etc., complete., as directed by

Providing and fixing ball cock of approved. quality

as directed.(B) Abonite (ii) 50mm dia.

Providing and fixing C.P. brass towel rail comlete

with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 40mm dia. Zoloto bronze

handle valve including fixing in pipeline and testing

the same… etc., complete.as directed by EIC

Providing and fixing 50mm dia. Zoloto bronze

handle valve including fixing in pipeline and testing

the same… etc., complete.as directed by EIC

Providing and fixing 25mm dia. Zoloto bronze

handle valve including fixing in pipeline and testing

the same… etc., complete.as directed by EIC

Providing erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete on

Providing University Logo and Letter's Of different

sizes Engraved on Black Granite Stone, Painted

88 with Gold Foil on it. Making a Plaque and Fixing it Job 2.00 18180.00

on the structure, Price with Labour

Louvers: Providing and fixing U-shape panels of

mm width and 25 mm depth with variable gap

ranging from 25 mm to 100 mm as per architectural

drawings, manufactured from 0.50 mm GI steel or

0.55 mm Alu-Zinc coated steel or 0.65 mm

aluminium sheet as approved, fabricated to

required profile with precise folding and finish; all

exposed surfaces shall be treated with exterior-

grade corrosion-resistant Hypercote powder

89 coating with a minimum 10-year warranty suitable Sqmt 188.00 1818.00

for outdoor applications; panels shall be fixed using

aluminium L cleats, aluminium sections or MS pipe

framework as required, with corrosion and weather-

resistant screws/fasteners, including all necessary

accessories, sealants, scaffolding, lifting, cutting,

wastage, and installation complete in all respects as

per drawings, specifications, and directions of the

Architect / Engineer-in-Charge.

Providing & Fixing the Chikenmesh -

guage(Crimp Jali) of approved size applying

between the RCC and masonry junction in proper

line, level and plumb with all material, labour, tools,

tackles and equipment. Including providing and

fixing the jali with nails, etc complete as directed by

the site-in-charge. at all floor level.

Every additional depth of 0.1M. of part thereof

beyond 450mm depth for Brick masonry

chamber.(i) for 455mm x 610mm size.

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK