Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Not Admitted-Finance | Not Admitted-Finance Others-Quoted amount is higher then the justified amount |
Updated dates
Tender Value
₹5.0 L
EMD Value
₹9,926
Closing Date
24 Mar 2026, 3:00 pmClosed
Executive Engineer
Office of The DIS SHQ SSB Purnea
Annual Repair and maintenance of non residential building at 18 Bn Hqr SSB Rajnagar under SHQ Purnea.
2026_SSB_901829_1
EE/SHQP/18/2025-26
Open Tender
Civil Works - Buildings
180 days
18 Bn SSB Rajnagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,926
Yes
Office of The DIS SHQ SSB Purnea
30 Mar 2026
10 Mar 2026
25 Mar 2026
10 Mar 2026
24 Mar 2026
10 Mar 2026
10 Mar 2026 - 11 Mar 2026
11 Mar 2026
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 4 mm thick glass pane (weight not less than 10 kg/sqm).
Renewal of old putty of glass panes (length)
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats)
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats)
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group B
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
technical_947910.pdf
techsummary_947910.pdf
fin_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 31.01 MB
BOQ_947910.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid