24/MWEEE-I/2021-22/TC/01

Amount

Fabrication, supplying & errection of following size flange mounted hot dip glavnized octegonal pole made from HT steel plate window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as reqd.i/c supplying & fixing of 6mm thick laminated mounted sheet inside the window mounted on & i/c P & welding 3 nos.GI strips 4mm thick of suitable size tapped holes as reqd,terminal block suitable for 25 sq mm conducter 4 nos. & shorting links on DIN channel i/c pdg & fixing DIN channel of suitable length 6 amp SPMCB 'C' characteristics,earth stud, cable support clamp suitable for 4x25 sq mm cable Logo/Name of manufacturer shall be embossed on the pole.Galvanization as per relevant IS 5 Mtr. Height, 3 mm thick, bottom dia of 130 mm & top dia of 70 mm base plate of size 225x225x12 mm thick

Providing & laying in position M25 grade reinforced cement concrete foundation of size 450mm (L) x 450mm wide & 1000mm deep i/c excavation of earth providing cutting bending & placing in position reinforcement of cold twisted bars of 12mm dia -960 mm long(approx.)-8nos. and reinfocement of cold twisted bars of 8 mm dia 1400 mm ( approx.)- 6 nos.(with150mm spacing) as reqd. with supplying and positiong of 4 nos. foundation bolts 16 mm dia, 600 mm long, J type i/c 2 nos. template anchor plates of size 225mm X 225mm X 3mm & provinding DWC HDPE pipe for cable entry & exit as reqd. for 3 m and 5 mtr. pole

Fabrication, supplying & fixing of class B Galvanised single overhang arm bracket made out of 250mm long galvanized top tube with cap & 1000 mm long 32mm dia glavanized pipe with tighting bolts complete as reqd.

S.I.T.C. of 60 Watt LED Street light louminiare fitted with lense made of pressure die cast aluminium housing and Toughened glass cover complete with following specifaction as reqd. Total system wattage = 60 watt +- 5 % Lumnairer efficacy >= 100 luman/watt Power Factor>= 0.95 protection Class- IP-66

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existingRCC/Hume/ Stoneware/Metalpipe as required upto35sqmm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required upto35sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Drilling & Laying i/c HDPE pipe of 40 mm outer dia with PN 4 rating by trechless technology confirming to IS 4984

Supply of PVC/XLPE insulated and PVC/XLPE Sheathed AL conductor armoured cable conforming to IS7098 (PART-I)/1976 as required. 3 X 6 sqmm

S & D of 3x2.5 sqmm of FR PVC insulated Copper cunductor single core cable in the existing surface /recessed steel /PVC conduit as required.

Earthing with GI earth pipe 4.5Mx40mm dia acessorise and providing masnary enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal or coke and salt complete as required.

Providing and laying earth connection from earth electrode with 6SWG dia GI wire in 15 dia GI pipe fram with earth electrode i/c connection with G. I. thimble excavation and refilling as reqd. as required.

P & F 6SWG dia GI wire on surface or in recess for loop earthing as required.

SETH CONSTRUCTIONS

Kamal Electricals

ACE ENGINEERS BUREAU

A P R ENTERPRISES