Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC KUNNAPPILLIL BUILDING SOUTH MARADY P O MUVATTUPUZHA 686673 | MUVATTUPUZHA | ERNAKULAM | KERALA | 686673 | ₹33.3 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹33.4 L+₹7,250 (0.22%)Rejected-Finance | ₹33.4 L+₹7,250 (0.22%) | L2 | Rejected-Finance L2 Bidder |
| Sl No | Description | Qty | Unit | Ashly Furnishing Co Pvt Ltd L1 | A one furniture L2 |
|---|---|---|---|---|---|
| 1.00Chair | |||||
| 1.01 | Three seater waiting area chair: suppling and placing of chair with following specifications, perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width50.0 cm- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats shall be min 2cm. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm-91.0cm, Width & Depth of Chair as measured from ground - Width:173.5cm -176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | 148 | no | 10,900 ₹16,13,200 | 9,350 ₹13,83,800 Lowest |
| 1.02 | Medium back chair :-suppling and placing of chair with following specifications,The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support at fixed position. Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D)44.0cm-48cmn +. Armrest . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP .Overall dimensions of Chair shall range, Width of Chair 70.0cm-76.5cm, Depth of Chair 70.0 cm-76.5cm as measured from pedestal below. Height from ground - min 89.5cm - 102.5cm to max 100.5cm-111.5 cm. Seat height - min 43.3-44.5 cm to max 53.5 cm-54.3cm. Dimensions tolerance / variations shall be within +/- 1 cm.Chair tested as per ANSI/BIFMA x5.1 standards. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | 118 | no | 7,000 ₹8,26,000 Lowest | 9,550 ₹11,26,900 |
| 1.03 | Executive chair -Highback :- The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric.Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad and adjustable headrest. The moulded polyurethane foam for seat is with density=50-55 kg/m ³.The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest has button operated height adjustment . The arm top is made of soft moulded PU with MS in sert. The mechanism of chair shall have following features:360 degree revolving type, Synchronous 1 Mechanism. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be injection moulded in black GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitchcentredia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair -70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm..Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. | 34 | no | 8,900 ₹3,02,600 Lowest | 9,950 ₹3,38,300 |
| 1.04 | Supplying and placing of Cafe/visitor's Chair. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84. 5cm.Width-52.5 cm and Depth-55.8 cm. | 146 | no | 2,900 ₹4,23,400 Lowest | 2,950 ₹4,30,700 |
| 1.05 | Patient stool :- Providing and installing cushion top stool with 25mm x 25mm powder coated square pipe frame work with top upholstery work ( size 40 x40 x45 cm) | 33 | each | 5,100 ₹1,68,300 | 1,850 ₹61,050 Lowest |
Tender Value
₹36.7 L
EMD Value
₹50,000
Closing Date
6 Jul 2026, 3:00 pmClosed
Managing Director, INKEL Limited
1st Floor, Ajiyal Complex, Post Office Road, Kakkanad, Cochin - 682030
Supply of Chairs
2026_INKEL_857090_1
NIT/INKEL/KIIFB/2026-27/176 dated 22/06/2026
Open Tender
Miscellaneous Works
Item Rate
90 days
District Hospital, Mavelikkara
As per Tender Document
5 documents required · 5 mandatory
₹2,950
₹50,000
19 Sept 2026
22 Jun 2026
8 Jul 2026
22 Jun 2026
6 Jul 2026
29 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Chair | |||||
| 1.01 | Three seater waiting area chair: suppling and placing of chair with following specifications, perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width50.0 cm- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats shall be min 2cm. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm-91.0cm, Width & Depth of Chair as measured from ground - Width:173.5cm -176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | - | no | 1.25 | - |
| 1.02 | Medium back chair :-suppling and placing of chair with following specifications,The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support at fixed position. Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D)44.0cm-48cmn +. Armrest . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP .Overall dimensions of Chair shall range, Width of Chair 70.0cm-76.5cm, Depth of Chair 70.0 cm-76.5cm as measured from pedestal below. Height from ground - min 89.5cm - 102.5cm to max 100.5cm-111.5 cm. Seat height - min 43.3-44.5 cm to max 53.5 cm-54.3cm. Dimensions tolerance / variations shall be within +/- 1 cm.Chair tested as per ANSI/BIFMA x5.1 standards. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | - | no | - | - |
| 1.03 | Executive chair -Highback :- The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric.Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad and adjustable headrest. The moulded polyurethane foam for seat is with density=50-55 kg/m ³.The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest has button operated height adjustment . The arm top is made of soft moulded PU with MS in sert. The mechanism of chair shall have following features:360 degree revolving type, Synchronous 1 Mechanism. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be injection moulded in black GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitchcentredia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair -70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm..Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. | - | no | - | - |
| 1.04 | Supplying and placing of Cafe/visitor's Chair. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84. 5cm.Width-52.5 cm and Depth-55.8 cm. | - | no | - | - |
| 1.05 | Patient stool :- Providing and installing cushion top stool with 25mm x 25mm powder coated square pipe frame work with top upholstery work ( size 40 x40 x45 cm) | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1448749.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
Dwng.pdf
Tender Documents • 17.77 MB
BOQ_1448749.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .