Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹47.8 L+₹1.7 L (3.74%)Rejected-Finance | L2 | Rejected-Finance Become L2 | |
| 3 | L3₹48.4 L+₹2.3 L (5.03%)Rejected-Finance | L3 | Rejected-Finance Become L3 |
Tender Value
Refer Docs
EMD Value
₹93,300
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur, Assam
SPL REPAIRS TO BLDG NO P-31 (TYPE-1) AND PROVN OF CERTAIN SANCTIONED WORKS AT SAA (PHASE-16) UNDER GE (S) TEZPUR
2022_MES_542111_1
8697
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹93,300
Yes
28 Sept 2022
30 Jul 2022
27 Aug 2022
30 Jul 2022
25 Aug 2022
12 Aug 2022
Amount
Surface excvation n.exc 30cm deep and avg 15cm deep and getting out in soft/loose soil, complete all as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil, complete all as specified and as directed.
Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.
Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.
Sand Filling under floors or in foundations or in trenches including watering and consolidation, complete all as specified and as directed.
M&L for Hardcore of brocken stone or boulder of guage n exe. 63mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface, complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed.
Dismantling plain of corrugated steel sheeting any gauge,thickness as in roof covering complete all as specified and directed
S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed
Refixing old of pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed
S&F pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in ridge,eaves board valley fixed with self tapping screws complete all as specified and directed
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets all as directed.
S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of truss , complete all as specified and directed
Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of df bed blocks for hold fasts, complete all as specified and directed
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and directed
S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction, complete all as specified and directed
Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed
Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately), complete all as specified and directed
S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification, complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications. complete all as specified and directed
S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc, complete all as specified and directed
Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed
S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each, complete all as specified and directed
S&F 50mm Butt hinges medium weight cold rolled mild steel, complete all as specified and directed
S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and directed
S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and directed
S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws, complete all as specified and directed
S&F MS 200mm ordinary pattern door spring including roller and roller plate, complete all as specified and directed
S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as specified and directed
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples, complete all as specified and directed
S& F 4.0 mm thick sheet glass plain ordinary quality and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares, complete all as specified and directed
S& F 4.0 mm thick sheet figured/pin headed glass and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares, complete all as specified and directed
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.
Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as inhold fast/ chajja coping all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
M&L for 100 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in as in sub base complete all as specifed and as directed.
M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.
M&L for 100mm thick PCC 1:2:4 type B2 (40mm graded aggregate) as in footpath finished even and smooth without using extra cement, complete all as specified and directed
M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed
Demolition of reinforced cement conc of any description and in any position, complete all as specified and directed
M&L Reinforced cement concrete M 25 Design Mix (20 mm aggregate) including rafts footings, foundation beams, plinth beam base for column etc basement slab, under reamed piles and mass concrete all as specified.
M&L Reinforced cement concrete M 25 Design Mix (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed
M&L Reinforced cement concrete M 25 Design Mix (20 mm graded aggregate) as in coloumn, pillar, pier, posts etc complete all as specified and directed
M&L Reinforced cement concrete M 25 Design Mix (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat & rough finished surfaces of concrete, complete all as specified and directed
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchionsUse for rough finished surfaces of concrete, complete all as specified and directed
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete flat, complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed
M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed
Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.
M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as directed
S&F steel work in tubular truss of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.
Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer, as directed by Engineer in Charge.
S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair all as specified.
Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.
M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.
M&L for rendering 5mm thick plaster on ceiling in CM 1:3 incl finished even and smooth without using extra cement complete
Supply only integral water proofing compound complete all as directed.
Material and labour for prepration and applying three coats of white wash on ceiling surfaces all as specified and directed.
Material and labour for applying one coats of white wash on ceiling including preparation ofold ceiling surfaces all as specified and directed.
M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall.
M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down all as specified and directed
M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L Applying two coats of Oil bound distemper by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..
M&L complete removal of existing treatment and appplying one coats of weather coat by smart painting method over a coats of primer on old plastered surface as per manufacturer instrcution including properly fillings the cracks complete all as specified and directed.
M&L for Newly plastered surfaces of external wall with applying thin layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield primer by smart painting method complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed
All as per item No 77 above but in skirting over 10mm thick screeding/rendering in cement mortar 1:4, complete all as specified and directed.
S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3 , complete all as specified and directed.
M&L for chequred cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with with cement and pigment, treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.
M&L 20 mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.
S&F galvanised steel tubing 15mm bore, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor etc but concealed including cutting chassing and making good complete all as specified and directed.
S&F 20mm bore galvanised steel water tubing medium grade with all fittings & fixed complete to wall or ceiling or laid in floors, complete all as specified and directed.
S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down, complete all as specified and directed.
S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down, complete all as specified and directed.
Supply only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, as in repair, stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix, as in repair, stop valve/angle valve cast copper alloy, fancy type, chromium plated with screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.
Supply and fix, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including 610 mm long waste pipe etc complete all as specified and directed.
Material and labour, as in repair for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed
Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.
Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for applying for preparation of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.
Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.
Supply and fix, as in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float 32 mm dia flush pipe and handle including brackets complete all as specified and directed.
Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.
S&F Vitreous China urinals, bowl type urinal flat back, size of 465 x 355 x 265 mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.
Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches, complete all as specified and directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor all as specified and directed.
fixing only , 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all pipe all as sepcified and directed
fixing, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor all as sepcified and directed
S&F for PVC (SWR) with access door bend 110mm dia, complete all as specified and directed.
S&F for PVC (SWR) with access door bend 75 mm dia, complete all as specified and directed.
S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore, complete all as specified and directed.
S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore, complete all as specified and directed.
S&F in repairs of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.
S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent, complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed.
M&L for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.
M&L Prelaminated particle board 12 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
Supply & Fix as in repair CP shower rose 125 mm dia with revolving joints and fixed t o15 mm GI pipe or unoin, complete all as specified and directed.
S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.
S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.
S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.
M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
Demolition and breaking-up of 150mm nominal dia unserviceable SGW, AC,PVC or re-inforcement concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and directed by Engr-in-Charge.
M&L P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and hunching against side of pipes after they are laid down and tested complete for 150 mm bore pipe complete all as specified and as directed.
M&L 150 mm internal dia salt glazed stoneware drain pipes , laid in trenches and jointed as specified all as specified and as directed
Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.
Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed
M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm, complete all as specified and directed.
Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed.
Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 750mm X 600mm X 250mm with three shelf complete all as specified and directed. Make : Prayag/Bluestart
Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 140 mm complete all as specified and directed
Taking down old unserviciable cable from any where and any size, complete all as specified and directed.
Supply, laying in ground / fixing on surface of wall / dron through GI pipe etc connecting thembling and testing of LT under ground cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core cable complited all as spacified and dircted.
Supply, laying in ground / fixing on surface of wall / dron through GI pipe etc connecting thembling and testing of LT under ground cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sq mm 2 core cable complited all as spacified and dircted.
supply and fixing GI pipe 50 mm to wall/pole/under ground of medium grad with required clamping arrangments to fix with the pole or in trenches, complete all as specified and directed.
Labour for boring to road or path horizontal for crossing of cable of any size, complete all as specified and directed.
supply and fixing GI pipe light grad bore of tube 40 mm dia including all fitting, complete all as specified and directed.
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
S&F of 1000 ltrs capacity rotational moulded polythene water storage tanks (three layer) (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including dismantling of old tanks, complete all as specified and as directed.
S&F of 500 ltrs capacity rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including dismantling of old tanks, complete all as specified and as directed.
Taking up 25 mm dia GI pipe from trenches/floor including all fittings, complete all as specified and as directed.
Supply and fixing of GI pipe of dia 25mm to wall/Pole of medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA
Supply and fixing of gun metal gate valve of dia 25mm with iron wheel all as specified and directed for the following sizes Make: TATA / JINDAL
Supply and fix in repairs Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s), complete all as specified and as directed.
M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified.
M&L for overhauling/ servicing of ceiling fan of any make any model complete after dismantling it and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes and bearings including replacement of bush, bearing, split pin, rubber reel, nuts and bolts, mild steel ‘U’ clamp, fan condenser, Painting of canopy (both Upper & Lower) with one coat of synthetic enamel paint (White colour for ceiling fan) with and including and replacement of copper flexible cord twin core of suitable length not exceeding 0.5 meter length from ceiling rose to ceiling fan including assembling all repair parts of fan and testing it for smooth functioning with and including taking down of ceiling fan and refixing the same in new/ same position complete all as specified and as directed.
Supply and Fix louver shutter (with Mosquito net made out Aluminium wire mess ) made out GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire ) for Exhaust fan 250mm sweep including proper fixing with screw in wall including cutting hole in the wall and finishing it with appropriate cement finish complete all as specified and directed.
S & F Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size including taking down old unsv down rod complete all as specified and directed.
S & F Fan blade for Ceiling fan of 1200mm sweep of white colour including taking down old unsv fan blade complete all as specified and drected.
Taking down old Unsv DB of any type & any capacity complete all as specified and directed
S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.
S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. make- L&T/Havells/C&S/legrand/hager.
Taking down old Unsv MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed
S&F of including taking down MCB SPN 40-63A, 240 Volts, 50 hz, 10 KA 'c' series.
S & F MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.
S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S
S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : L&T/Standard/Havells
Taking down the existing Unserviciable point wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with conduit/casing caping, along with all connected accessories complete all as directed.
M&L concealed point wiring for one light point/fan point/bell point with 1.5Sqmm (Nominal Area) PVC insulated unsheathed cable FRLS grade with copper conductors, single core, multi stranded 1100 volts,ISI marked (IS 694) (For phase, neutral) drawn through and 20mm dia PVC rigid conduit ISI marked, heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches , sockets etc, including 1.5sqmm FRLS multi stranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth complete all as specified. Note:- All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) as directed by the Engineer-in-Charge.
Ditto as per Item No 170 above but for One 3 pin 5 Amp socket outlet on the same board
Ditto as per Item No 170 above but for One 3 pin 5 Amps socket out let on independent board
Ditto as per Item No 170 above but for one light point controlled by two two way switches
All as per Item No 170 here-in-before but wiring with 4.0 sqmm including 2.5 sqmm PVC insulated, unsheathed multistanded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected common earth dolly for one 3/5 pin 15 Amps socket out let on independent board
Ditto as per Item No 170 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.
S&F of modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG
S&F modular switch, 16 Amp flush type 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S & F in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified . Make- Anchor/Leader/Standard
S&F in repair switch piano type, 5 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair switch piano type, 5 Amp. SP, two way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified. Make- legrand/Anchor/ Havells
S&F in repair socket outlet 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair switch piano type, 15 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair switch bell push, flush type, 5 Amp all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F in repair bell, AC, 230 V, SP, ding dong type all as directed & specified. Make Anchor/leader/ Bajaj
S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.
Supply and fix, including taking down lamp holder insulated body with back plate batten/angle fittings all as specified and directed
S& F exhaust fan of sweep 250 mm metallic body complete all as specified and directed. Make- Crompton/Bajaj/Usha
Supply and fixing water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 25 Ltrs storage capacity complete with fixing accessories.
Taking down submain wiring of any type complete including all its accessories complete all as specified and directed.
M&L for concealed sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.
Taking down old unsv LED lights of any wattage , any type including all its accessories complete all as specified and directed.
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No BS9WLED865SPCWH or equivalent in Philips/Havells/CG/Orient all as directed by EIC.
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH or equivalent in Philips/Havells/CG/Orient all as directed by EIC.
S & F 15 Watt LED Bulb, B22 base, 3 star, colour temp 6500k, including taking down old unserviceable bulb all as specified and directed by . make-Havells /phillips/bajaj
S & F angle bulb holder for LED fitting, B22 base, including taking down old unserviceable type holder all as specified and directed .
S&F 25 W LED ,IP 66 ,230V environment friendly with operating temperature -10 to 50 degree celsius, operating voltage range 140 to 270 Volts, system lumen > 2500, colour temperature >= 5700K suitable for pole dia 43mm (max) including GI bend Pipe of length 1.5 Mtr fit for mounting including all its accessories of Crompton Greaves Cat log No ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in Surya cat No SLE UL 25W IP66 NGN or equivalent make of Havells/Philips/Bajaj, complete all as specified and directed.
S&F modular metal flush box of module 1/3/2 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.
S&F modular metal flush box of module 4 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.
S&F of Modular metal flush box of module 6 /8flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.
S&F of Modular white cover plate with frame of module 1 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.
S&F of Modular white cover plate with frame of module 2/3flush ISI marked Havells or equivalent make of Anchor all as specified and directed.
S&F of Modular white cover plate with frame of module 4 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.
S&F of modular white cover plate with frame of module 6 ISI marked Havells or equivalent make of Anchor all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
Chinmay Traders
M/S Deep-Jeet
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .