Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.0 LAccepted-AOC | L1 | Accepted-AOC Work completed | |
| 2 | L2₹97.4 L+₹16,950.01 (0.17%)Rejected-Finance MAIN BAZAR PAONTA SAHIB TEHSIL PAONTA SAHIB DISTRICT SIRMOUR H P | PAONTA SAHIB | SIRMOUR | HIMACHAL PRADESH | L2 | Rejected-Finance L2 | |
| 3 | L3₹97.8 L+₹56,458.20 (0.58%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹93.5 L
EMD Value
₹1.3 L
Closing Date
27 Feb 2023, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer HPPWD Division Paonta Sahib District Sirmour (HP)
).(SH-Repair of pot holes by providing and laying WBM G-III, Correction layer and 30mm thick bituminious concrete in Km. 0/0 to 1/0, 5/0 to 6/0, 8/0 to 9/0) Under AMP for the year 2023-24.
2023_PWD_69128_3
Tender/2022-23-13783-13832 dated 15.02.2023
Open Tender
Civil Works - Roads
Item Wise
60 days
Paonta Sahib
Please refer tender document
14 documents required · 14 mandatory
₹2,000
₹1.3 L
6 May 2023
17 Feb 2023
27 Feb 2023
17 Feb 2023
27 Feb 2023
17 Feb 2023
Amount
Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickmness, hand packing, roling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening/binding materials to fill up the interstices of course aggregate, watering and compacting to the required density grading-III as per technical specification clause 405 by manual means wearing 50-25mm(fifty to twenty five milimetres) size, including all leads, lifts and carriage of materials, as per entire satisfaction of Engineer-in-charge.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (Zero decimal seven zero to one kilogramme per square metre) using mechanical means as per Technical Specification Clause 502 including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm (Zero decimal two five to zero decimal three zero killogramme per square metre) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.
Providing and laying 30mm.(Thirty milimetre)thick bituminous concrete using crushed stone agregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and roling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification,, complete and as per directions of Engineer-in-charge 40/50mm(forty/fifty milimetres)compacted thickness with bitumen of grade VG-30 @ 5.5%(five point five percent)(percentage by weight of total mix) and lime filler @ 3% (three percent)(percentage by weight of aggregate) prepared in batch Type Hot Mix Plant of 100-120 TPH capacity, inluding all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and laying of hot applied thermoplastic compound 2.5mm.(two poiint five milimetres) thick including reflectorising glass beads @ 250 gms.(at the rate of two hundred fifty grams)per square metre area, thickness of 2.5mm.(two point five milimetre) is excllusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Chanana Cont. Works
S.S. Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .