SPL REPAIRS TO UNSERVICEABLE CI/GI PIPE LINE JCOs/ORs MD ACCN AT LANCER LINES(SECTOR C)AREA AND SPL REPAIRS/REPLACEMENT CI/GI PIPE LINE AND MISC ITEMS AT VIDHYA VIHAR AND NHQ AREA AT EME SCHOOL VADODARA UNDER GE(A) VADODARA.

Amount

Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for foundation or for taking out / laying of CI /GI pipe line in trenches & getting out in soft / loose soil.

Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25cm in soil.

Removing excavated material to a distance not exc 50mtr and depositing where directed at level n exc1.5 mtr above the starting point

Taking up CI pipe line from trenches including burning of lead joint, removing of lead, complete all as directed of following bore of pipe :

150 mm bore

100 mm bore

80 mm bore

Supplying, laying, jointing & testing Ductile iron Pipes ,special class – K 7 ISI marked (IS-8329-2000 Reaffirmed -2005 Eddition 4.1) suitable for push on joints supplied with rubber gaskets , with sockets and cement mortar lining and metallic zinc coating inside and with finishing layer of bitumenous paint outside , without polyethelene sleeves but including Push on joint supplied with EDPM rubber gasket conforming to IS 5382-1985(reaffirmed-2003) with dual hardness of type 2( bulb) and type-5 (Heel) quality , laid in trenches all as specified and as directed complete of following size:

150 mm bore

100 mm bore

M & L for caulking of lead joint of spigot and socket cast iron pipe incl providing lead wool and making joint leak proof including necessay earth work/excavation and making good disturbed site, of following dia pipe as directed.

150 mm bore

100 mm bore

80 mm bore

Taking up GI steel tubing /PPR pipe from trench/walls etc including all fittings for following bore of pipe:

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

S & F to wall/trenches GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc for following bore of pipe complete all as specified :

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Re fixing/ Relaying on wall/trenches GI steel tubing / PPR pipe including all fittings such as Tees, elbow, bends etc for following bore of pipe complete all as specified :

50 mm bore

25 mm bore

S&F DI fittings, bends (any type radius & angle), tappers any type (straight bend increasing or decreasing or double socket etc) tee pieces single branch ‘Y’ junction double branch cross (all sockets or socket & spigot) collars caps plug etc conforming to IS 9523-2000 with external bitumen coating and internal cement mortar lining and metalic zinc coating, up to 150 mm bore for spigot & socket and socket pipes.

Cutting CI pipes and reducing to required length in position for insertion of tees, branches etc complete all as directed:

150 mm bore

100 mm bore

80 mm bore

S&F in repair cast iron sluice valve both ends flanged, class PN-1.6 conforming to IS-14846 with stainless steel spindle including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) complete of following sizes :

150 mm bore

100 mm bore

80 mm bore

S & F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for following bore of pipe

50 mm bore

40 mm bore

25 mm bore

20 mm bore

S & F in repair Gun metal foot valve 80 mm dia all as specified and as directed

M&L for brick masonry valve pit chamber of size 450 mm X 450 mm X 600 mm (internal dimension) complete with 230 mm brick wall, PCC 1:4:8 type D2 100 mm thick floor bed, PCC 1:3:6 type Ci coping, MS cover having MS angle iron frame of size 50mm x 50mm x 6mm and 3.20 mm MS sheet top cover openable by providing hinges including neccesory locking arrangement and locks and handle made out of 25X6 mm flat iron, rendering 15 mm thick in CM 1:4 complete and painting MS articles with two coat of black bituminous paint over a one coat red oxide primer including demolition of existing valve chamber

Supply, install and commisioning of Pumping sets, horizontal split case pump in size 65 x 50 mm and capacity of 400 LPM, Bronze impeller, coupled with electric motor, 7.5 KW/10 HP, 1450 RPM, not less than head 50 mtr , 3 Phase Std Ind Foot mounted with Base frame and flexible coupling including star delta starter suitable for pump set 10 HP, three phase 415 volts, 50 Hz Relay range 6-10A and including necessary PCC foundation for pump and motor and necessary connection motor to starter including all accessories i.e wires and lugs in suitable size and capacity complete all as specified and directed by Engineer-in-Charge. (Make :- Kirloskar, KSB, CG and equivalent make)

M & L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 2.25 m below ground level connected to and including galvanised iron strip 25X 4 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

Shree Vaishno Enterprises

LAXMI CORPORATION