PROVISION OF DEFICIENT EDUCATION AND ADMINISTRATIVE BUILDING AT SFNA, NAVAL BASE KOCHI.

Amount

Total amount of Sch 'A' part-I ( Buildings/Structures)

Total amount of Sch 'A' part-II (Excavation, earthwork,Site clearance & Develoment)

Total amount of Sch 'A' part-III (Internal Water Supply)

Total amount of Sch 'A' part-IV ( Internal Electrification)

Total amount of Sch 'A' part-V ( External Water Supply)

Total amount of Sch 'A' part-VI ( External Electric Supply)

Total amount of Sch 'A' part-VII ( Road/Hardstanding)

Total amount of Sch 'A' part- VIII (Sewage Disposal)

Total amount of Sch 'A' part- IX (Area Drainage)

Total amount of Sch 'A' part- X (Fencing and Gate)

Total amount of Sch 'A' part- XI (Lightining Protection)

Total amount of Sch 'A' part-XII (Demolition and dismantling)

Sch 'A' Part- XIII(MISCELLANEOUS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Boring for cast-in-situ bored piles of 500mm dia to any depth through any type of soil/strata by DMC method using bentonite slurry including removal of bored materials to place outside MD land all as specified and as directed Note:-The rate shall include mobilisation,erection,dismantling and demobilisation of equipment for pile boring including all labours and material. Nothing extra shall be payable for mobilisation of equipment seperately.

RCC with ready mix concrete(RMC) M30 grade with min 400Kg cement per cum in cast in situ bored pile of any length/any sections complete all as specified and as shown on drg including non destructive integrity test on all pile as per IS 2911 part IV.Note:-(i) Reinforcement will be measured and paid separately under relevant items

RCC with ready mix concrete(RMC) M30 grade in pile cap , grade beam complete all as specified and shown on drg. Note:-(i) Reinforcement will be measured and paid separately under relevant items

CRS/HCRS/CRM TMT bars as in main reinforcement conforming to IS 1786 as in piles including cutting, bending, welding, tying, assembling, placing, maintaining in position the reinforcement cages complete all specified and as directed.

As per above item no.17 but as in helicals of pile reinforcement including rings and necessary tack welding to pile reinforcement at all points of contracts.

CRS/HCRS/CRM TMT bars in reinforcement 10mm dia and over including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and shown on drgs as in grade beams, slab and pile caps.

CRS/HCRS/CRM TMT bars 5mm dia and over upto and including 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and shown on drgs as in stirrups of grade beams and pile caps.

PCC (1:4:8) type D2 using 40mm graded stone aggregate for concrete layer below pile caps/grade beams and foundation complete all as specified and shown on drgs.

Providing testing equipment & load and testing of 500mm dia bored pile (Initial Load test) all as per IS including removing the testing equipments from site after testing is completed all as specified and directed.

Providing testing equipment & load and testing of 500mm dia pile (Routine Load test) all as per IS including removing the testing equipments from site after testing is completed all as specified and directed.

Formwork to sides of pile caps , grade beams rough finished surface of concrete flat all as specified .

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep or area not exceeding 10 sqm on plan in soft/loose soil including bailing out/pumping out water on account of spring/rain or any other causes using any method as required and as directed by Engr-in-Charge for pile caps/grade beams/ raft foundation etc all as specified and shown on drawings.

Returning filling in around pile cap, plinth beams, raft foundation etc using excavated soil including spreading levelling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of surplus soil to a distance exceeding 50m and not exc. 100m deposited as directed..

INTERNAL ELECTRIFICATION: Point wiring using approved colour coding as per IS with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI marked including heavy duty PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked including modular GI flush box of suitable size with inner and outer white plastic plate (Same make of approved switch and socket) including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-(NOTE: Switch and socket shall be measured and paid for separately):-(a) One light/Ceiling Fan/exhaust fan point controlled by one 5/6 amps one way switch.

(b) All as per item No.28 here in before but for One Socket outlet, three/five pin, 5 Amp, independent controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin.

(c) All as per item No.28 here in before but for One Socket outlet, three/five pin, 5 Amp, controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on the same board with other switches, sockets, fan regulators etc.

(d) All as per item No.28 here in before but for One Bell/Buzzer point controlled by one 5/6 Amps bell push.

(e) All as per item No.28 here in before but for One light point controlled by 2 Nos, 2 Way switches 5/6 Amps.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI marked including heavy duty, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked including modular GI flush box of suitable size with inner and outer white plastic plate (Same make of approved switch and socket) , including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent:(NOTE: Switch and socket to be measured and paid for separately)

Ceiling fan 1200mm sweep copper wound having minimum 5 star rating , including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from ceiling rose/ connector to fan all as specified and as directed by the Engineer-in-Charge.Note: Make shall be either of Bajaj/ Crompton/Khaithan

Exhaust fan 250 mm sweep 230 Volts AC 50 Hz PVC body with copper wound motors and PVC louvers, including connecting up from ceilinf rose with 3 core flexible copper cable, PVC sheathed of size 1.5 sqmm, complete all as specified and directed at site.Note: Make shall be either of Bajaj/ Crompton/Khaithan

LED Batten light fitting with extruded aluminium housing provided with polycarbonate diffuser and integrated electronic driver, 18/20W Havells model Endura Linear Neo or eqvt in Philips/Wipro/ Osram

LED Batten light fitting with extruded aluminium housing provided with polycarbonate diffuser and integrated electronic driver,22W Havells model Endura Linear Neo or eqvt in Philips/Wipro/ Osram

LED Batten light fitting with extruded aluminium housing provided with polycarbonate diffuser and integrated electronic driver,10W Havells model Endura Linear Neo or eqvt in Philips/Wipro/ Osram

LED slim Surface mounted light fitting diecast body and diffuser and electronic driver,6W Make:Havells model Comet Round or eqvt in Philips/Wipro/ Osram

LED slim Surface mounted light fitting diecast body and diffuser and electronic driver, 12W. Make:Havells model Comet Round or eqvt in Philips/Wipro/ Osram

LED recessed type light fitting with aluminium housing and diffuser and electronic drive suitable for Armstrong/ Grid ceiling of size 595mmx595mmx65mm or 2'x2',42W. Make: Havells model Venus Neo HE or eqvt in Philips/Wipro/ Osram

LED street light fitting with pressure die cast aluminium housing and acrylic cover as diffuser, having IP 66 protection of 30 Watt complete including fixing with GI Bracket made of 43mm outer dia GI Pipe including fixing clamps etc and wiring from junction box/ceiling rose with 3 core flexible copper wire, 1.5 sqmm complete. Make: Havells model Endura Citylite Platinum or eqvt in Philips/Wipro/ Osram

Vertical DB 8 way,TPN, double door , suitable for MCCB 4 Pole as incomer, with bus bar, neutral links and blanking plates etc. all as specified and directed by Engr-in-Charge Note :- Incoming MCCB and Out going MCB shall be measured and paid seperately under relevant items.Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider.

TPN DB 6 way, double door IP 43 protection, with 200A rated busbar, earth termination complete all as specified and as directed by the Engineer-in-Charge.Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

SPN DB 8 way, double door IP 43 protection, with 200A rated busbar, earth termination complete all as specified and as directed by the Engineer-in-Charge. Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

SPN DB 4 way, double door IP 43 protection, with 200A rated busbar, earth termination complete all as specified and as directed by the Engineer-in-Charge..Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

MCCB 4 Pole with fixed thermal and magnetic settings, 160 Amps, 415 Volt 50 HZ 16 KA all as specified and as directed by the Engineer-in-Charge..Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

MCB TP 63 Amps 415V "C" Series all as specified and as directed by the Engineer-in-Charge.Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

MCB TPN 63 Amps 415V "C" Series all as specified and as directed by the Engineer-in-Charge.Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

MCB SP 06 to 32 Amps 240V "C" Series all as specified and as directed by the Engineer-in-Charge.Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

MCB SPN 06 to 32 Amps 240 V "C" Series all as specified and as directed by the Engineer-in-Charge. Make shall be either Havells/ L&T/ Legrand/ ABB/ Siemens/ Schneider

Submain wiring with 4 runs of 10sqmm(for phases and neutral) multistranded copper conductor PVC (FRLS) insulated unsheathed with and 2 runs of 10 sqmm multistranded PVC insulated unsheathed copper conductor (as earth continuity conductor) connected to common earth dolly drawn through and incuding PVC conduit 32mm medium grade ISI marked with accessories. Note: 06 runs of conductors and one run of PVC conduit shall be measured as one run only

Submain wiring with 2 runs of 4 sqmm(for phases and neutral) multistranded copper conductor PVC (FRLS) insulated unsheathed with and one run of 4 sqmm multistranded PVC insulated unsheathed copper conductor (as earth continuity conductor) connected to common earth dolly drawn through and incuding PVC conduit 20mm medium grade ISI marked with accessories.Note: 03 runs of conductors and one run of PVC conduit shall be measured as one run only

Internal Electric supply for equipments:-Submain wiring with 4 runs of 6 sqmm single core (for 3phases and neutral)using multistranded copper conductor PVC (FRLS) insulated unsheathed with and including 2 runs of 4 sqmm multistranded PVC insulated unsheathed copper conductor (as earth continuity conductor) connected to common earth dolly drawn through and incuding PVC conduit 20mm medium grade ISI marked with accessories.Note: 04 runs of 6 sqmm copper cable,02 runs of 4 sqmm copper cable and one run of PVC conduit shall be measured as one run only

Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 A complete all as specified and as directed by the Engineer-in-Charge.

Double door MCB DB TPN 6 way including insulated busbars assembly suitable for MCCBs upto 125A as incomer complete all as specified and as directed by the Engineer-in-Charge.

4 pole MCCB 100 Amp,50 Hz , 415 V with rupturing capacity 25 KA complete all as specified and as directed by the Engineer-in-Charge.

32 Amps TP MCB including connections complete all as specified and as directed by the Engineer-in-Charge.

Internal Water Supply :-Supply and fix bip tap with wall flange complete of make Jaguar Cat part No CQT-23047 or equivalent in Zoloto/Leader all as specified and as directed by the Engineer-in-Charge.

External Electric Supply:- Supply, installation, testing and commissioning of 11 KV compact Sub Station with non extensible RMU consisting of 1 No manually operated 11 KV/630 Amps VCB in SF6 insulated stainless enclosure, HT Cables/Bus bar, 1 No transformer 315 KVA,11KV/433 CRT dry type , copper wound three phase AN cooled Vector DYN-11 with off circuit tappinng from +5% to -10% in steps of 2.5% WTI, metering cubic with suitable ratio CTs 3 Nos , PT 1 No,space heater and associatd LT ACB of suitable capacity complete all as specified and directed at siite. Note:- Necessary civil works like PCC pedestal,Excavation & earth work deemed to be included in rate quoted.

Supply, installation, tsting and commissioning of 11 KV, 630 A, 20 KA, motor operated, compact, outdoor, both side extensible, non drawout type, +CCV+(02 Nos .Load break switch outgoing and 01 No. Fixed type motor operated VCB) safe plus compact gas insulated Ring main unit,including extension of existing HT panel and all connected works,all live parts enclosed in a robotically welded stainless steel tank of IP 67 class of protection including coupling accessories,make and model to match with the existing RMU in the substation including all connected civil works for foundation and pedestal of suitable size including disconnection of cables from the existing VCB and connection complete all as specified and diretced.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galavanised steel strip or wire armoured, electric power cable, heavy duty with stranded aluminium conductor, 11000 volts(earthed) grade of size 3 core 185 sqmm complete all as specified and as directed.

Cable jointing kit for 11 KV grade Cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3core XLPE, armoured, Aluminium conductor cable of size of 185 sqmm complete all as specified and as directed.

Taking out the existing HT under ground cable carefully without any damage, wear and tear for rerouting all as directed at site. Note: Earth works, Cable cover and Sand cushioning will be measured and paid separately under respective items.

Laying only XLPE insulated screened, PVC bedded galavanized steel strip or wire armoured, electric power cables(heavy duty) 11000 Volts grade with strandered aluminium contractor of size 185 Sqmm 3 core obtaned fro item No 64 here in above including all accessories such as nuts, bolts, washer etc. complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded, galavanised steel strip or wire armoured, electric power cable, (heavy duty)1100 volts gradewith with stranded conductor of the size 300 sq mm 3.5 core including cable glands, aluminium lugs, nuts, bolts,washers, etc.. and connections complete all as specified and as directed.

All as per item No. 66 above but of size 240 sq mm 3.5 core

All as per item No. 66 above but of size 16 sq mm 4 core

Taking out the existing LT cable of any type/size carefully without any damage for rerouting all as directed at site including disconnection Note: Earth works, Cable cover and Sand cushioning will be measured an dpaid separately under respective items.

Item No. 70 Contd......(a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1 1/2 times of the incoming capacity with provision of extension and mounting on porcelain support. (b) MCCB FP 630 amps, 50 KA, 415 Volts, 50 Hz = 01 No Incoming) (c) MCCB FP 400 amps, 50 KA, 415 Volts, 50 Hz = 02 No (Outgoing) (d) MCCB FP 63 amps, 25 KA, 415 Volts, (adjustable TM range) 50 Hz = 02 Nos (e) Digital Multification meter with all accessories - 1 No. (f) Insulated Aluminium bus bars of suitable size shall be provided from the main bus bar to the out going MCCBs. (g) RYB indicating lamp, LED type - 06 sets. (h)MCCB FP 100 Amps,25 KA,415 volts(adjustable, TM range)50Hz=02 Nos

All as per item no 70 above but indoor wall mounted type consisting of following items. (LT Panel 2) (a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1/1/2 times of the incoming capacity with provision of extension and mounting on porcelain support. (b) MCCB FP 400 Amps, 50 KA, 415 Volts, 50 Hz = 01 No (incoming) (c) MCCB TPN 125 Amps, 25 KA, 415 Volts, (adjustable TM range) 50 Hz = 06 Nos (d) Digital Multifunction meter with all acessories - 1 No (e) Insulated Aluminium bus bars of suitable size shall be provided from the main bus bar to the out going MCCB's. (f) RYB indicating lamp, LED type - 07 sets

Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqm complete all as specified and directed at siite.

External Water Supply:- Electric driven mono block type pump sets, capable of delivering 5-13 LPS at 24-37 Meter head directly coupled with three phase induction motor ,AC, 50 Hz,415 volt , not less than 7.5 HP,50mmx40mm,including GI suction line,suitable size flanged foot valve,fixed with nuts,bolts,washers etc.inclusive of suitable capacity DOL starter complete with necessary connection from starter panel to motor,foundation as recommended by manufacturerer and all connected works complete all as specified and as directed.

Taking up or down CPVC tubing upto 75 mm and connections,including cleaning for refixing complete all as specified and as directed. (Note:The earth works for taking up of pipes will be measured and paid seperately)

Supply and lay pipe ductile iron with socket and spigot ends including specials,class "K-9"150mm(6")dia complete all as specified and as directed.

Construction of 200mm thick PCC solid block wall masonry valve chamber of size 750x750x750mm built in CM 1:6 with 100mm thick PCC foundation 1:2:4 type B-1 coping 50mm thick finished even and smooth,rendering 10mm thick in cement mortar (1:4),finished fair and even externally including excavation earth work in any strata,6mm thick MS sheet cover fixed on angle iron frame 25x4mm embedded in PCC coping with locking arrangement and mild steel hold fast, mild steel handles and painting to steel surface with two coats of black bituminous paint over one coat of red oxide primer etc.complete all as specified and as directed.

Supply, install, testing & commissioning factory made and tested, CPRI approved LT feeder pillar, outdoor type,weather & vermin proof, wall mounting type suitable for 440 Volts, 3 Phase, 4 wire 50 Hz AC supply system, IP-54 class protection and made of 2 mm CRCA mild steel sheet, 50x50x6 mm angle iron frame, hinged doors, front opening and locking arrangement with necessary bus bar arrangement with insulated aluminium bus bar installed on epoxy insulators housed in separate bus bar chambers covered with heat shrinkable sleeves with necessary bus bar tapings, panel duly powder coated on the outside and inside including cable glands, lugs, washers and nuts & bolts of suitable sizes for incoming and outgoing cables all as speciied and directed including the following. (Motor control panel) (a) Bus bar RYBN 100 Amp capacity - 01 Set (b) MCCB 63 Amp 4 pole 16 KA - 01 No (c) MCB TP 32 Amps - 02 Nos (d) MCB SPN 16 Amps - 01 No (e) Provn of fixing satrters - 02 Nos (f) LED indicator lamp RYB - 01 Set (g) Digital voltmeter (0-500) V - 01 No (h) Digital ammeter (0-100) A - 02 Nos

Road/Hardstanding:- Granular sub base (GSB), 150 mm thick deposited,spread,watered and rolled by using 8 to 12 tonne power roller to form a unform surface complete all as specified and as directed .

WMM ,75mm (compacted thickness) in runway/road,with granite coarse aggregate of approved grading,mixed with stone dust, spread,rolled and consolidated to required camber and gradient with 8 to 12 tonne power roller to form a uniform surface complete all as specified and as directed.

Machine cut granite stone of size 600x600x40mm of approved colour/type laid over sand cushion (sand measured seperately) in hard standing complete all as specified and as directed .

Planting Mexican grass in joints of granite slabs complete all as specified and as directed .

Air Conditioning:-Hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating inverter type of capacity 1.5 TR including supplying and installing complete all as specified and as directed.

Hi wall split unit 2 ton indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating inverter type of capacity 2.0 TR including supplying and installing complete all as specified and as directed.

Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of plus or minus 2.5% with 5 star rating,thermal overload protection,fail safe circuit protection and of capacity 5.0 KVA complete all as specified and as directed.

Wiring for circuit/submain wiring alongwith earth wire with cables of size 2x4 Sqmm &1x4 Sqmm earth wire FR PVC insulated copper conductor,single core cable in surface/recessed in and including PVC conduit as required complete all as specified and as directed.Note: 03 runs of 4 sqmm conductors and one run of PVC conduit shall be measured as one run only

Wiring for circuit/submain wiring alongwith earth wire with cables of size 4x25 Sqmm & 2x16 Sqmm earth wire FR PVC insulated copper conductor,single core cable in surface/recessed in and including PVC conduit as required complete all as specified and as directed.Note: 04 runs of 25 sqmm conductors and 02 runs of 16 sqmm conductors and one run of PVC conduit shall be measured as one run only

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 25/32A complete all as specified and as directed.

Double door MCB DB TPN 6 way including insulated busbars assembly suitable for MCCBs upto 125 A as incomer complete all as specified and as directed.

4 pole MCCB 125 Amp,50 Hz,415 V with rupturing capacity 25 A complete all as specified and as directed.

MCB SPN 25A,240V,10KA complete all as specified and as directed.

MCB SPN 32A,240 V,10KA complete all as specified and as directed.

Provision of drain pipe of size 20mm with low density polyethylene pipes (LDPE)of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors or at any other indicated situation etc complete all as specified and as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as pecified and as directed.

MISCELLANEOUS ITEMS:-Two module flush metal GI box, modular type of make legrand cat part no 689000 complete all as specified and as directed.

Double RJ11 modular Telephone socket of make Legrand cat part no 675544 or r complete all as specified and as directed.

Modular TV socket of make legrand for 1 module cat part no 675546 complete all as specified and as directed.

PVC nonmetallic conduit rigid 20mm dia bore ISI marked (on surface) exclusive of boxes ( junction/terminal) with and including conduit accessories and all fittings such as tees, bends, elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc.complete all as pecified and as directed.

PVC nonmetallic conduit rigid 25mm dia bore ISI marked (on surface) exclusive of boxes ( junction/terminal) with and including conduit accessories and all fittings such as tees, bends, elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc.complete all as pecified and as directed.

Water cooler:-Water cooler with inbuilt UV pruifier fully stainless steel Electric driven (single phase) having approx storage capacity of 80 litres and nominal cooling capacity of 40 litres per hour , CFC free refrigerant all as per specification and upto the satisfaction of Engineer in charge.

Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of plus or minus 2.5% with 5 star rating,thermal overload protection,fail safe circuit protection and of capacity 4.0 KVA complete all as pecified and as directed.

Aviation obstruction light :- Aviation obstruction light LED type including necessary fixing arrangements and all necessory accessories complete all as specified and directed. (Make Bajaj Cat No. BGAV 302 LED or equivalent of other make specified in the list of manufacturer )

XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sq mm , 2core on poles/walls as cable for aviation obstruction light complete all as specified and as directed.

MCB DB SP 2 Way single phase 240 volt without bus bar complete all as specified and as directed.

Analog time switch (with battery back up)1P module,24 hours, program,brogrammable every 15 min,back up of 100 hours,current capacity 16A with 1 changeover complete all as specified and as directed.

6 Amps SP MCB including connections complete all as specified and as directed.

Arboriculture:-Bermuda grass (by digging method @ 7.50cm apart) over prepared surface with adequately developed root after providing anti termite treatment including preparation of surfaces,earth work excavation,removing suplus soil,filling of approved earth suitable for grassing 20cm thick after mixing of fertilizer/organic manure and regular maint of developed grass for one year after defects liability period complete all as specified and directed.

PPJOHN

Hemant Construction Co.

VARAHA INFRA LIMITED

UBC Engineers Pvt Ltd